254 SMO Pipe Fittings

254 SMO Buttweld Fittings distributor254 SMO Pipe Fittings supplier, 254 SMO Weld Fittings stock, 254 SMO Buttweld Fittings distributor in India, 254 SMO Pipe Fittings exporter, 254 SMO Elbow, 254 SMO Tee, 254 SMO Reducer

ASTM A403 UNS S31254, A403 UNS S31254, Alloy 254 SMO Pipe Fittings supplier, 254 SMO Buttweld Pipe Fittings dealers, 254 SMO Stub End

ASME SB 366 254 SMO Pipe Fittings supplier, A403 UNS S31254 Buttweld Pipe Fittings supplier in India, UNS S31254 Pipe Fittings, Alloy 254 SMO Weld Fittings suppliers in India, Alloy 254 SMO Fittings exporters in India, European Alloy 254 SMO Pipe Fitting, 254 SMO Butt Weld Pipe Fittings supplier

Buy from Alloy 254 SMO Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved 254 SMO Butt weld Pipe Fittings. Offer Best Price for 254 SMO UNS S31254 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 254 SMO Reducer, ASTM A403 Alloy 254 SMO Buttweld Fittings in Mumbai, India, Alloy 254 SMO Buttweld Fitting traders in India, 254 SMO Elbow Dealer in India. Supplier of 254 SMO Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 254 SMO Butt weld Pipe Fitting, ASTM A403 Alloy 254 SMO Fittings stockholder in India, ASME SA403M 254 SMO Stub End wholesaler in India, manufacturer of 254 SMO UNS S31254 Welded Fittings, A403 254 SMO Commercial Pipe Fittings manufacturer, Alloy 254 SMO Seamless Pipe Fittings Traders in India, Stockholder of 254 SMO Tee, 254 SMO Industrial Pipe Fittings, 254 SMO Pipe Elbow, 254 SMO Cap, 254 SMO Pipe Bends manufacturer in Rajkot, Gujarat, 254 SMO Tube Fittings Manufacturer

Contact 254 SMO Buttweld Fittings distributor, 254 SMO Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM A403 UNS S31254 254 SMO Pipe Fittings Price in India

Export Price List of ASTM A403 UNS S31254| ASTM A403 Alloy 254 SMO Buttweld Pipe Fittings Price List

Price of ASTM A403 Buttweld Fittings, 254 SMO Butt Weld Elbow

ASTM A403 254 SMO BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
UNS S31254 254 SMO PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
254 SMO PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

254 SMO Pipe Fittingsmainly used for high alloyed, stainless steel with outstanding corrosion resistance. 254 SMO Butt Weld Fittings are developed for use in halide-containing environment such as seawater. This material 1.4547 (UNS S31254 – 254 SMO®* – SS2378) used by many industries such as off shore, marine environment and within chemical industry.

254 SMO Buttweld Fittings are a high alloyed austenitic stainless steel with exceptionell  corrosion resistance. 254 SMO Buttweld Pipe Fittings are produced for use in  halide-containing environment such as seawater, hydrochloric acid and contaminated sulphuric acid. 1.4547 Pipe Fittingshave a superior resistance to uniform corrosion compared with common stainless steel, especially in acids containing halides.  UNS S31254 Pipe Fitting has a high content of alloy materials  which gives the steel exceptionally good resistance to pitting and crevice corrosion. The 254 SMO Pipe Fittings also have very good resistance to stress corrosion cracking.

These UNS S31254 Pipe Fittings are available in a various forms such as 254 SMO End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc. The cost of SS2378 Pipe Fittings are depends upon its contents.

Vishal Steel (India) manufactures an industry leading line of 254 SMO Pipe Fittings, 254 SMO weld fittings, 254 SMO Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in 254 SMO material. All 254 SMO elbows are mandrel formed to insure consistency. All our 254 SMO Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Get Free Quote

254 SMO Pipe Fittings supplier, 254 SMO Buttweld Fittings Supplier

254 SMO Pipe Fittings supplier, 254 SMO Buttweld Fittings Supplier (Original Factory Photo)

254 SMO 24" Long Radius Elbow | 254 SMO 24" Equal Tee SCH XXS | 254 SMO 10" SCH 160 Short Radius Bends | 254 SMO 24" Concentric Reducer SCH 80S | 254 SMO Unequal Tee 16" x 12" SCH 160 | 254 SMO Seamless Pipe Fittings | 254 SMO 100% X-Ray Welded Pipe Fittings | 254 SMO ANSI B16.9 Fittings | Seamless Reducing Tee, 254 SMO

Types of 254 SMO Buttweld Fittings

254 SMO Pipe Fittings Specifications

254 SMO Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS SIS GOST AFNOR EN
SMO 254 1.4547 S31254 2378 Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

Specification ASTM A403, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS S31254
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range 254 SMO Seamless Butt Weld Fittings: 1/2″ – 10″
254 SMO Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing 254 SMO Pipe Fittings in form of :
  • ASTM A403 254 SMO Equal Tee manufacturer
  • ASTM A403 254 SMO Nipple manufacturer in Mumbai
  • ASTM A403 254 SMO Long Radius Elbow manufacturer India
  • ASTM A403 254 SMO Reducing Tee manufacturer Maharashtra
  • ASTM A403 254 SMO Elbows manufacturer in Mumbai
  • ASTM A403 254 SMO Swage Nipple manufacturer in India
  • ASTM A403 254 SMO Short Radius Elbow suppliers in India
  • ASTM A403 254 SMO Reducer manufacturer in India
  • Exporter of ASTM A403 254 SMO Pipe Cap in India
  • ASTM A403 254 SMO Barrel Nipple manufacturer in India
  • ASTM A403 254 SMO 90 Deg Elbow suppliers in Mumbai
  • ASTM A403 254 SMO Concentric Reducer manufacturer in India
  • ASTM A403 254 SMO Reducing Nipple suppliers in Mumbai
  • ASTM A403 254 SMO 45 Deg Elbows manufacturer in India
  • ASTM A403 254 SMO Eccentric Reducer suppliers in Mumbai
  • ASTM A403 254 SMO Saddles manufacturer in India
  • ASTM A403 254 SMO Weld Rings suppliers in Mumbai
  • ASTM A403 254 SMO 180 Deg Elbow wholesaler in India
  • ASTM A403 254 SMO End Cap importers in India
  • ASTM A403 254 SMO 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM A403 254 SMO 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM A403 254 SMO Stubend manufacturer in India
  • Manufacturer of ASTM A403 254 SMO 5D Elbow manufacturer in India
  • Distributor of ASTM A403 254 SMO Piggable Bend manufacturer in India
  • Trader of ASTM A403 254 SMO Long Stubend manufacturer in India
  • Stockist of ASTM A403 254 SMO Tee manufacturer in India
  • Stockholder of ASTM A403 254 SMO Short Stubend Suppliers in India
  • ASTM A403 254 SMO Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM A403 254 SMO Bend manufacturer in Mumbai, India
  • ASTM A403 254 SMO Unequal Tee manufacturer in Mumbai, India
  • ASTM A403 254 SMO Weldolets manufacturer in Mumbai, India
  • ASTM A403 254 SMO Return Bends manufacturer in Mumbai
  • ASTM A403 254 SMO Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

254 SMO Long Bend with Radius – R = 3D, 5D & 10D
254 SMO Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

254 SMO Long radius Bend, 254 SMO Piggable Bend, 254 SMO Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved 254 SMO Pipe Fittings manufacturer in India
SABIC Approved 254 SMO Pipe Fittings supplier in India

254 SMO Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
254 SMO B/W Fittings Manufacturer in India, ANSI B16.11 254 SMO Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

254 SMO Pipe Fittings Make, Exporters & Stockist for

Top 254 SMO Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of 254 SMO Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of 254 SMO Pipe Fittings

  • ASTM A403 254 SMO Equal Cross manufacturer in India
  • 254 SMO Reducing Cross manufacturer
  • 254 SMO 90°/180°/45° Long Radius Elbow manufacturer
  • 254 SMO 90°/180°/45° Short Radius Elbow manufacturer
  • 254 SMO End Cap manufacturer in India
  • 254 SMO Pipe Cap manufacturer
  • 254 SMO Lap Joint Stub Ends manufacturer
  • 254 SMO Reducing Tee manufacturer in India
  • ASTM A403 254 SMO Collar suppliers in India
  • 254 SMO Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM A403 254 SMO Piggable Bend suppliers in India
  • 254 SMO 45° Long Radius Elbow
  • 254 SMO 45° Short Radius Elbow manufacturer in India
  • 254 SMO 180° Short Radius Elbow
  • 254 SMO Pipe Bends suppliers in India
  • 254 SMO Reducing Elbow manufacturer in India
  • 254 SMO Cross Fitting manufacturer in Mumbai, Maharashtra
  • 254 SMO Reducing Cross Fitting suppliers in India
  • 254 SMO SR Return Bend manufacturer in India
  • 254 SMO Seamless Reducing Tee
  • 254 SMO Couplings suppliers in India
  • 254 SMO Forged Pipe Reducer
  • 254 SMO Reducing Nipple manufacturer in India
  • ASTM A403 254 SMO Short Stubend manufacturer in Mumbai, Maharashtra
  • 254 SMO 1.5D Elbow suppliers in India
  • ASTM A403 254 SMO Outlet Tees and Crosses manufacturer in India
  • 254 SMO Concentric Reducer manufacturer in Mumbai, Maharashtra
  • 254 SMO Eccentric Reducer
  • ASTM A403 254 SMO Reducer manufacturer in India
  • ASTM A403 254 SMO 1D Elbow
  • 254 SMO 3D Elbow
  • 254 SMO 5D Elbow manufacturer in India
  • ASTM A403 254 SMO Lateral Tee suppliers in India
  • 254 SMO End Caps
  • 254 SMO Piggable Bends manufacturer in Mumbai, Maharashtra
  • 254 SMO LR Return Bend manufacturer in India
  • 254 SMO Threaded Elbow
  • 254 SMO Seamless Fittings manufacturer in India
  • 254 SMO Welded Pipe Fittings suppliers in India
  • ASTM A403 254 SMO Straight Tees
  • ASTM A403 254 SMO Barrel Nipple manufacturer in Mumbai, Maharashtra
  • 254 SMO 180° Long Radius Elbow suppliers in India
  • 254 SMO Forged/Plate Cut Rings
  • 254 SMO Fabricated Pipe Fittings exporters in India
  • 254 SMO Swedge Nipple manufacturer in India
  • 254 SMO Pipe Nipple manufacturer in India
  • 254 SMO Long Stubend suppliers in India

254 SMO 90° Elbow manufacturer in India

254 SMO 90 degree pipe elbow manufacturer254 SMO 90 degree pipe elbow suppliers, 254 SMO Elbows

254 SMO 90 degree elbow is a type of 254 SMO Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “254 SMO 90 Bend” or “Alloy 254 SMO Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. 254 SMO 90° Elbows are made of 254 SMO seamless tubes within the diameter range of DN 15 – DN 1000.

254 SMO 90 Degree butt weld elbows generally conform to ASTM A403 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

254 SMO Elbows other trade name: Alloy 254 SMO Elbow, ASTM A403 UNS S31254 Elbow, Alloy 254 SMO Elbow, 254 SMO Pipe Elbow, UNS S31254 Elbow

254 SMO Elbow 45° manufacturer in India

254 SMO 45 Degree Elbows manufacturer254 SMO 45 Degree Elbows suppliers

254 SMO 45 degree elbow is the 254 SMO elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. 254 SMO 45° Elbows are made of 254 SMO Seamless Tubes within the diameter range of DN 15 – DN 1000.

The 254 SMO 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. 254 SMO butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 254 SMO 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the 254 SMO butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

254 SMO 180° Returns manufacturer in India

254 SMO 180° Returns manufacturer254 SMO 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. 254 SMO Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All 254 SMO long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM A403 254 SMO 180° Long Radius Return
  • ASTM A403 254 SMO 180° Short Radius Return

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Reducing Tee manufacturer in India, 254 SMO Reducing Pipe Tee manufacturer

254 SMO Reducing Tee manufacturer254 SMO Reducing Tee suppliers, 254 SMO Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. 254 SMO straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. 254 SMO reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM A403 254 SMO Stright Tee
  • ASTM A403 254 SMO Reducing Tee

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Tee manufacturer in India, 254 SMO Equal Tee Manufacturer

254 SMO Tee manufacturer254 SMO Pipe Tee suppliers

Our 254 SMO butt weld pipe tees include 254 SMO butt weld straight tees and 254 SMO butt weld reducing tees. 254 SMO tees are available within the range of DN 15 – DN 600. Our 254 SMO butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an 254 SMO straight pipe tee. 254 SMO Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. 254 SMO Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. 254 SMO reducing tee can connect various sizes of pipes together in one pipe system.

254 SMO Concentric Reducers manufacturer in India, 254 SMO Reducer Manufacturer

254 SMO Concentric Reducers manufacturer254 SMO Pipe Reducer/ Reducers suppliers

Looking for 254 SMO Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of 254 SMO pipe reducer: 254 SMO concentric reducer and 254 SMO eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. 254 SMO reducers are made of 254 SMO seamless tube within the range of DN 15 – DN 1000.

254 SMO butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. 254 SMO eccentric butt welding reducer is a type of 254 SMO pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. 254 SMO concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas 254 SMO eccentric reducers have a parallel edge, which results in an offsetting center. 254 SMO Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Eccentric Reducers manufacturer in India

254 SMO Eccentric Reducers manufacturer254 SMO Eccentric Pipe Reducer/ Reducers suppliers

Looking for 254 SMO Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

 

 

254 SMO Long Radius LR Elbows manufacturer in India, 254 SMO LR Elbows manufacturer

254 SMO LR Elbows manufacturer254 SMO Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The 254 SMO long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. 254 SMO Short radius elbows have a center-to-end measurement equl to pipe diameter.

254 SMO long radius elbow costs less than a short radius fittings. 254 SMO Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM A403 254 SMO 45° Long Radius Elbow
  • ASTM A403 254 SMO 90° Long Radius Elbow
  • ASTM A403 254 SMO 180° Long Radius Elbow

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Short Radius SR Elbows manufacturer in India, 254 SMO SR Elbows manufacturer

254 SMO Short Radius Elbows manufacturer254 SMO Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an 254 SMO short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, 254 SMO short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM A403 254 SMO 45° Short Radius Elbow
  • ASTM A403 254 SMO 90° Short Radius Elbow
  • ASTM A403 254 SMO 180° Short Radius Elbow

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Pipe Cap Supplier, 254 SMO End Cap manufacturer

254 SMO Pipe Cap manufacturer254 SMO Pipe Cap/ End Cap suppliers

254 SMO Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant 254 SMO butt weld caps come in various sizes and schedules to fit your 254 SMO pipe and fitting needs.

254 SMO butt weld cap is a type of 254 SMO Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

254 SMO End Caps: cap, Seamless cap, Steel cap, 254 SMO Seamless cap, pipe cap, cap end

  • ASTM A403 254 SMO Seamless cap
  • ASTM A403 254 SMO Erw cap
  • ASTM A403 254 SMO Large size cap
  • ASTM A403 254 SMO Small size cap

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Stub End manufacturer in India, 254 SMO Stub Ends manufacturer

254 SMO Stub End manufacturers in India254 SMO Stub End suppliers

These 254 SMO Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, 254 SMO stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. 254 SMO Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

254 SMO Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

254 SMO Cross manufacturer in India, 254 SMO Pipe Cross manufacturer

254 SMO Cross manufacturers in India254 SMO Pipe Cross suppliers

We can supply 254 SMO pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of 254 SMO cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. 254 SMO Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: 254 SMO Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM A403/ ASME SA403 254 SMO UNS S31254

Hot Offer on 254 SMO Pipe Fittings in 2017-18

We are have a wide size range of 254 SMO Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of 254 SMO Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM A403 254 SMO Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM A403 254 SMO Pipe Fittings buyers

254 SMO Pipe Fittings Chemical Composition

ASTM A403 254 SMO Buttweld Fittings Chemical Properties

C Si Mn P S Cr Ni Mo N Cu
≤0.020 ≤0.80 ≤1.00 ≤0.030 ≤0.010 20 18 6.1 0.20 0.7

254 SMO Pipe Fittings Mechanical Properties

ASTM A403 Mechanical Properties of 254 SMO Buttweld Fittings

Metric units, at 20°C

Wall thickness Proof strength Tensile strength Elong. Hardness
Rp0.2a) Rp1.0a) Rm Ab) A2″ HRB
mm MPa MPa MPa % %
<5 ≥310 ≥340 675-850 ≥35 ≥35 ≤96
>5 ≥310 ≥340 655-850 ≥35 ≥35 ≤96

1 MPa = 1 N/mm2

Physical Properties of ASTM A403 254 SMO Pipe Fittings

Density: 8.0 g/cm3, 0.29 lb/in3

Thermal conductivity

Temperature, oC W/m oC Temperature, oF Btu/ft h oF
20 10 68 6
100 12 200 7
200 14 400 8
300 16 600 9.5
400 18 800 10.5
500 20 1000 11.5
600 21 1200 12.5
700 23 1300 13

Specific heat capacity

Temperature, °C
J/kg °C
Temperature, °F Btu/ft h °F
20 485 68 0.12
100 510 200 0.12
200 535 400 0.13
300 565 600 0.14
400 585 800 0.14
500 600 1000 0.14
600 615 1200 0.15
700
625
1400 0.15

Thermal expansion, mean values in temperature ranges (x106)

Temperature, °C
Per °C
Temperature, °F Per °F
30–100 16 86–200 9
30–200 16 86–400 9
30–300 16.5 86–600 9
30–400 16.5 86–800 9.5
30–500 17 86–1000 9.5
30–600 17 86–1200 9.5
30–700
17.5
86–1300 10

Modulus of elasticity, (x103)

Temperature, °C
MPa
Temperature, °F ksi
20 195 68 28.3
100 190 200 27.6
200 182 400 27.5
300 174 600 25.1
400 166 800 23.8
500
158
1000 22.5

254 SMO Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
FCC REVAMP PROJECT, ITALY 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
Furnace tube replacement BA-31001, FINLAND 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
TAR 2013, NETHERLANDS 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling
PROGETTO MAM, ITALY 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
SURINAME PROJECT, SURINAME 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
TAR 2012, NETHERLANDS 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling
EAD ENDESA – CTE BOCAMINA, CHILE 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
LIBONDO PROJECT, CONGO 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
PROGRAM 10+, POLAND Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON 254 SMO Pipe fittings in form of 254 SMO Long Radius Elbow, 254 SMO Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM A403 254 SMO Pipe fittings in form of ASTM A403 254 SMO Long Radius Return Bend, ASTM A403 254 SMO Short Radius Return Bend, ASTM A403 254 SMO Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY 254 SMO Pipe fittings in form of 254 SMO End Cap, 254 SMO Stub Ends, 254 SMO Pipe Nipple
MORON AMMONIA, VENEZUELA 254 SMO Pipe fittings in form of 254 SMO Equal Tee, 254 SMO Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY 254 SMO Pipe fittings in form of 254 SMO Pipe Cross, 254 SMO Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY 254 SMO Pipe fittings in form of 254 SMO Cross, 254 SMO Concentric Reducer
ARO KUWAIT EPC, KUWAIT 254 SMO Pipe fittings in form of 254 SMO Eccentric Reducer, 254 SMO pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA 254 SMO Pipe fittings in form of 254 SMO Pipe Coupling, 254 SMO Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied 254 SMO Buttweld fittings in form of 254 SMO End Cap, 254 SMO Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied 254 SMO Buttweld fittings in form of 254 SMO Stub Ends, 254 SMO Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied 254 SMO Buttweld fittings, UNS S31254 Buttweld Fittings in form of 254 SMO Buttweld fittings in forms of 254 SMO Equal Tee, 254 SMO Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied 254 SMO Buttweld fittings in form of 254 SMO Concentric Reducer, 254 SMO Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied 254 SMO Buttweld fittings, UNS S31254 Pipe Fittings in form of 254 SMO Collar, 254 SMO Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied 254 SMO Buttweld fittings in form of 254 SMO Short Radius Elbow, 254 SMO Return Bend, Elbow, 254 SMO Coupling

 

254 SMO Pipe Fittings Ready Stock

Products Size
254 SMO Elbows Long Radius 254 SMO Stub Ends

Sizes 1/2″-48″

254 SMO Elbows Short Radius 254 SMO Crosses
254 SMO Reducing Elbows 254 SMO Reducing Crosses
254 SMO 45° Elbows 254 SMO 180° LR Return Bends
254 SMO Tees 254 SMO 180° SR Return Bends
254 SMO Tees 254 SMO Pipe Bends / Piggable Bends
254 SMO Reducers 254 SMO Couplings
254 SMO Concentric Reducers 254 SMO Pipe Nipples
254 SMO Eccentric Reducers 254 SMO Forged/Plate Cut Rings
254 SMO 3D Elbow 254 SMO End Caps
254 SMO 5D Elbow 254 SMO Forged / Plate Circles


 

254 SMO Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

254 SMO Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, 254 SMO Pipe Fittings dimensions, 254 SMO Pipe Fittings dimension chart

WEIGHTS OF 254 SMO LONG RADIUS REDUCING ELBOWS SCHEDULE XS

NPS LBS KG
2-1½ 1.8 0.82
2-1¼ 1.65 0.75
2-1 1.5 0.68
2-3/4
2½-2 3.25 1.47
2½-1½ 2.9 1.32
2½-1¼ 2.75 1.25
2½-1
3-2½ 5.5 2.49
3-2 4.7 2.13
3-1½ 4.3 1.95
3-1¼
3½-3 8.2 3.72
3½-2½ 7.25 3.29
3½-2 6.3 2.86
3½-1½
3½-1¼
4-3½ 11.3 5.13
4-3 10.4 4.72
4-2½ 9.3 4.22
4-2 8.25 3.74
4-1½
5-4 18.4 8.35
5-3½ 17.1 7.76
5-3 16 7.26
5-2½ 14.7 6.67
5-2
6-5 30.5 13.83
6-4 26.9 12.2
6-3½ 25.4 11.52
6-3 24 10.89
6-2½
8-6 59.4 26.94
8-5 52.9 24
8-4 48.2 21.86
8-3½
10-8 101 45.81
10-6 85.8 38.92
10-5 77.7 35.24
10-4
12-10 149.1 67.63
12-8 134 60.78
12-6 116 52.62
NPS LBS KG

Notes:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

254 SMO Fittings, 254 SMO Pipe Fittings supplier in India, 254 SMO Pipe Fittings supplier in Rajkot, Gujarat, Supplier of 254 SMO Pipe Fittings, Trader of 254 SMO Buttweld Fittings in India, Distributor of 254 SMO Butt Weld Fittings Dubai, Stockist of 254 SMO Buttweld Pipe Fittings, 254 SMO Elbows exporters in India, UNS S31254 Buttweld Fittings, Alloy 254 SMO Pipe Fittings traders in India, UNS S31254 Elbow suppliers in India, 254 SMO Cap, Pipe Fittings available in 254 SMO Material, 254 SMO Weld Fittings Stock, Source for ASME SB 366 254 SMO Pipe Fittings, 254 SMO Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM A403 Buttweld Pipe Fittings in 254 SMO.