Alloy 20 Pipe Fittings/ Carpenter 20 Pipe Fittings

Alloy 20 Buttweld Fittings distributorAlloy 20 Pipe Fittings supplier, Alloy 20 Weld Fittings stock, Alloy 20 Buttweld Fittings distributor in India, Alloy 20 Pipe Fittings exporter, Alloy 20 Elbow, Alloy 20 Tee, Alloy 20 Reducer

ASTM B366 UNS N08020, B366 UNS N08020, Carpenter 20 Pipe Fittings supplier, Alloy 20 Buttweld Pipe Fittings dealers, Alloy 20 Stub End

ASME SB 366 Alloy 20 Pipe Fittings supplier, B366 UNS N08020 Buttweld Pipe Fittings supplier in India, UNS N08020 Pipe Fittings, Carpenter 20 Weld Fittings suppliers in India, Carpenter 20 Fittings exporters in India, European Carpenter 20 Pipe Fitting, Alloy 20 Butt Weld Pipe Fittings supplier

Buy from Carpenter 20 Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Alloy 20 Butt weld Pipe Fittings. Offer Best Price for Alloy 20 UNS N08020 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Alloy 20 Reducer, ASTM B366 Carpenter 20 Buttweld Fittings in Mumbai, India, Carpenter 20 Buttweld Fitting traders in India, Alloy 20 Elbow Dealer in India. Supplier of Alloy 20 Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Alloy 20 Butt weld Pipe Fitting, ASTM B366 Carpenter 20 Fittings stockholder in India, ASME SB366M Alloy 20 Stub End wholesaler in India, manufacturer of Alloy 20 UNS N08020 Welded Fittings, B366 Alloy 20 Commercial Pipe Fittings manufacturer, Carpenter 20 Seamless Pipe Fittings Traders in India, Stockholder of Alloy 20 Tee, Alloy 20 Industrial Pipe Fittings, Alloy 20 Pipe Elbow, Alloy 20 Cap, Alloy 20 Pipe Bends manufacturer in Rajkot, Gujarat, Alloy 20 Tube Fittings Manufacturer

Contact Alloy 20 Buttweld Fittings distributor, Alloy 20 Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N08020 Alloy 20 Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N08020| ASTM B366 Carpenter 20 Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Alloy 20 Butt Weld Elbow

ASTM B366 Alloy 20 BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
UNS N08020 Alloy 20 PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Alloy 20 PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

Alloy 20 Pipe Fittings, also known as Carpenter 20 Pipe Fittings and Incoloy 20 Pipe Fittings, is an austenitic nickel-iron-chromium alloy. These Alloy 20 Butt Weld Fittings, which also includes copper and molybdenum, is popular in the production of gasoline, solvents, explosives, chemicals, pharmaceuticals and food and synthetic materials.

Due to Alloy 20 Buttweld Fittings high nickel content (32-38%), there is some disagreement whether Alloy 20 Buttweld Pipe Fittings is a nickel or a stainless steel alloy. No matter what side of the discussion you fall on, it is clear that Alloy 20 Pipe Fitting is an excellent choice for a wide variety of industries and applications.

These UNS N08020 Pipe Fittings are available in a various forms such as 20Cb-3 End Cap, Stub Ends, Pipe Nipple, Incoloy Alloy 20 Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, UNS N08020 Return Bend, Elbow and Coupling etc. The cost of Alloy 20 Pipe Fittings are depends upon its contents. 

Vishal Steel (India) manufactures an industry leading line of Alloy 20 Pipe Fittings, Alloy 20 weld fittings, Alloy 20 Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Alloy 20 material. All Alloy 20 elbows are mandrel formed to insure consistency. All our Alloy 20 Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Get Free Quote

Alloy 20 Pipe Fittings supplier, Alloy 20 Buttweld Fittings Supplier

Alloy 20 Pipe Fittings supplier, Alloy 20 Buttweld Fittings Supplier (Original Factory Photo)

Alloy 20 24" Long Radius Elbow | Alloy 20 24" Equal Tee SCH XXS | Alloy 20 10" SCH 160 Short Radius Bends | Alloy 20 24" Concentric Reducer SCH 80S | Alloy 20 Unequal Tee 16" x 12" SCH 160 | Alloy 20 Seamless Pipe Fittings | Alloy 20 100% X-Ray Welded Pipe Fittings | Alloy 20 ANSI B16.9 Fittings | Seamless Reducing Tee, Alloy 20

Types of Alloy 20 Buttweld Fittings

Alloy 20 Pipe Fittings Specifications

Alloy 20 Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS EN AFNOR
Alloy 20 2.4660 N08020 NiCr20CuMo Z2NCUD31-20AZ

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N08020
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Alloy 20 Seamless Butt Weld Fittings: 1/2″ – 10″
Alloy 20 Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Alloy 20 Pipe Fittings in form of :
  • ASTM B366 Alloy 20 Equal Tee manufacturer
  • ASTM B366 Alloy 20 Nipple manufacturer in Mumbai
  • ASTM B366 Alloy 20 Long Radius Elbow manufacturer India
  • ASTM B366 Alloy 20 Reducing Tee manufacturer Maharashtra
  • ASTM B366 Alloy 20 Elbows manufacturer in Mumbai
  • ASTM B366 Alloy 20 Swage Nipple manufacturer in India
  • ASTM B366 Alloy 20 Short Radius Elbow suppliers in India
  • ASTM B366 Alloy 20 Reducer manufacturer in India
  • Exporter of ASTM B366 Alloy 20 Pipe Cap in India
  • ASTM B366 Alloy 20 Barrel Nipple manufacturer in India
  • ASTM B366 Alloy 20 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Alloy 20 Concentric Reducer manufacturer in India
  • ASTM B366 Alloy 20 Reducing Nipple suppliers in Mumbai
  • ASTM B366 Alloy 20 45 Deg Elbows manufacturer in India
  • ASTM B366 Alloy 20 Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Alloy 20 Saddles manufacturer in India
  • ASTM B366 Alloy 20 Weld Rings suppliers in Mumbai
  • ASTM B366 Alloy 20 180 Deg Elbow wholesaler in India
  • ASTM B366 Alloy 20 End Cap importers in India
  • ASTM B366 Alloy 20 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Alloy 20 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Alloy 20 Stubend manufacturer in India
  • Manufacturer of ASTM B366 Alloy 20 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Alloy 20 Piggable Bend manufacturer in India
  • Trader of ASTM B366 Alloy 20 Long Stubend manufacturer in India
  • Stockist of ASTM B366 Alloy 20 Tee manufacturer in India
  • Stockholder of ASTM B366 Alloy 20 Short Stubend Suppliers in India
  • ASTM B366 Alloy 20 Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Alloy 20 Bend manufacturer in Mumbai, India
  • ASTM B366 Alloy 20 Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Alloy 20 Weldolets manufacturer in Mumbai, India
  • ASTM B366 Alloy 20 Return Bends manufacturer in Mumbai
  • ASTM B366 Alloy 20 Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Alloy 20 Long Bend with Radius – R = 3D, 5D & 10D
Alloy 20 Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Alloy 20 Long radius Bend, Alloy 20 Piggable Bend, Alloy 20 Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Alloy 20 Pipe Fittings manufacturer in India
SABIC Approved Alloy 20 Pipe Fittings supplier in India

Alloy 20 Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Alloy 20 B/W Fittings Manufacturer in India, ANSI B16.11 Alloy 20 Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Alloy 20 Pipe Fittings Make, Exporters & Stockist for

Top Alloy 20 Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Alloy 20 Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Alloy 20 Pipe Fittings

  • ASTM B366 Alloy 20 Equal Cross manufacturer in India
  • Alloy 20 Reducing Cross manufacturer
  • Alloy 20 90°/180°/45° Long Radius Elbow manufacturer
  • Alloy 20 90°/180°/45° Short Radius Elbow manufacturer
  • Alloy 20 End Cap manufacturer in India
  • Alloy 20 Pipe Cap manufacturer
  • Alloy 20 Lap Joint Stub Ends manufacturer
  • Alloy 20 Reducing Tee manufacturer in India
  • ASTM B366 Alloy 20 Collar suppliers in India
  • Alloy 20 Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Alloy 20 Piggable Bend suppliers in India
  • Alloy 20 45° Long Radius Elbow
  • Alloy 20 45° Short Radius Elbow manufacturer in India
  • Alloy 20 180° Short Radius Elbow
  • Alloy 20 Pipe Bends suppliers in India
  • Alloy 20 Reducing Elbow manufacturer in India
  • Alloy 20 Cross Fitting manufacturer in Mumbai, Maharashtra
  • Alloy 20 Reducing Cross Fitting suppliers in India
  • Alloy 20 SR Return Bend manufacturer in India
  • Alloy 20 Seamless Reducing Tee
  • Alloy 20 Couplings suppliers in India
  • Alloy 20 Forged Pipe Reducer
  • Alloy 20 Reducing Nipple manufacturer in India
  • ASTM B366 Alloy 20 Short Stubend manufacturer in Mumbai, Maharashtra
  • Alloy 20 1.5D Elbow suppliers in India
  • ASTM B366 Alloy 20 Outlet Tees and Crosses manufacturer in India
  • Alloy 20 Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Alloy 20 Eccentric Reducer
  • ASTM B366 Alloy 20 Reducer manufacturer in India
  • ASTM B366 Alloy 20 1D Elbow
  • Alloy 20 3D Elbow
  • Alloy 20 5D Elbow manufacturer in India
  • ASTM B366 Alloy 20 Lateral Tee suppliers in India
  • Alloy 20 End Caps
  • Alloy 20 Piggable Bends manufacturer in Mumbai, Maharashtra
  • Alloy 20 LR Return Bend manufacturer in India
  • Alloy 20 Threaded Elbow
  • Alloy 20 Seamless Fittings manufacturer in India
  • Alloy 20 Welded Pipe Fittings suppliers in India
  • ASTM B366 Alloy 20 Straight Tees
  • ASTM B366 Alloy 20 Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Alloy 20 180° Long Radius Elbow suppliers in India
  • Alloy 20 Forged/Plate Cut Rings
  • Alloy 20 Fabricated Pipe Fittings exporters in India
  • Alloy 20 Swedge Nipple manufacturer in India
  • Alloy 20 Pipe Nipple manufacturer in India
  • Alloy 20 Long Stubend suppliers in India

Alloy 20 90° Elbow manufacturer in India

Alloy 20 90 degree pipe elbow manufacturerAlloy 20 90 degree pipe elbow suppliers, Alloy 20 Elbows

Alloy 20 90 degree elbow is a type of Alloy 20 Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Alloy 20 90 Bend” or “Carpenter 20 Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Alloy 20 90° Elbows are made of Alloy 20 seamless tubes within the diameter range of DN 15 – DN 1000.

Alloy 20 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Alloy 20 Elbows other trade name: Carpenter 20 Elbow, ASTM B366 UNS N08020 Elbow, Carpenter 20 Elbow, Alloy 20 Pipe Elbow, UNS N08020 Elbow

Alloy 20 Elbow 45° manufacturer in India

Alloy 20 45 Degree Elbows manufacturerAlloy 20 45 Degree Elbows suppliers

Alloy 20 45 degree elbow is the Alloy 20 elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Alloy 20 45° Elbows are made of Alloy 20 Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Alloy 20 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Alloy 20 butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Alloy 20 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Alloy 20 butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Alloy 20 180° Returns manufacturer in India

Alloy 20 180° Returns manufacturerAlloy 20 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Alloy 20 Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Alloy 20 long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Alloy 20 180° Long Radius Return
  • ASTM B366 Alloy 20 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Reducing Tee manufacturer in India, Alloy 20 Reducing Pipe Tee manufacturer

Alloy 20 Reducing Tee manufacturerAlloy 20 Reducing Tee suppliers, Alloy 20 Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Alloy 20 straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Alloy 20 reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Alloy 20 Stright Tee
  • ASTM B366 Alloy 20 Reducing Tee

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Tee manufacturer in India, Alloy 20 Equal Tee Manufacturer

Alloy 20 Tee manufacturerAlloy 20 Pipe Tee suppliers

Our Alloy 20 butt weld pipe tees include Alloy 20 butt weld straight tees and Alloy 20 butt weld reducing tees. Alloy 20 tees are available within the range of DN 15 – DN 600. Our Alloy 20 butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Alloy 20 straight pipe tee. Alloy 20 Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Alloy 20 Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Alloy 20 reducing tee can connect various sizes of pipes together in one pipe system.

Alloy 20 Concentric Reducers manufacturer in India, Alloy 20 Reducer Manufacturer

Alloy 20 Concentric Reducers manufacturerAlloy 20 Pipe Reducer/ Reducers suppliers

Looking for Alloy 20 Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Alloy 20 pipe reducer: Alloy 20 concentric reducer and Alloy 20 eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Alloy 20 reducers are made of Alloy 20 seamless tube within the range of DN 15 – DN 1000.

Alloy 20 butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Alloy 20 eccentric butt welding reducer is a type of Alloy 20 pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Alloy 20 concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Alloy 20 eccentric reducers have a parallel edge, which results in an offsetting center. Alloy 20 Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Eccentric Reducers manufacturer in India

Alloy 20 Eccentric Reducers manufacturerAlloy 20 Eccentric Pipe Reducer/ Reducers suppliers

Looking for Alloy 20 Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

 

 

Alloy 20 Long Radius LR Elbows manufacturer in India, Alloy 20 LR Elbows manufacturer

Alloy 20 LR Elbows manufacturerAlloy 20 Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Alloy 20 long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Alloy 20 Short radius elbows have a center-to-end measurement equl to pipe diameter.

Alloy 20 long radius elbow costs less than a short radius fittings. Alloy 20 Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Alloy 20 45° Long Radius Elbow
  • ASTM B366 Alloy 20 90° Long Radius Elbow
  • ASTM B366 Alloy 20 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Short Radius SR Elbows manufacturer in India, Alloy 20 SR Elbows manufacturer

Alloy 20 Short Radius Elbows manufacturerAlloy 20 Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Alloy 20 short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Alloy 20 short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Alloy 20 45° Short Radius Elbow
  • ASTM B366 Alloy 20 90° Short Radius Elbow
  • ASTM B366 Alloy 20 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Pipe Cap Supplier, Alloy 20 End Cap manufacturer

Alloy 20 Pipe Cap manufacturerAlloy 20 Pipe Cap/ End Cap suppliers

Alloy 20 Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Alloy 20 butt weld caps come in various sizes and schedules to fit your Alloy 20 pipe and fitting needs.

Alloy 20 butt weld cap is a type of Alloy 20 Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Alloy 20 End Caps: cap, Seamless cap, Steel cap, Alloy 20 Seamless cap, pipe cap, cap end

  • ASTM B366 Alloy 20 Seamless cap
  • ASTM B366 Alloy 20 Erw cap
  • ASTM B366 Alloy 20 Large size cap
  • ASTM B366 Alloy 20 Small size cap

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Stub End manufacturer in India, Alloy 20 Stub Ends manufacturer

Alloy 20 Stub End manufacturers in IndiaAlloy 20 Stub End suppliers

These Alloy 20 Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Alloy 20 stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Alloy 20 Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Alloy 20 Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Alloy 20 Cross manufacturer in India, Alloy 20 Pipe Cross manufacturer

Alloy 20 Cross manufacturers in IndiaAlloy 20 Pipe Cross suppliers

We can supply Alloy 20 pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Alloy 20 cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Alloy 20 Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Alloy 20 Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Alloy 20 UNS N08020

Hot Offer on Alloy 20 Pipe Fittings in 2017-18

We are have a wide size range of Alloy 20 Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Alloy 20 Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Alloy 20 Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Alloy 20 Pipe Fittings buyers

Alloy 20 Pipe Fittings Chemical Composition

ASTM B366 Alloy 20 Buttweld Fittings Chemical Properties

Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3.00 – 4.00 32.00 – 38.00 19.00 – 21.00 29.85 min* 2.00 – 3.00 0.045 max

Alloy 20 Pipe Fittings Mechanical Properties

ASTM B366 Mechanical & Physical Properties of Alloy 20 Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Alloy 20 8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi – 35,000, MPa – 241 30 %

Alloy 20 Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
FCC REVAMP PROJECT, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
TAR 2013, NETHERLANDS Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling
PROGETTO MAM, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
SURINAME PROJECT, SURINAME Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
TAR 2012, NETHERLANDS Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
LIBONDO PROJECT, CONGO Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
PROGRAM 10+, POLAND Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Alloy 20 Pipe fittings in form of Alloy 20 Long Radius Elbow, Alloy 20 Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Alloy 20 Pipe fittings in form of ASTM B366 Alloy 20 Long Radius Return Bend, ASTM B366 Alloy 20 Short Radius Return Bend, ASTM B366 Alloy 20 Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Alloy 20 Pipe fittings in form of Alloy 20 End Cap, Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
MORON AMMONIA, VENEZUELA Alloy 20 Pipe fittings in form of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Pipe Cross, Alloy 20 Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Alloy 20 Pipe fittings in form of Alloy 20 Cross, Alloy 20 Concentric Reducer
ARO KUWAIT EPC, KUWAIT Alloy 20 Pipe fittings in form of Alloy 20 Eccentric Reducer, Alloy 20 pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Alloy 20 Pipe fittings in form of Alloy 20 Pipe Coupling, Alloy 20 Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Alloy 20 Buttweld fittings in form of Alloy 20 End Cap, Alloy 20 Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Stub Ends, Alloy 20 Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Alloy 20 Buttweld fittings, UNS N08020 Buttweld Fittings in form of Alloy 20 Buttweld fittings in forms of Alloy 20 Equal Tee, Alloy 20 Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Concentric Reducer, Alloy 20 Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Alloy 20 Buttweld fittings, UNS N08020 Pipe Fittings in form of Alloy 20 Collar, Alloy 20 Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Alloy 20 Buttweld fittings in form of Alloy 20 Short Radius Elbow, Alloy 20 Return Bend, Elbow, Alloy 20 Coupling

 

Alloy 20 Pipe Fittings Ready Stock

Products Size
Alloy 20 Elbows Long Radius Alloy 20 Stub Ends

Sizes 1/2″-48″

Alloy 20 Elbows Short Radius Alloy 20 Crosses
Alloy 20 Reducing Elbows Alloy 20 Reducing Crosses
Alloy 20 45° Elbows Alloy 20 180° LR Return Bends
Alloy 20 Tees Alloy 20 180° SR Return Bends
Alloy 20 Tees Alloy 20 Pipe Bends / Piggable Bends
Alloy 20 Reducers Alloy 20 Couplings
Alloy 20 Concentric Reducers Alloy 20 Pipe Nipples
Alloy 20 Eccentric Reducers Alloy 20 Forged/Plate Cut Rings
Alloy 20 3D Elbow Alloy 20 End Caps
Alloy 20 5D Elbow Alloy 20 Forged / Plate Circles


 

Alloy 20 Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Alloy 20 Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Alloy 20 Pipe Fittings dimensions, Alloy 20 Pipe Fittings dimension chart

Weights of Alloy 20 Buttweld Elbows

ALLOY 20 ELBOWS 90° LONG RADIUS SCHEDULE STD

NPS LBS KG
1/2 0.18 0.08
3/4 0.19 0.09
1 0.4 0.18
0.6 0.27
0.9 0.41
2 1.6 0.73
3.25 1.47
3 5 2.27
6.75 3.06
4 9 4.08
5 15 6.8
6 24.5 11.11
8 50 22.68
10 88 39.92
12 125 56.7
14 160 72.57
16 206 93.44
18 260 117.93
20 320 145.15
22 394 178.72
24 460 208.65
26 550 249.48
30 734 332.94
36 1062 481.72
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Alloy 20 Fittings, Alloy 20 Pipe Fittings supplier in India, Alloy 20 Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Alloy 20 Pipe Fittings, Trader of Alloy 20 Buttweld Fittings in India, Distributor of Alloy 20 Butt Weld Fittings Dubai, Stockist of Alloy 20 Buttweld Pipe Fittings, Alloy 20 Elbows exporters in India, UNS N08020 Buttweld Fittings, Carpenter 20 Pipe Fittings traders in India, UNS N08020 Elbow suppliers in India, Alloy 20 Cap, Pipe Fittings available in Alloy 20 Material, Alloy 20 Weld Fittings Stock, Source for ASME SB 366 Alloy 20 Pipe Fittings, Alloy 20 Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Alloy 20.