Hastelloy Pipe Fittings Supplier

Hastelloy Buttweld Fittings distributorHastelloy Pipe Fittings supplier, Hastelloy Weld Fittings stock, Hastelloy Buttweld Fittings distributor in India, Hastelloy Pipe Fittings exporter, Hastelloy Elbow, Hastelloy Tee, Hastelloy Reducer

ASTM B366 Hastelloy Pipe Fittings, B366 Hastelloy Alloy Fittings supplier, Hastelloy Buttweld Pipe Fittings dealers, Hastelloy Stub End

ASME SB 366 Hastelloy Pipe Fittings supplier, B366 Buttweld Pipe Fittings supplier in India, Pipe Fittings, Hastelloy Alloy Weld Fittings suppliers in India, Hastelloy Alloy Fittings exporters in India, European Alloy Pipe Fitting, Hastelloy Butt Weld Pipe Fittings supplier

Buy from Hastelloy Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Hastelloy Butt weld Pipe Fittings. Offer Best Price for Hastelloy Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Hastelloy Reducer, ASTM B366 Hastelloy Buttweld Fittings in Mumbai, India, Alloy Buttweld Fitting traders in India, Hastelloy Elbow Dealer in India. Supplier of Hastelloy Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Hastelloy Butt weld Pipe Fitting, Hastelloy ASTM B366 Fittings stockholder in India, ASME SB366M Hastelloy Stub End wholesaler in India, manufacturer of Hastelloy Welded Fittings, B366 Hastelloy Commercial Pipe Fittings manufacturer, Hastelloy Alloy Seamless Pipe Fittings Traders in India, Stockholder of Hastelloy DIN 2.4856 Tee, Hastelloy Industrial Pipe Fittings, Hastelloy Pipe Elbow, Hastelloy Cap, Hastelloy Pipe Bends manufacturer in Rajkot, Gujarat, Hastelloy Tube Fittings Manufacturer

Contact Hastelloy Buttweld Fittings distributor, Hastelloy Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 Hastelloy Pipe Fittings Price in India

Export Price List of ASTM B366 | ASTM B366 Hastelloy Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Hastelloy Butt Weld Elbow

ASTM B366 Hastelloy BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
Hastelloy PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Hastelloy PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

Hastelloy Pipe Fittings are a nickel-molybdenum alloy. There are many different grades of Hastelloy Buttweld Fittings, many of which are nickel-chromium-molybdenum alloys. Each of these grades has been optimized for a specific purpose, but all of them are highly resistant to corrosion. The inclusion of molybdenum makes Hastelloy Buttweld Pipe Fittings harder, stronger at high temperatures, and also makes it great for welding applications. These Hastelloy Butt Weld Fittings are easily fabricated and formed. They have good ductility and can be forged and cold worked. Hastelloy Pipe Fitting has outstanding resistance to highly oxidizing and reducing agents, making it a great choice for moderate to severe corrosive environments.

These Hastelloy Pipe Fittings are available in a various forms such as Hastelloy End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Hastelloy Pipe Fittings, Hastelloy weld fittings, Hastelloy Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Hastelloy material. All Hastelloy elbows are mandrel formed to insure consistency. All our Hastelloy Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C276 2.4819 N10276 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W
Hastelloy B2 2.4617 N10665

Get Free Quote

Hastelloy Pipe Fittings supplier, Hastelloy Buttweld Fittings Supplier

Hastelloy Pipe Fittings supplier, Hastelloy Buttweld Fittings Supplier (Original Factory Photo)

Hastelloy 24" Long Radius Elbow | Hastelloy 24" Equal Tee SCH XXS | Hastelloy 10" SCH 160 Short Radius Bends | Hastelloy 24" Concentric Reducer SCH 80S | Hastelloy Unequal Tee 16" x 12" SCH 160 | Hastelloy Seamless Pipe Fittings | Hastelloy 100% X-Ray Welded Pipe Fittings | Hastelloy ANSI B16.9 Fittings | Seamless Reducing Tee, Hastelloy

Types of Hastelloy Buttweld Fittings

Hastelloy Pipe Fittings Specifications

Hastelloy Pipe Fittings are stocked in the following range of materials and sizes

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Hastelloy Seamless Butt Weld Fittings: 1/2″ – 10″
Hastelloy Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Hastelloy Pipe Fittings in form of :
  • ASTM B366 Hastelloy Equal Tee manufacturer
  • ASTM B366 Hastelloy Nipple manufacturer in Mumbai
  • ASTM B366 Hastelloy Long Radius Elbow manufacturer India
  • ASTM B366 Hastelloy Reducing Tee manufacturer Maharashtra
  • ASTM B366 Hastelloy Elbows manufacturer in Mumbai
  • ASTM B366 Hastelloy Swage Nipple manufacturer in India
  • ASTM B366 Hastelloy Short Radius Elbow suppliers in India
  • ASTM B366 Hastelloy Reducer manufacturer in India
  • Exporter of ASTM B366 Hastelloy Pipe Cap in India
  • ASTM B366 Hastelloy Barrel Nipple manufacturer in India
  • ASTM B366 Hastelloy 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Hastelloy Concentric Reducer manufacturer in India
  • ASTM B366 Hastelloy Reducing Nipple suppliers in Mumbai
  • ASTM B366 Hastelloy 45 Deg Elbows manufacturer in India
  • ASTM B366 Hastelloy Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Hastelloy Saddles manufacturer in India
  • ASTM B366 Hastelloy Weld Rings suppliers in Mumbai
  • ASTM B366 Hastelloy 180 Deg Elbow wholesaler in India
  • ASTM B366 Hastelloy End Cap importers in India
  • ASTM B366 Hastelloy 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Hastelloy 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Hastelloy Stubend manufacturer in India
  • Manufacturer of ASTM B366 Hastelloy 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Hastelloy Piggable Bend manufacturer in India
  • Trader of ASTM B366 Hastelloy Long Stubend manufacturer in India
  • Stockist of ASTM B366 Hastelloy Tee manufacturer in India
  • Stockholder of ASTM B366 Hastelloy Short Stubend Suppliers in India
  • ASTM B366 Hastelloy Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Hastelloy Bend manufacturer in Mumbai, India
  • ASTM B366 Hastelloy Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Hastelloy Weldolets manufacturer in Mumbai, India
  • ASTM B366 Hastelloy Return Bends manufacturer in Mumbai
  • ASTM B366 Hastelloy Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Hastelloy Long Bend with Radius – R = 3D, 5D & 10D
Hastelloy Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Hastelloy Long radius Bend, Hastelloy Piggable Bend, Hastelloy Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Hastelloy Pipe Fittings manufacturer in India
SABIC Approved Hastelloy Pipe Fittings supplier in India

Hastelloy Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Hastelloy B/W Fittings Manufacturer in India, ANSI B16.11 Hastelloy Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Hastelloy Pipe Fittings Make, Exporters & Stockist for

Top Hastelloy Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Hastelloy Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Hastelloy Pipe Fittings

  • ASTM B366 Hastelloy Equal Cross manufacturer in India
  • Hastelloy Reducing Cross manufacturer
  • Hastelloy 90°/180°/45° Long Radius Elbow manufacturer
  • Hastelloy 90°/180°/45° Short Radius Elbow manufacturer
  • Hastelloy End Cap manufacturer in India
  • Hastelloy Pipe Cap manufacturer
  • Hastelloy Lap Joint Stub Ends manufacturer
  • Hastelloy Reducing Tee manufacturer in India
  • ASTM B366 Hastelloy Collar suppliers in India
  • Hastelloy Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Hastelloy Piggable Bend suppliers in India
  • Hastelloy 45° Long Radius Elbow
  • Hastelloy 45° Short Radius Elbow manufacturer in India
  • Hastelloy 180° Short Radius Elbow
  • Hastelloy Pipe Bends suppliers in India
  • Hastelloy Reducing Elbow manufacturer in India
  • Hastelloy Cross Fitting manufacturer in Mumbai, Maharashtra
  • Hastelloy Reducing Cross Fitting suppliers in India
  • Hastelloy SR Return Bend manufacturer in India
  • Hastelloy Seamless Reducing Tee
  • Hastelloy Couplings suppliers in India
  • Hastelloy Forged Pipe Reducer
  • Hastelloy Reducing Nipple manufacturer in India
  • ASTM B366 Hastelloy Short Stubend manufacturer in Mumbai, Maharashtra
  • Hastelloy 1.5D Elbow suppliers in India
  • ASTM B366 Hastelloy Outlet Tees and Crosses manufacturer in India
  • Hastelloy Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Hastelloy Eccentric Reducer
  • ASTM B366 Hastelloy Reducer manufacturer in India
  • ASTM B366 Hastelloy 1D Elbow
  • Hastelloy 3D Elbow
  • Hastelloy 5D Elbow manufacturer in India
  • ASTM B366 Hastelloy Lateral Tee suppliers in India
  • Hastelloy End Caps
  • Hastelloy Piggable Bends manufacturer in Mumbai, Maharashtra
  • Hastelloy LR Return Bend manufacturer in India
  • Hastelloy Threaded Elbow
  • Hastelloy Seamless Fittings manufacturer in India
  • Hastelloy Welded Pipe Fittings suppliers in India
  • ASTM B366 Hastelloy Straight Tees
  • ASTM B366 Hastelloy Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Hastelloy 180° Long Radius Elbow suppliers in India
  • Hastelloy Forged/Plate Cut Rings
  • Hastelloy Fabricated Pipe Fittings exporters in India
  • Hastelloy Swedge Nipple manufacturer in India
  • Hastelloy Pipe Nipple manufacturer in India
  • Hastelloy Long Stubend suppliers in India

Hastelloy 90° Elbow manufacturer in India

Hastelloy 90 degree pipe elbow manufacturerHastelloy 90 degree pipe elbow suppliers, Hastelloy Elbows

Hastelloy 90 degree elbow is a type of Hastelloy Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Hastelloy 90 Bend” or “Hastelloy Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Hastelloy 90° Elbows are made of Hastelloy seamless tubes within the diameter range of DN 15 – DN 1000.

Hastelloy 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Hastelloy Elbows other trade name: Hastelloy Alloy Elbow, ASTM B366 Elbow, Hastelloy Elbow, Hastelloy Pipe Elbow, Elbow

Hastelloy Elbow 45° manufacturer in India

Hastelloy 45 Degree Elbows manufacturerHastelloy 45 Degree Elbows suppliers

Hastelloy 45 degree elbow is the Hastelloy elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Hastelloy 45° Elbows are made of Hastelloy Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Hastelloy 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Hastelloy butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Hastelloy 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Hastelloy butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Hastelloy 180° Returns manufacturer in India

Hastelloy 180° Returns manufacturerHastelloy 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Hastelloy Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Hastelloy long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Hastelloy 180° Long Radius Return
  • ASTM B366 Hastelloy 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Reducing Tee manufacturer in India, Hastelloy Reducing Pipe Tee manufacturer

Hastelloy Reducing Tee manufacturerHastelloy Reducing Tee suppliers, Hastelloy Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Hastelloy straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Hastelloy reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Hastelloy Stright Tee
  • ASTM B366 Hastelloy Reducing Tee

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Tee manufacturer in India, Hastelloy Equal Tee Manufacturer

Hastelloy Tee manufacturerHastelloy Pipe Tee suppliers

Our Hastelloy butt weld pipe tees include Hastelloy butt weld straight tees and Hastelloy butt weld reducing tees. Hastelloy tees are available within the range of DN 15 – DN 600. Our Hastelloy butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Hastelloy straight pipe tee. Hastelloy Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Hastelloy Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Hastelloy reducing tee can connect various sizes of pipes together in one pipe system.

Hastelloy Concentric Reducers manufacturer in India, Hastelloy Reducer Manufacturer

Hastelloy Concentric Reducers manufacturerHastelloy Pipe Reducer/ Reducers suppliers

Looking for Hastelloy Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Hastelloy pipe reducer: Hastelloy concentric reducer and Hastelloy eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Hastelloy reducers are made of Hastelloy seamless tube within the range of DN 15 – DN 1000.

Hastelloy butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Hastelloy eccentric butt welding reducer is a type of Hastelloy pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Hastelloy concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Hastelloy eccentric reducers have a parallel edge, which results in an offsetting center. Hastelloy Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Eccentric Reducers manufacturer in India

Hastelloy Eccentric Reducers manufacturerHastelloy Eccentric Pipe Reducer/ Reducers suppliers

Looking for Hastelloy Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Hastelloy

 

 

Hastelloy Long Radius LR Elbows manufacturer in India, Hastelloy LR Elbows manufacturer

Hastelloy LR Elbows manufacturerHastelloy Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Hastelloy long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Hastelloy Short radius elbows have a center-to-end measurement equl to pipe diameter.

Hastelloy long radius elbow costs less than a short radius fittings. Hastelloy Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Hastelloy 45° Long Radius Elbow
  • ASTM B366 Hastelloy 90° Long Radius Elbow
  • ASTM B366 Hastelloy 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Short Radius SR Elbows manufacturer in India, Hastelloy SR Elbows manufacturer

Hastelloy Short Radius Elbows manufacturerHastelloy Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Hastelloy short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Hastelloy short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Hastelloy 45° Short Radius Elbow
  • ASTM B366 Hastelloy 90° Short Radius Elbow
  • ASTM B366 Hastelloy 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Pipe Cap Supplier, Hastelloy End Cap manufacturer

Hastelloy Pipe Cap manufacturerHastelloy Pipe Cap/ End Cap suppliers

Hastelloy Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Hastelloy butt weld caps come in various sizes and schedules to fit your Hastelloy pipe and fitting needs.

Hastelloy butt weld cap is a type of Hastelloy Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Hastelloy End Caps: cap, Seamless cap, Steel cap, Hastelloy Seamless cap, pipe cap, cap end

  • ASTM B366 Hastelloy Seamless cap
  • ASTM B366 Hastelloy Erw cap
  • ASTM B366 Hastelloy Large size cap
  • ASTM B366 Hastelloy Small size cap

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Stub End manufacturer in India, Hastelloy Stub Ends manufacturer

Hastelloy Stub End manufacturers in IndiaHastelloy Stub End suppliers

These Hastelloy Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Hastelloy stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Hastelloy Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Hastelloy Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Hastelloy

Hastelloy Cross manufacturer in India, Hastelloy Pipe Cross manufacturer

Hastelloy Cross manufacturers in IndiaHastelloy Pipe Cross suppliers

We can supply Hastelloy pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Hastelloy cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Hastelloy Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Hastelloy Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Hastelloy

Hot Offer on Hastelloy Pipe Fittings in 2017-18

We are have a wide size range of Hastelloy Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Hastelloy Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Hastelloy Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Hastelloy Pipe Fittings buyers

Hastelloy Pipe Fittings Chemical Composition

ASTM B366 Hastelloy Buttweld Fittings Chemical Properties

Grade C Mn Si S Co Ni Cr Fe Mo P
C276 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max
B2 0.02 max 1.0 max 0.1 max 0.03 max 1.0 max Bal 1.0 max 2.0 max 26 – 30 0.04 max

Hastelloy Pipe Fittings Mechanical Properties

ASTM B366 Mechanical & Physical Properties of Hastelloy Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C276 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %
Hastelloy B2 9.2 g/cm3 1370 °C (2500 ºF ) Psi – 1,10,000 , MPa – 760 Psi – 51000 , MPa – 350 40 %

Hastelloy Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
FCC REVAMP PROJECT, ITALY Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
TAR 2013, NETHERLANDS Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling
PROGETTO MAM, ITALY Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
SURINAME PROJECT, SURINAME Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
TAR 2012, NETHERLANDS Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
LIBONDO PROJECT, CONGO Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
PROGRAM 10+, POLAND Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Hastelloy Pipe fittings in form of Hastelloy Long Radius Elbow, Hastelloy Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Hastelloy Pipe fittings in form of ASTM B366 Hastelloy Long Radius Return Bend, ASTM B366 Hastelloy Short Radius Return Bend, ASTM B366 Hastelloy Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Hastelloy Pipe fittings in form of Hastelloy End Cap, Hastelloy Stub Ends, Hastelloy Pipe Nipple
MORON AMMONIA, VENEZUELA Hastelloy Pipe fittings in form of Hastelloy Equal Tee, Hastelloy Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Hastelloy Pipe fittings in form of Hastelloy Pipe Cross, Hastelloy Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Hastelloy Pipe fittings in form of Hastelloy Cross, Hastelloy Concentric Reducer
ARO KUWAIT EPC, KUWAIT Hastelloy Pipe fittings in form of Hastelloy Eccentric Reducer, Hastelloy pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Hastelloy Pipe fittings in form of Hastelloy Pipe Coupling, Hastelloy Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Hastelloy Buttweld fittings in form of Hastelloy End Cap, Hastelloy Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Hastelloy Buttweld fittings in form of Hastelloy Stub Ends, Hastelloy Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Hastelloy Buttweld fittings, Buttweld Fittings in form of Hastelloy Buttweld fittings in forms of Hastelloy Equal Tee, Hastelloy Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Hastelloy Buttweld fittings in form of Hastelloy Concentric Reducer, Hastelloy Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Hastelloy Buttweld fittings, Pipe Fittings in form of Hastelloy Collar, Hastelloy Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Hastelloy Buttweld fittings in form of Hastelloy Short Radius Elbow, Hastelloy Return Bend, Elbow, Hastelloy Coupling

 

Hastelloy Pipe Fittings Ready Stock

Products Size
Hastelloy Elbows Long Radius Hastelloy Stub Ends

Sizes 1/2″-48″

Hastelloy Elbows Short Radius Hastelloy Crosses
Hastelloy Reducing Elbows Hastelloy Reducing Crosses
Hastelloy 45° Elbows Hastelloy 180° LR Return Bends
Hastelloy Tees Hastelloy 180° SR Return Bends
Hastelloy Tees Hastelloy Pipe Bends / Piggable Bends
Hastelloy Reducers Hastelloy Couplings
Hastelloy Concentric Reducers Hastelloy Pipe Nipples
Hastelloy Eccentric Reducers Hastelloy Forged/Plate Cut Rings
Hastelloy 3D Elbow Hastelloy End Caps
Hastelloy 5D Elbow Hastelloy Forged / Plate Circles


 

Hastelloy Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Hastelloy Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Hastelloy Pipe Fittings dimensions, Hastelloy Pipe Fittings dimension chart

HASTELLOY ELBOWS 180° RETURN LONG RADIUS SCHEDULE XS

NPS LBS KG
3/4 0.65 0.29
1 1 0.45
1.75 0.79
2.39 1.08
2 4.4 2
8 3.63
3 13 5.9
16.75 7.6
4 25 11.34
5 44 19.96
6 70 31.75
8 142 64.41
10 215 97.52
12 320 145.15
14 400 181.44
16 550 249.48
18 690 312.98
20 830 376.48
22 1040 471.74
24 1200 544.31
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Hastelloy Fittings, Hastelloy Pipe Fittings supplier in India, Hastelloy Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Hastelloy Pipe Fittings, Trader of Hastelloy Buttweld Fittings in India, Distributor of Hastelloy Butt Weld Fittings Dubai, Stockist of Hastelloy Buttweld Pipe Fittings, Hastelloy Elbows exporters in India, Buttweld Fittings, Hastelloy Pipe Fittings traders in India, Elbow suppliers in India, Hastelloy Cap, Pipe Fittings available in Hastelloy Material, Hastelloy Weld Fittings Stock, Source for ASME SB 366 Hastelloy Pipe Fittings, Hastelloy Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Hastelloy.