ASTM B366 UNS N08810 Incoloy 800H Pipe Fittings supplier

Incoloy 800H Buttweld Fittings distributorIncoloy 800H Pipe Fittings supplier, Incoloy 800H Weld Fittings stock, Inconel 800H Buttweld Fittings distributor in India, Incoloy 800H Pipe Fittings exporter, Incoloy 800H Elbow, Incoloy 800H Tee, Incoloy 800H Reducer

ASTM B366 UNS N08810, B366 UNS N08810, Alloy 800H Pipe Fittings supplier, Incoloy 800H Buttweld Pipe Fittings dealers, Incoloy 800H Stub End

ASME SB 366 Incoloy 800H Pipe Fittings supplier, B366 UNS N08810 Buttweld Pipe Fittings supplier in India, UNS N08810 Pipe Fittings, Alloy 800H Weld Fittings suppliers in India, Inconel Alloy 800H Fittings exporters in India, European Alloy 800H Pipe Fitting, Incoloy 800H Butt Weld Pipe Fittings supplier

Buy from 800H Incoloy Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Incoloy 800H Butt weld Pipe Fittings. Offer Best Price for Incoloy UNS N08810 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Incoloy 800H Reducer, ASTM B366 800H Inconel Buttweld Fittings in Mumbai, India, 800H Alloy Buttweld Fitting traders in India, Incoloy 800H Elbow Dealer in India. Supplier of Incoloy 800H Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Incoloy 800H Butt weld Pipe Fitting, Incoloy ASTM B366 800H Fittings stockholder in India, ASME SB366M Incoloy 800H Stub End wholesaler in India, manufacturer of Incoloy UNS N08810 Welded Fittings, B366 Incoloy 800H Commercial Pipe Fittings manufacturer, Incoloy Alloy 800H Seamless Pipe Fittings Traders in India, Stockholder of Incoloy DIN 2.4856 Tee, Incoloy 800H Industrial Pipe Fittings, Incoloy 800H Pipe Elbow, Incoloy 800H Cap, Incoloy 800H Pipe Bends manufacturer in Rajkot, Gujarat, Incoloy 800H Tube Fittings Manufacturer

Contact Incoloy 800H Buttweld Fittings distributor, Incoloy 800H Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N08810 Incoloy 800H Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N08810| ASTM B366 Incoloy 800H Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Incoloy 800H Butt Weld Elbow

ASTM B366 Incoloy 800H BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
UNS N08810 Incoloy 800H PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Incoloy 800H PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

Incoloy 800H Pipe Fittings are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These Incoloy 800H Butt Weld Fittings are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 Pipe Fittings was the first of these alloys and it was slightly modified into Incoloy 800H Buttweld Fittings.

Incoloy 800H Buttweld Pipe Fittings is commonly welded using RA82 (ERNiCr-3) Pipe Fittings for applications under 1450°F. RA330-04 (N08334) Pipe Fittings offers a closer match of thermal expansion coefficient, and somewhat higher strength. To avoid possible stress relaxation grain boundary cracking of UNS N08810 Pipe Fittings in applications above 1000°F the welded fabrication may be heated 1650°F for about one hour per inch of thickness or 30 minutes minimum then air cooled.

These UNS N08810 Pipe Fittings are available in a various forms such as Incoloy Alloy 800H End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Incoloy 800H Pipe Fittings, Incoloy 800H weld fittings, Incoloy 800H Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Incoloy 800H material. All Incoloy 800H elbows are mandrel formed to insure consistency. All our Incoloy 800H Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Incoloy 800H Pipe Fittings Trade Name

Trade Name
UNS #
Nickel Alloy Butweld Fittings
Incoloy® 800H
N08810
B/SB366 Grade WPNIC10

Get Free Quote

Incoloy 800H Pipe Fittings supplier, Incoloy 800H Buttweld Fittings Supplier

Incoloy 800H Pipe Fittings supplier, Incoloy 800H Buttweld Fittings Supplier (Original Factory Photo)

Incoloy 800H 24" Long Radius Elbow | Incoloy 800H 24" Equal Tee SCH XXS | Incoloy 800H 10" SCH 160 Short Radius Bends | Incoloy 800H 24" Concentric Reducer SCH 80S | Incoloy 800H Unequal Tee 16" x 12" SCH 160 | Incoloy 800H Seamless Pipe Fittings | Incoloy 800H 100% X-Ray Welded Pipe Fittings | Incoloy 800H ANSI B16.9 Fittings | Seamless Reducing Tee, Incoloy 800H

Types of Incoloy 800H Buttweld Fittings

Incoloy 800H Pipe Fittings Specifications

Incoloy 800H Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N08810
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Incoloy 800H Seamless Butt Weld Fittings: 1/2″ – 10″
Incoloy 800H Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Incoloy 800H Pipe Fittings in form of :
  • ASTM B366 Incoloy 800H Equal Tee manufacturer
  • ASTM B366 Incoloy 800H Nipple manufacturer in Mumbai
  • ASTM B366 Incoloy 800H Long Radius Elbow manufacturer India
  • ASTM B366 Incoloy 800H Reducing Tee manufacturer Maharashtra
  • ASTM B366 Incoloy 800H Elbows manufacturer in Mumbai
  • ASTM B366 Incoloy 800H Swage Nipple manufacturer in India
  • ASTM B366 Incoloy 800H Short Radius Elbow suppliers in India
  • ASTM B366 Incoloy 800H Reducer manufacturer in India
  • Exporter of ASTM B366 Incoloy 800H Pipe Cap in India
  • ASTM B366 Incoloy 800H Barrel Nipple manufacturer in India
  • ASTM B366 Incoloy 800H 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Incoloy 800H Concentric Reducer manufacturer in India
  • ASTM B366 Incoloy 800H Reducing Nipple suppliers in Mumbai
  • ASTM B366 Incoloy 800H 45 Deg Elbows manufacturer in India
  • ASTM B366 Incoloy 800H Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Incoloy 800H Saddles manufacturer in India
  • ASTM B366 Incoloy 800H Weld Rings suppliers in Mumbai
  • ASTM B366 Incoloy 800H 180 Deg Elbow wholesaler in India
  • ASTM B366 Incoloy 800H End Cap importers in India
  • ASTM B366 Incoloy 800H 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800H 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Incoloy 800H Stubend manufacturer in India
  • Manufacturer of ASTM B366 Incoloy 800H 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Incoloy 800H Piggable Bend manufacturer in India
  • Trader of ASTM B366 Incoloy 800H Long Stubend manufacturer in India
  • Stockist of ASTM B366 Incoloy 800H Tee manufacturer in India
  • Stockholder of ASTM B366 Incoloy 800H Short Stubend Suppliers in India
  • ASTM B366 Incoloy 800H Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800H Bend manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800H Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800H Weldolets manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800H Return Bends manufacturer in Mumbai
  • ASTM B366 Incoloy 800H Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Incoloy 800H Long Bend with Radius – R = 3D, 5D & 10D
Incoloy 800H Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Incoloy 800H Long radius Bend, Incoloy 800H Piggable Bend, Incoloy 800H Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Incoloy 800H Pipe Fittings manufacturer in India
SABIC Approved Incoloy 800H Pipe Fittings supplier in India

Incoloy 800H Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Incoloy 800H B/W Fittings Manufacturer in India, ANSI B16.11 Incoloy 800H Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Incoloy 800H Pipe Fittings Make, Exporters & Stockist for

Top Incoloy 800H Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Incoloy 800H Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Incoloy 800H Pipe Fittings

  • ASTM B366 Incoloy 800H Equal Cross manufacturer in India
  • Incoloy 800H Reducing Cross manufacturer
  • Incoloy 800H 90°/180°/45° Long Radius Elbow manufacturer
  • Incoloy 800H 90°/180°/45° Short Radius Elbow manufacturer
  • Incoloy 800H End Cap manufacturer in India
  • Incoloy 800H Pipe Cap manufacturer
  • Incoloy 800H Lap Joint Stub Ends manufacturer
  • Incoloy 800H Reducing Tee manufacturer in India
  • ASTM B366 Incoloy 800H Collar suppliers in India
  • Incoloy 800H Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800H Piggable Bend suppliers in India
  • Incoloy 800H 45° Long Radius Elbow
  • Incoloy 800H 45° Short Radius Elbow manufacturer in India
  • Incoloy 800H 180° Short Radius Elbow
  • Incoloy 800H Pipe Bends suppliers in India
  • Incoloy 800H Reducing Elbow manufacturer in India
  • Incoloy 800H Cross Fitting manufacturer in Mumbai, Maharashtra
  • Incoloy 800H Reducing Cross Fitting suppliers in India
  • Incoloy 800H SR Return Bend manufacturer in India
  • Incoloy 800H Seamless Reducing Tee
  • Incoloy 800H Couplings suppliers in India
  • Incoloy 800H Forged Pipe Reducer
  • Incoloy 800H Reducing Nipple manufacturer in India
  • ASTM B366 Incoloy 800H Short Stubend manufacturer in Mumbai, Maharashtra
  • Incoloy 800H 1.5D Elbow suppliers in India
  • ASTM B366 Incoloy 800H Outlet Tees and Crosses manufacturer in India
  • Incoloy 800H Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Incoloy 800H Eccentric Reducer
  • ASTM B366 Incoloy 800H Reducer manufacturer in India
  • ASTM B366 Incoloy 800H 1D Elbow
  • Incoloy 800H 3D Elbow
  • Incoloy 800H 5D Elbow manufacturer in India
  • ASTM B366 Incoloy 800H Lateral Tee suppliers in India
  • Incoloy 800H End Caps
  • Incoloy 800H Piggable Bends manufacturer in Mumbai, Maharashtra
  • Incoloy 800H LR Return Bend manufacturer in India
  • Incoloy 800H Threaded Elbow
  • Incoloy 800H Seamless Fittings manufacturer in India
  • Incoloy 800H Welded Pipe Fittings suppliers in India
  • ASTM B366 Incoloy 800H Straight Tees
  • ASTM B366 Incoloy 800H Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Incoloy 800H 180° Long Radius Elbow suppliers in India
  • Incoloy 800H Forged/Plate Cut Rings
  • Incoloy 800H Fabricated Pipe Fittings exporters in India
  • Incoloy 800H Swedge Nipple manufacturer in India
  • Incoloy 800H Pipe Nipple manufacturer in India
  • Incoloy 800H Long Stubend suppliers in India

Incoloy 800H 90° Elbow manufacturer in India

Incoloy 800H 90 degree pipe elbow manufacturerIncoloy 800H 90 degree pipe elbow suppliers, Incoloy 800H Elbows

Incoloy 800H 90 degree elbow is a type of Incoloy 800H Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Incoloy 800H 90 Bend” or “Alloy 800H Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Incoloy 800H 90° Elbows are made of Incoloy 800H seamless tubes within the diameter range of DN 15 – DN 1000.

Incoloy 800H 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Incoloy 800H Elbows other trade name: Incoloy Alloy 800H Elbow, ASTM B366 UNS N08810 Elbow, Alloy 800H Elbow, Incoloy 800H Pipe Elbow, UNS N08810 Elbow

Incoloy 800H Elbow 45° manufacturer in India

Incoloy 800H 45 Degree Elbows manufacturerIncoloy 800H 45 Degree Elbows suppliers

Incoloy 800H 45 degree elbow is the Incoloy 800H elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Incoloy 800H 45° Elbows are made of Incoloy 800H Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Incoloy 800H 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Incoloy 800H butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Incoloy 800H 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Incoloy 800H butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Incoloy 800H 180° Returns manufacturer in India

Incoloy 800H 180° Returns manufacturerIncoloy 800H 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Incoloy 800H Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Incoloy 800H long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Incoloy 800H 180° Long Radius Return
  • ASTM B366 Incoloy 800H 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Reducing Tee manufacturer in India, Incoloy 800H Reducing Pipe Tee manufacturer

Incoloy 800H Reducing Tee manufacturerIncoloy 800H Reducing Tee suppliers, Incoloy 800H Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Incoloy 800H straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Incoloy 800H reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Incoloy 800H Stright Tee
  • ASTM B366 Incoloy 800H Reducing Tee

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Tee manufacturer in India, Incoloy 800H Equal Tee Manufacturer

Incoloy 800H Tee manufacturerIncoloy 800H Pipe Tee suppliers

Our Incoloy 800H butt weld pipe tees include Incoloy 800H butt weld straight tees and Incoloy 800H butt weld reducing tees. Incoloy 800H tees are available within the range of DN 15 – DN 600. Our Incoloy 800H butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Incoloy 800H straight pipe tee. Incoloy 800H Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Incoloy 800H Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Incoloy 800H reducing tee can connect various sizes of pipes together in one pipe system.

Incoloy 800H Concentric Reducers manufacturer in India, Incoloy 800H Reducer Manufacturer

Incoloy 800H Concentric Reducers manufacturerIncoloy 800H Pipe Reducer/ Reducers suppliers

Looking for Incoloy 800H Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Incoloy 800H pipe reducer: Incoloy 800H concentric reducer and Incoloy 800H eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Incoloy 800H reducers are made of Incoloy 800H seamless tube within the range of DN 15 – DN 1000.

Incoloy 800H butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Incoloy 800H eccentric butt welding reducer is a type of Incoloy 800H pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Incoloy 800H concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Incoloy 800H eccentric reducers have a parallel edge, which results in an offsetting center. Incoloy 800H Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Eccentric Reducers manufacturer in India

Incoloy 800H Eccentric Reducers manufacturerIncoloy 800H Eccentric Pipe Reducer/ Reducers suppliers

Looking for Incoloy 800H Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

 

 

Incoloy 800H Long Radius LR Elbows manufacturer in India, Incoloy 800H LR Elbows manufacturer

Incoloy 800H LR Elbows manufacturerIncoloy 800H Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Incoloy 800H long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Incoloy 800H Short radius elbows have a center-to-end measurement equl to pipe diameter.

Incoloy 800H long radius elbow costs less than a short radius fittings. Incoloy 800H Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Incoloy 800H 45° Long Radius Elbow
  • ASTM B366 Incoloy 800H 90° Long Radius Elbow
  • ASTM B366 Incoloy 800H 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Short Radius SR Elbows manufacturer in India, Incoloy 800H SR Elbows manufacturer

Incoloy 800H Short Radius Elbows manufacturerIncoloy 800H Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Incoloy 800H short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Incoloy 800H short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Incoloy 800H 45° Short Radius Elbow
  • ASTM B366 Incoloy 800H 90° Short Radius Elbow
  • ASTM B366 Incoloy 800H 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Pipe Cap Supplier, Incoloy 800H End Cap manufacturer

Incoloy 800H Pipe Cap manufacturerIncoloy 800H Pipe Cap/ End Cap suppliers

Incoloy 800H Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Incoloy 800H butt weld caps come in various sizes and schedules to fit your Incoloy 800H pipe and fitting needs.

Incoloy 800H butt weld cap is a type of Incoloy 800H Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Incoloy 800H End Caps: cap, Seamless cap, Steel cap, Incoloy 800H Seamless cap, pipe cap, cap end

  • ASTM B366 Incoloy 800H Seamless cap
  • ASTM B366 Incoloy 800H Erw cap
  • ASTM B366 Incoloy 800H Large size cap
  • ASTM B366 Incoloy 800H Small size cap

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Stub End manufacturer in India, Incoloy 800H Stub Ends manufacturer

Incoloy 800H Stub End manufacturers in IndiaIncoloy 800H Stub End suppliers

These Incoloy 800H Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Incoloy 800H stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Incoloy 800H Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Incoloy 800H Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Incoloy 800H Cross manufacturer in India, Incoloy 800H Pipe Cross manufacturer

Incoloy 800H Cross manufacturers in IndiaIncoloy 800H Pipe Cross suppliers

We can supply Incoloy 800H pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Incoloy 800H cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Incoloy 800H Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Incoloy 800H Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Incoloy 800H UNS N08810

Hot Offer on Incoloy 800H Pipe Fittings in 2017-18

We are have a wide size range of Incoloy 800H Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Incoloy 800H Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Incoloy 800H Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Incoloy 800H Pipe Fittings buyers

Incoloy 800H Pipe Fittings Chemical Composition

ASTM B366 Incoloy 800H Buttweld Fittings Chemical Properties

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60

Incoloy 800H Pipe Fittings Mechanical Properties

ASTM B366 Mechanical Properties & Physical Properties of Incoloy 800H Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800H 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Incoloy 800H Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
FCC REVAMP PROJECT, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
TAR 2013, NETHERLANDS Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling
PROGETTO MAM, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
SURINAME PROJECT, SURINAME Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
TAR 2012, NETHERLANDS Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
LIBONDO PROJECT, CONGO Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
PROGRAM 10+, POLAND Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Incoloy 800H Pipe fittings in form of Incoloy 800H Long Radius Elbow, Incoloy 800H Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Incoloy 800H Pipe fittings in form of ASTM B366 Incoloy 800H Long Radius Return Bend, ASTM B366 Incoloy 800H Short Radius Return Bend, ASTM B366 Incoloy 800H Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H End Cap, Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
MORON AMMONIA, VENEZUELA Incoloy 800H Pipe fittings in form of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Cross, Incoloy 800H Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Incoloy 800H Pipe fittings in form of Incoloy 800H Cross, Incoloy 800H Concentric Reducer
ARO KUWAIT EPC, KUWAIT Incoloy 800H Pipe fittings in form of Incoloy 800H Eccentric Reducer, Incoloy 800H pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Incoloy 800H Pipe fittings in form of Incoloy 800H Pipe Coupling, Incoloy 800H Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H End Cap, Incoloy 800H Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Stub Ends, Incoloy 800H Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Incoloy 800H Buttweld fittings, UNS N08810 Buttweld Fittings in form of Incoloy 800H Buttweld fittings in forms of Incoloy 800H Equal Tee, Incoloy 800H Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Concentric Reducer, Incoloy 800H Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800H Buttweld fittings, UNS N08810 Pipe Fittings in form of Incoloy 800H Collar, Incoloy 800H Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800H Buttweld fittings in form of Incoloy 800H Short Radius Elbow, Incoloy 800H Return Bend, Elbow, Incoloy 800H Coupling

 

Incoloy 800H Pipe Fittings Ready Stock

Products Size
Incoloy 800H Elbows Long Radius Incoloy 800H Stub Ends

Sizes 1/2″-48″

Incoloy 800H Elbows Short Radius Incoloy 800H Crosses
Incoloy 800H Reducing Elbows Incoloy 800H Reducing Crosses
Incoloy 800H 45° Elbows Incoloy 800H 180° LR Return Bends
Incoloy 800H Tees Incoloy 800H 180° SR Return Bends
Incoloy 800H Tees Incoloy 800H Pipe Bends / Piggable Bends
Incoloy 800H Reducers Incoloy 800H Couplings
Incoloy 800H Concentric Reducers Incoloy 800H Pipe Nipples
Incoloy 800H Eccentric Reducers Incoloy 800H Forged/Plate Cut Rings
Incoloy 800H 3D Elbow Incoloy 800H End Caps
Incoloy 800H 5D Elbow Incoloy 800H Forged / Plate Circles


 

Incoloy 800H Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Incoloy 800H Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Incoloy 800H Pipe Fittings dimensions, Incoloy 800H Pipe Fittings dimension chart

INCONEL 800H ELBOWS 90° SHORT RADIUS SCHEDULE XS

NPS LBS KG
0.75 0.34
2 1.5 0.68
2.8 1.27
3 4.25 1.93
6 2.72
4 8.5 3.86
5 14 6.35
6 23 10.43
8 47.5 21.55
10 70 31.75
12 104 47.17
14 140 63.5
16 174 78.93
18 219 99.34
20 275 124.74
22
24 392 177.81
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Incoloy 800H Fittings, Incoloy 800H Pipe Fittings supplier in India, Incoloy 800H Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Incoloy 800H Pipe Fittings, Trader of Incoloy 800H Buttweld Fittings in India, Distributor of Incoloy 800H Butt Weld Fittings Dubai, Stockist of Incoloy 800H Buttweld Pipe Fittings, Incoloy 800H Elbows exporters in India, UNS N08810 Buttweld Fittings, Alloy 800H Pipe Fittings traders in India, UNS N08810 Elbow suppliers in India, Incoloy 800H Cap, Pipe Fittings available in Incoloy 800H Material, Incoloy 800H Weld Fittings Stock, Source for ASME SB 366 Incoloy 800H Pipe Fittings, Incoloy 800H Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Incoloy 800H.