ASTM B366 UNS N08811 Incoloy 800HT Pipe Fittings supplier

Incoloy 800HT Buttweld Fittings distributorIncoloy 800HT Pipe Fittings supplier, Incoloy 800HT Weld Fittings stock, Inconel 800HT Buttweld Fittings distributor in India, Incoloy 800HT Pipe Fittings exporter, Incoloy 800HT Elbow, Incoloy 800HT Tee, Incoloy 800HT Reducer

ASTM B366 UNS N08811, B366 UNS N08811, Alloy 800HT Pipe Fittings supplier, Incoloy 800HT Buttweld Pipe Fittings dealers, Incoloy 800HT Stub End

ASME SB 366 Incoloy 800HT Pipe Fittings supplier, B366 UNS N08811 Buttweld Pipe Fittings supplier in India, UNS N08811 Pipe Fittings, Alloy 800HT Weld Fittings suppliers in India, Inconel Alloy 800HT Fittings exporters in India, European Alloy 800HT Pipe Fitting, Incoloy 800HT Butt Weld Pipe Fittings supplier

Buy from 800HT Incoloy Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Incoloy 800HT Butt weld Pipe Fittings. Offer Best Price for Incoloy UNS N08811 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Incoloy 800HT Reducer, ASTM B366 800HT Inconel Buttweld Fittings in Mumbai, India, 800HT Alloy Buttweld Fitting traders in India, Incoloy 800HT Elbow Dealer in India. Supplier of Incoloy 800HT Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Incoloy 800HT Butt weld Pipe Fitting, Incoloy ASTM B366 800HT Fittings stockholder in India, ASME SB366M Incoloy 800HT Stub End wholesaler in India, manufacturer of Incoloy UNS N08811 Welded Fittings, B366 Incoloy 800HT Commercial Pipe Fittings manufacturer, Incoloy Alloy 800HT Seamless Pipe Fittings Traders in India, Stockholder of Incoloy DIN 2.4856 Tee, Incoloy 800HT Industrial Pipe Fittings, Incoloy 800HT Pipe Elbow, Incoloy 800HT Cap, Incoloy 800HT Pipe Bends manufacturer in Rajkot, Gujarat, Incoloy 800HT Tube Fittings Manufacturer

Contact Incoloy 800HT Buttweld Fittings distributor, Incoloy 800HT Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N08811 Incoloy 800HT Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N08811| ASTM B366 Incoloy 800HT Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Incoloy 800HT Butt Weld Elbow

ASTM B366 Incoloy 800HT BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
UNS N08811 Incoloy 800HT PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Incoloy 800HT PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

Incoloy 800HT Pipe Fittings have the same basic composition as Incoloy 800 Pipe Fittings, but has significantly higher creep rupture strength, resultant from the close control of the carbon, aluminium and titanium contents. Incoloy 800HT Butt Weld Fittings have good strength and excellent resistance to oxidation and carburisation in high temperature atmospheres. Incoloy 800HT Buttweld Fittings also resists corrosion in many aqueous environments. It is tested & proved that Incoloy 800HT Buttweld Pipe Fittings have higher creep rupture strength than Incoloy 800 Buttweld Pipe Fittings due to close control of C, Al, Ti. Incoloy 800HT Buttweld Pipe Fittings known for its excellent resistance to oxidation and carburisation at high temperatures. Alloy 800HT Pipe Fittings are used for corrosion resistant in many aqueous environments.

These UNS N08811 Pipe Fittings are available in a various forms such as Incoloy Alloy 800HT End Cap, Stub Ends, Pipe Nipple, Equal Tee, AWS 021 Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Incoloy 800HT Pipe Fittings, Incoloy 800HT weld fittings, Incoloy 800HT Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Incoloy 800HT material. All Incoloy 800HT elbows are mandrel formed to insure consistency. All our Incoloy 800HT Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Incoloy 800HT Pipe Fittings Trade Name

Trade Name
UNS #
Nickel Alloy Butweld Fittings
Incoloy® 800HT
N08811
B/SB366 Grade WPNIC11

Get Free Quote

Incoloy 800HT Pipe Fittings supplier, Incoloy 800HT Buttweld Fittings Supplier

Incoloy 800HT Pipe Fittings supplier, Incoloy 800HT Buttweld Fittings Supplier (Original Factory Photo)

Incoloy 800HT 24" Long Radius Elbow | Incoloy 800HT 24" Equal Tee SCH XXS | Incoloy 800HT 10" SCH 160 Short Radius Bends | Incoloy 800HT 24" Concentric Reducer SCH 80S | Incoloy 800HT Unequal Tee 16" x 12" SCH 160 | Incoloy 800HT Seamless Pipe Fittings | Incoloy 800HT 100% X-Ray Welded Pipe Fittings | Incoloy 800HT ANSI B16.9 Fittings | Seamless Reducing Tee, Incoloy 800HT

Types of Incoloy 800HT Buttweld Fittings

Incoloy 800HT Pipe Fittings Specifications

Incoloy 800HT Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N08811
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Incoloy 800HT Seamless Butt Weld Fittings: 1/2″ – 10″
Incoloy 800HT Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Incoloy 800HT Pipe Fittings in form of :
  • ASTM B366 Incoloy 800HT Equal Tee manufacturer
  • ASTM B366 Incoloy 800HT Nipple manufacturer in Mumbai
  • ASTM B366 Incoloy 800HT Long Radius Elbow manufacturer India
  • ASTM B366 Incoloy 800HT Reducing Tee manufacturer Maharashtra
  • ASTM B366 Incoloy 800HT Elbows manufacturer in Mumbai
  • ASTM B366 Incoloy 800HT Swage Nipple manufacturer in India
  • ASTM B366 Incoloy 800HT Short Radius Elbow suppliers in India
  • ASTM B366 Incoloy 800HT Reducer manufacturer in India
  • Exporter of ASTM B366 Incoloy 800HT Pipe Cap in India
  • ASTM B366 Incoloy 800HT Barrel Nipple manufacturer in India
  • ASTM B366 Incoloy 800HT 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Incoloy 800HT Concentric Reducer manufacturer in India
  • ASTM B366 Incoloy 800HT Reducing Nipple suppliers in Mumbai
  • ASTM B366 Incoloy 800HT 45 Deg Elbows manufacturer in India
  • ASTM B366 Incoloy 800HT Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Incoloy 800HT Saddles manufacturer in India
  • ASTM B366 Incoloy 800HT Weld Rings suppliers in Mumbai
  • ASTM B366 Incoloy 800HT 180 Deg Elbow wholesaler in India
  • ASTM B366 Incoloy 800HT End Cap importers in India
  • ASTM B366 Incoloy 800HT 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800HT 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Incoloy 800HT Stubend manufacturer in India
  • Manufacturer of ASTM B366 Incoloy 800HT 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Incoloy 800HT Piggable Bend manufacturer in India
  • Trader of ASTM B366 Incoloy 800HT Long Stubend manufacturer in India
  • Stockist of ASTM B366 Incoloy 800HT Tee manufacturer in India
  • Stockholder of ASTM B366 Incoloy 800HT Short Stubend Suppliers in India
  • ASTM B366 Incoloy 800HT Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800HT Bend manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800HT Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800HT Weldolets manufacturer in Mumbai, India
  • ASTM B366 Incoloy 800HT Return Bends manufacturer in Mumbai
  • ASTM B366 Incoloy 800HT Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Incoloy 800HT Long Bend with Radius – R = 3D, 5D & 10D
Incoloy 800HT Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Incoloy 800HT Long radius Bend, Incoloy 800HT Piggable Bend, Incoloy 800HT Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Incoloy 800HT Pipe Fittings manufacturer in India
SABIC Approved Incoloy 800HT Pipe Fittings supplier in India

Incoloy 800HT Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Incoloy 800HT B/W Fittings Manufacturer in India, ANSI B16.11 Incoloy 800HT Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Incoloy 800HT Pipe Fittings Make, Exporters & Stockist for

Top Incoloy 800HT Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Incoloy 800HT Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Incoloy 800HT Pipe Fittings

  • ASTM B366 Incoloy 800HT Equal Cross manufacturer in India
  • Incoloy 800HT Reducing Cross manufacturer
  • Incoloy 800HT 90°/180°/45° Long Radius Elbow manufacturer
  • Incoloy 800HT 90°/180°/45° Short Radius Elbow manufacturer
  • Incoloy 800HT End Cap manufacturer in India
  • Incoloy 800HT Pipe Cap manufacturer
  • Incoloy 800HT Lap Joint Stub Ends manufacturer
  • Incoloy 800HT Reducing Tee manufacturer in India
  • ASTM B366 Incoloy 800HT Collar suppliers in India
  • Incoloy 800HT Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 800HT Piggable Bend suppliers in India
  • Incoloy 800HT 45° Long Radius Elbow
  • Incoloy 800HT 45° Short Radius Elbow manufacturer in India
  • Incoloy 800HT 180° Short Radius Elbow
  • Incoloy 800HT Pipe Bends suppliers in India
  • Incoloy 800HT Reducing Elbow manufacturer in India
  • Incoloy 800HT Cross Fitting manufacturer in Mumbai, Maharashtra
  • Incoloy 800HT Reducing Cross Fitting suppliers in India
  • Incoloy 800HT SR Return Bend manufacturer in India
  • Incoloy 800HT Seamless Reducing Tee
  • Incoloy 800HT Couplings suppliers in India
  • Incoloy 800HT Forged Pipe Reducer
  • Incoloy 800HT Reducing Nipple manufacturer in India
  • ASTM B366 Incoloy 800HT Short Stubend manufacturer in Mumbai, Maharashtra
  • Incoloy 800HT 1.5D Elbow suppliers in India
  • ASTM B366 Incoloy 800HT Outlet Tees and Crosses manufacturer in India
  • Incoloy 800HT Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Incoloy 800HT Eccentric Reducer
  • ASTM B366 Incoloy 800HT Reducer manufacturer in India
  • ASTM B366 Incoloy 800HT 1D Elbow
  • Incoloy 800HT 3D Elbow
  • Incoloy 800HT 5D Elbow manufacturer in India
  • ASTM B366 Incoloy 800HT Lateral Tee suppliers in India
  • Incoloy 800HT End Caps
  • Incoloy 800HT Piggable Bends manufacturer in Mumbai, Maharashtra
  • Incoloy 800HT LR Return Bend manufacturer in India
  • Incoloy 800HT Threaded Elbow
  • Incoloy 800HT Seamless Fittings manufacturer in India
  • Incoloy 800HT Welded Pipe Fittings suppliers in India
  • ASTM B366 Incoloy 800HT Straight Tees
  • ASTM B366 Incoloy 800HT Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Incoloy 800HT 180° Long Radius Elbow suppliers in India
  • Incoloy 800HT Forged/Plate Cut Rings
  • Incoloy 800HT Fabricated Pipe Fittings exporters in India
  • Incoloy 800HT Swedge Nipple manufacturer in India
  • Incoloy 800HT Pipe Nipple manufacturer in India
  • Incoloy 800HT Long Stubend suppliers in India

Incoloy 800HT 90° Elbow manufacturer in India

Incoloy 800HT 90 degree pipe elbow manufacturerIncoloy 800HT 90 degree pipe elbow suppliers, Incoloy 800HT Elbows

Incoloy 800HT 90 degree elbow is a type of Incoloy 800HT Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Incoloy 800HT 90 Bend” or “Alloy 800HT Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Incoloy 800HT 90° Elbows are made of Incoloy 800HT seamless tubes within the diameter range of DN 15 – DN 1000.

Incoloy 800HT 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Incoloy 800HT Elbows other trade name: Incoloy Alloy 800HT Elbow, ASTM B366 UNS N08811 Elbow, Alloy 800HT Elbow, Incoloy 800HT Pipe Elbow, UNS N08811 Elbow

Incoloy 800HT Elbow 45° manufacturer in India

Incoloy 800HT 45 Degree Elbows manufacturerIncoloy 800HT 45 Degree Elbows suppliers

Incoloy 800HT 45 degree elbow is the Incoloy 800HT elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Incoloy 800HT 45° Elbows are made of Incoloy 800HT Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Incoloy 800HT 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Incoloy 800HT butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Incoloy 800HT 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Incoloy 800HT butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Incoloy 800HT 180° Returns manufacturer in India

Incoloy 800HT 180° Returns manufacturerIncoloy 800HT 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Incoloy 800HT Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Incoloy 800HT long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Incoloy 800HT 180° Long Radius Return
  • ASTM B366 Incoloy 800HT 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Reducing Tee manufacturer in India, Incoloy 800HT Reducing Pipe Tee manufacturer

Incoloy 800HT Reducing Tee manufacturerIncoloy 800HT Reducing Tee suppliers, Incoloy 800HT Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Incoloy 800HT straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Incoloy 800HT reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Incoloy 800HT Stright Tee
  • ASTM B366 Incoloy 800HT Reducing Tee

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Tee manufacturer in India, Incoloy 800HT Equal Tee Manufacturer

Incoloy 800HT Tee manufacturerIncoloy 800HT Pipe Tee suppliers

Our Incoloy 800HT butt weld pipe tees include Incoloy 800HT butt weld straight tees and Incoloy 800HT butt weld reducing tees. Incoloy 800HT tees are available within the range of DN 15 – DN 600. Our Incoloy 800HT butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Incoloy 800HT straight pipe tee. Incoloy 800HT Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Incoloy 800HT Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Incoloy 800HT reducing tee can connect various sizes of pipes together in one pipe system.

Incoloy 800HT Concentric Reducers manufacturer in India, Incoloy 800HT Reducer Manufacturer

Incoloy 800HT Concentric Reducers manufacturerIncoloy 800HT Pipe Reducer/ Reducers suppliers

Looking for Incoloy 800HT Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Incoloy 800HT pipe reducer: Incoloy 800HT concentric reducer and Incoloy 800HT eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Incoloy 800HT reducers are made of Incoloy 800HT seamless tube within the range of DN 15 – DN 1000.

Incoloy 800HT butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Incoloy 800HT eccentric butt welding reducer is a type of Incoloy 800HT pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Incoloy 800HT concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Incoloy 800HT eccentric reducers have a parallel edge, which results in an offsetting center. Incoloy 800HT Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Eccentric Reducers manufacturer in India

Incoloy 800HT Eccentric Reducers manufacturerIncoloy 800HT Eccentric Pipe Reducer/ Reducers suppliers

Looking for Incoloy 800HT Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

 

 

Incoloy 800HT Long Radius LR Elbows manufacturer in India, Incoloy 800HT LR Elbows manufacturer

Incoloy 800HT LR Elbows manufacturerIncoloy 800HT Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Incoloy 800HT long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Incoloy 800HT Short radius elbows have a center-to-end measurement equl to pipe diameter.

Incoloy 800HT long radius elbow costs less than a short radius fittings. Incoloy 800HT Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Incoloy 800HT 45° Long Radius Elbow
  • ASTM B366 Incoloy 800HT 90° Long Radius Elbow
  • ASTM B366 Incoloy 800HT 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Short Radius SR Elbows manufacturer in India, Incoloy 800HT SR Elbows manufacturer

Incoloy 800HT Short Radius Elbows manufacturerIncoloy 800HT Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Incoloy 800HT short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Incoloy 800HT short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Incoloy 800HT 45° Short Radius Elbow
  • ASTM B366 Incoloy 800HT 90° Short Radius Elbow
  • ASTM B366 Incoloy 800HT 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Pipe Cap Supplier, Incoloy 800HT End Cap manufacturer

Incoloy 800HT Pipe Cap manufacturerIncoloy 800HT Pipe Cap/ End Cap suppliers

Incoloy 800HT Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Incoloy 800HT butt weld caps come in various sizes and schedules to fit your Incoloy 800HT pipe and fitting needs.

Incoloy 800HT butt weld cap is a type of Incoloy 800HT Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Incoloy 800HT End Caps: cap, Seamless cap, Steel cap, Incoloy 800HT Seamless cap, pipe cap, cap end

  • ASTM B366 Incoloy 800HT Seamless cap
  • ASTM B366 Incoloy 800HT Erw cap
  • ASTM B366 Incoloy 800HT Large size cap
  • ASTM B366 Incoloy 800HT Small size cap

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Stub End manufacturer in India, Incoloy 800HT Stub Ends manufacturer

Incoloy 800HT Stub End manufacturers in IndiaIncoloy 800HT Stub End suppliers

These Incoloy 800HT Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Incoloy 800HT stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Incoloy 800HT Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Incoloy 800HT Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Incoloy 800HT Cross manufacturer in India, Incoloy 800HT Pipe Cross manufacturer

Incoloy 800HT Cross manufacturers in IndiaIncoloy 800HT Pipe Cross suppliers

We can supply Incoloy 800HT pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Incoloy 800HT cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Incoloy 800HT Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Incoloy 800HT Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Incoloy 800HT UNS N08811

Hot Offer on Incoloy 800HT Pipe Fittings in 2017-18

We are have a wide size range of Incoloy 800HT Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Incoloy 800HT Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Incoloy 800HT Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Incoloy 800HT Pipe Fittings buyers

Incoloy 800HT Pipe Fittings Chemical Composition

ASTM B366 Incoloy 800HT Buttweld Fittings Chemical Properties

Grade C Mn Si S Cu Fe Ni Cr Al Ti
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Incoloy 800HT Pipe Fittings Mechanical Properties

ASTM B366 Mechanical & Physical Properties of Incoloy 800HT Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000, MPa – 520 Psi – 30,000, MPa – 205 30 %

Incoloy 800HT Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
FCC REVAMP PROJECT, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
TAR 2013, NETHERLANDS Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling
PROGETTO MAM, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
SURINAME PROJECT, SURINAME Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
TAR 2012, NETHERLANDS Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
LIBONDO PROJECT, CONGO Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
PROGRAM 10+, POLAND Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Incoloy 800HT Pipe fittings in form of Incoloy 800HT Long Radius Elbow, Incoloy 800HT Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Incoloy 800HT Pipe fittings in form of ASTM B366 Incoloy 800HT Long Radius Return Bend, ASTM B366 Incoloy 800HT Short Radius Return Bend, ASTM B366 Incoloy 800HT Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
MORON AMMONIA, VENEZUELA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Cross, Incoloy 800HT Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Incoloy 800HT Pipe fittings in form of Incoloy 800HT Cross, Incoloy 800HT Concentric Reducer
ARO KUWAIT EPC, KUWAIT Incoloy 800HT Pipe fittings in form of Incoloy 800HT Eccentric Reducer, Incoloy 800HT pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Incoloy 800HT Pipe fittings in form of Incoloy 800HT Pipe Coupling, Incoloy 800HT Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT End Cap, Incoloy 800HT Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Stub Ends, Incoloy 800HT Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Buttweld Fittings in form of Incoloy 800HT Buttweld fittings in forms of Incoloy 800HT Equal Tee, Incoloy 800HT Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Concentric Reducer, Incoloy 800HT Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800HT Buttweld fittings, UNS N08811 Pipe Fittings in form of Incoloy 800HT Collar, Incoloy 800HT Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Incoloy 800HT Buttweld fittings in form of Incoloy 800HT Short Radius Elbow, Incoloy 800HT Return Bend, Elbow, Incoloy 800HT Coupling

 

Incoloy 800HT Pipe Fittings Ready Stock

Products Size
Incoloy 800HT Elbows Long Radius Incoloy 800HT Stub Ends

Sizes 1/2″-48″

Incoloy 800HT Elbows Short Radius Incoloy 800HT Crosses
Incoloy 800HT Reducing Elbows Incoloy 800HT Reducing Crosses
Incoloy 800HT 45° Elbows Incoloy 800HT 180° LR Return Bends
Incoloy 800HT Tees Incoloy 800HT 180° SR Return Bends
Incoloy 800HT Tees Incoloy 800HT Pipe Bends / Piggable Bends
Incoloy 800HT Reducers Incoloy 800HT Couplings
Incoloy 800HT Concentric Reducers Incoloy 800HT Pipe Nipples
Incoloy 800HT Eccentric Reducers Incoloy 800HT Forged/Plate Cut Rings
Incoloy 800HT 3D Elbow Incoloy 800HT End Caps
Incoloy 800HT 5D Elbow Incoloy 800HT Forged / Plate Circles


 

Incoloy 800HT Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Incoloy 800HT Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Incoloy 800HT Pipe Fittings dimensions, Incoloy 800HT Pipe Fittings dimension chart

INCONEL 800HT ELBOWS 90° 3D SCHEDULE STD

NPS LBS KG
2 3 1.36
6 2.72
3 10 4.54
13 5.9
4 18 8.16
5 29 13.15
6 45 20.41
8 90 40.82
10 159 72.12
12 233 105.69
14 298 135.17
16 390 176.9
18 495 224.53
20 610 276.69
22 735 333.39
24 875 396.89
26 1030 467.2
30 1370 621.42
36 1970 893.58
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Incoloy 800HT Fittings, Incoloy 800HT Pipe Fittings supplier in India, Incoloy 800HT Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Incoloy 800HT Pipe Fittings, Trader of Incoloy 800HT Buttweld Fittings in India, Distributor of Incoloy 800HT Butt Weld Fittings Dubai, Stockist of Incoloy 800HT Buttweld Pipe Fittings, Incoloy 800HT Elbows exporters in India, UNS N08811 Buttweld Fittings, Alloy 800HT Pipe Fittings traders in India, UNS N08811 Elbow suppliers in India, Incoloy 800HT Cap, Pipe Fittings available in Incoloy 800HT Material, Incoloy 800HT Weld Fittings Stock, Source for ASME SB 366 Incoloy 800HT Pipe Fittings, Incoloy 800HT Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Incoloy 800HT.