ASTM B366 UNS N08825 Incoloy 825 Pipe Fittings supplier

Incoloy 825 Buttweld Fittings distributorIncoloy 825 Pipe Fittings supplier, Incoloy 825 Weld Fittings stock, Inconel 825 Buttweld Fittings distributor in India, Incoloy 825 Pipe Fittings exporter, Incoloy 825 Elbow, Incoloy 825 Tee, Incoloy 825 Reducer

ASTM B366 UNS N08825, B366 UNS N08825, Alloy 825 Pipe Fittings supplier, Incoloy 825 Buttweld Pipe Fittings dealers, Incoloy 825 Stub End

ASME SB 366 Incoloy 825 Pipe Fittings supplier, B366 UNS N08825 Buttweld Pipe Fittings supplier in India, UNS N08825 Pipe Fittings, Alloy 825 Weld Fittings suppliers in India, Inconel Alloy 825 Fittings exporters in India, European Alloy 825 Pipe Fitting, Incoloy 825 Butt Weld Pipe Fittings supplier

Buy from 825 Incoloy Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Incoloy 825 Butt weld Pipe Fittings. Offer Best Price for Incoloy UNS N08825 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Incoloy 825 Reducer, ASTM B366 825 Inconel Buttweld Fittings in Mumbai, India, 825 Alloy Buttweld Fitting traders in India, Incoloy 825 Elbow Dealer in India. Supplier of Incoloy 825 Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Incoloy 825 Butt weld Pipe Fitting, Incoloy ASTM B366 825 Fittings stockholder in India, ASME SB366M Incoloy 825 Stub End wholesaler in India, manufacturer of Incoloy UNS N08825 Welded Fittings, B366 Incoloy 825 Commercial Pipe Fittings manufacturer, Incoloy Alloy 825 Seamless Pipe Fittings Traders in India, Stockholder of Incoloy DIN 2.4856 Tee, Incoloy 825 Industrial Pipe Fittings, Incoloy 825 Pipe Elbow, Incoloy 825 Cap, Incoloy 825 Pipe Bends manufacturer in Rajkot, Gujarat, Incoloy 825 Tube Fittings Manufacturer

Contact Incoloy 825 Buttweld Fittings distributor, Incoloy 825 Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N08825 Incoloy 825 Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N08825| ASTM B366 Incoloy 825 Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Incoloy 825 Butt Weld Elbow

ASTM B366 Incoloy 825 BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
UNS N08825 Incoloy 825 PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Incoloy 825 PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

Incoloy 825 Pipe Fittings is a Nickel-Iron-Chromium alloy with additions of Molybdenum and Copper. Incoloy 825 Butt Weld Fittings have excellent resistance to both reducing and oxidising acids, to stress-corrosion cracking and to localised pitting and crevice corrosion. Incoloy 825 Buttweld Fittings are also especially resistant to sulphuric and phosphoric acids. Incoloy 825 Buttweld Pipe Fittings used for resistant to reducing environments such as those containing sulphuric and phosphoric acids. Alloy 825 Pipe Fittings also resistant to a variety of oxidising substances such as nitric acid and nitrates.

These UNS N08825 Pipe Fittings are available in a various forms such as Incoloy Alloy 825 End Cap, AWS 022 Stub Ends, Pipe Nipple, W.Nr 2.4858 Equal Tee, AWS 021 Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Incoloy 825 Pipe Fittings, Incoloy 825 weld fittings, Incoloy 825 Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Incoloy 825 material. All Incoloy 825 elbows are mandrel formed to insure consistency. All our Incoloy 825 Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Incoloy 825 Pipe Fittings Trade Name

Trade Name
UNS #
Nickel Alloy Butweld Fittings
Incoloy® 825
N08825
B/SB366 Grade WPNICMC

Get Free Quote

Incoloy 825 Pipe Fittings supplier, Incoloy 825 Buttweld Fittings Supplier

Incoloy 825 Pipe Fittings supplier, Incoloy 825 Buttweld Fittings Supplier (Original Factory Photo)

Incoloy 825 24" Long Radius Elbow | Incoloy 825 24" Equal Tee SCH XXS | Incoloy 825 10" SCH 160 Short Radius Bends | Incoloy 825 24" Concentric Reducer SCH 80S | Incoloy 825 Unequal Tee 16" x 12" SCH 160 | Incoloy 825 Seamless Pipe Fittings | Incoloy 825 100% X-Ray Welded Pipe Fittings | Incoloy 825 ANSI B16.9 Fittings | Seamless Reducing Tee, Incoloy 825

Types of Incoloy 825 Buttweld Fittings

Incoloy 825 Pipe Fittings Specifications

Incoloy 825 Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N08825
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Incoloy 825 Seamless Butt Weld Fittings: 1/2″ – 10″
Incoloy 825 Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Incoloy 825 Pipe Fittings in form of :
  • ASTM B366 Incoloy 825 Equal Tee manufacturer
  • ASTM B366 Incoloy 825 Nipple manufacturer in Mumbai
  • ASTM B366 Incoloy 825 Long Radius Elbow manufacturer India
  • ASTM B366 Incoloy 825 Reducing Tee manufacturer Maharashtra
  • ASTM B366 Incoloy 825 Elbows manufacturer in Mumbai
  • ASTM B366 Incoloy 825 Swage Nipple manufacturer in India
  • ASTM B366 Incoloy 825 Short Radius Elbow suppliers in India
  • ASTM B366 Incoloy 825 Reducer manufacturer in India
  • Exporter of ASTM B366 Incoloy 825 Pipe Cap in India
  • ASTM B366 Incoloy 825 Barrel Nipple manufacturer in India
  • ASTM B366 Incoloy 825 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Incoloy 825 Concentric Reducer manufacturer in India
  • ASTM B366 Incoloy 825 Reducing Nipple suppliers in Mumbai
  • ASTM B366 Incoloy 825 45 Deg Elbows manufacturer in India
  • ASTM B366 Incoloy 825 Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Incoloy 825 Saddles manufacturer in India
  • ASTM B366 Incoloy 825 Weld Rings suppliers in Mumbai
  • ASTM B366 Incoloy 825 180 Deg Elbow wholesaler in India
  • ASTM B366 Incoloy 825 End Cap importers in India
  • ASTM B366 Incoloy 825 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 825 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Incoloy 825 Stubend manufacturer in India
  • Manufacturer of ASTM B366 Incoloy 825 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Incoloy 825 Piggable Bend manufacturer in India
  • Trader of ASTM B366 Incoloy 825 Long Stubend manufacturer in India
  • Stockist of ASTM B366 Incoloy 825 Tee manufacturer in India
  • Stockholder of ASTM B366 Incoloy 825 Short Stubend Suppliers in India
  • ASTM B366 Incoloy 825 Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 825 Bend manufacturer in Mumbai, India
  • ASTM B366 Incoloy 825 Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Incoloy 825 Weldolets manufacturer in Mumbai, India
  • ASTM B366 Incoloy 825 Return Bends manufacturer in Mumbai
  • ASTM B366 Incoloy 825 Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Incoloy 825 Long Bend with Radius – R = 3D, 5D & 10D
Incoloy 825 Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Incoloy 825 Long radius Bend, Incoloy 825 Piggable Bend, Incoloy 825 Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Incoloy 825 Pipe Fittings manufacturer in India
SABIC Approved Incoloy 825 Pipe Fittings supplier in India

Incoloy 825 Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Incoloy 825 B/W Fittings Manufacturer in India, ANSI B16.11 Incoloy 825 Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Incoloy 825 Pipe Fittings Make, Exporters & Stockist for

Top Incoloy 825 Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Incoloy 825 Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Incoloy 825 Pipe Fittings

  • ASTM B366 Incoloy 825 Equal Cross manufacturer in India
  • Incoloy 825 Reducing Cross manufacturer
  • Incoloy 825 90°/180°/45° Long Radius Elbow manufacturer
  • Incoloy 825 90°/180°/45° Short Radius Elbow manufacturer
  • Incoloy 825 End Cap manufacturer in India
  • Incoloy 825 Pipe Cap manufacturer
  • Incoloy 825 Lap Joint Stub Ends manufacturer
  • Incoloy 825 Reducing Tee manufacturer in India
  • ASTM B366 Incoloy 825 Collar suppliers in India
  • Incoloy 825 Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Incoloy 825 Piggable Bend suppliers in India
  • Incoloy 825 45° Long Radius Elbow
  • Incoloy 825 45° Short Radius Elbow manufacturer in India
  • Incoloy 825 180° Short Radius Elbow
  • Incoloy 825 Pipe Bends suppliers in India
  • Incoloy 825 Reducing Elbow manufacturer in India
  • Incoloy 825 Cross Fitting manufacturer in Mumbai, Maharashtra
  • Incoloy 825 Reducing Cross Fitting suppliers in India
  • Incoloy 825 SR Return Bend manufacturer in India
  • Incoloy 825 Seamless Reducing Tee
  • Incoloy 825 Couplings suppliers in India
  • Incoloy 825 Forged Pipe Reducer
  • Incoloy 825 Reducing Nipple manufacturer in India
  • ASTM B366 Incoloy 825 Short Stubend manufacturer in Mumbai, Maharashtra
  • Incoloy 825 1.5D Elbow suppliers in India
  • ASTM B366 Incoloy 825 Outlet Tees and Crosses manufacturer in India
  • Incoloy 825 Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Incoloy 825 Eccentric Reducer
  • ASTM B366 Incoloy 825 Reducer manufacturer in India
  • ASTM B366 Incoloy 825 1D Elbow
  • Incoloy 825 3D Elbow
  • Incoloy 825 5D Elbow manufacturer in India
  • ASTM B366 Incoloy 825 Lateral Tee suppliers in India
  • Incoloy 825 End Caps
  • Incoloy 825 Piggable Bends manufacturer in Mumbai, Maharashtra
  • Incoloy 825 LR Return Bend manufacturer in India
  • Incoloy 825 Threaded Elbow
  • Incoloy 825 Seamless Fittings manufacturer in India
  • Incoloy 825 Welded Pipe Fittings suppliers in India
  • ASTM B366 Incoloy 825 Straight Tees
  • ASTM B366 Incoloy 825 Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Incoloy 825 180° Long Radius Elbow suppliers in India
  • Incoloy 825 Forged/Plate Cut Rings
  • Incoloy 825 Fabricated Pipe Fittings exporters in India
  • Incoloy 825 Swedge Nipple manufacturer in India
  • Incoloy 825 Pipe Nipple manufacturer in India
  • Incoloy 825 Long Stubend suppliers in India

Incoloy 825 90° Elbow manufacturer in India

Incoloy 825 90 degree pipe elbow manufacturerIncoloy 825 90 degree pipe elbow suppliers, Incoloy 825 Elbows

Incoloy 825 90 degree elbow is a type of Incoloy 825 Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Incoloy 825 90 Bend” or “Alloy 825 Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Incoloy 825 90° Elbows are made of Incoloy 825 seamless tubes within the diameter range of DN 15 – DN 1000.

Incoloy 825 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Incoloy 825 Elbows other trade name: Incoloy Alloy 825 Elbow, ASTM B366 UNS N08825 Elbow, Alloy 825 Elbow, Incoloy 825 Pipe Elbow, UNS N08825 Elbow

Incoloy 825 Elbow 45° manufacturer in India

Incoloy 825 45 Degree Elbows manufacturerIncoloy 825 45 Degree Elbows suppliers

Incoloy 825 45 degree elbow is the Incoloy 825 elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Incoloy 825 45° Elbows are made of Incoloy 825 Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Incoloy 825 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Incoloy 825 butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Incoloy 825 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Incoloy 825 butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Incoloy 825 180° Returns manufacturer in India

Incoloy 825 180° Returns manufacturerIncoloy 825 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Incoloy 825 Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Incoloy 825 long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Incoloy 825 180° Long Radius Return
  • ASTM B366 Incoloy 825 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Reducing Tee manufacturer in India, Incoloy 825 Reducing Pipe Tee manufacturer

Incoloy 825 Reducing Tee manufacturerIncoloy 825 Reducing Tee suppliers, Incoloy 825 Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Incoloy 825 straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Incoloy 825 reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Incoloy 825 Stright Tee
  • ASTM B366 Incoloy 825 Reducing Tee

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Tee manufacturer in India, Incoloy 825 Equal Tee Manufacturer

Incoloy 825 Tee manufacturerIncoloy 825 Pipe Tee suppliers

Our Incoloy 825 butt weld pipe tees include Incoloy 825 butt weld straight tees and Incoloy 825 butt weld reducing tees. Incoloy 825 tees are available within the range of DN 15 – DN 600. Our Incoloy 825 butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Incoloy 825 straight pipe tee. Incoloy 825 Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Incoloy 825 Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Incoloy 825 reducing tee can connect various sizes of pipes together in one pipe system.

Incoloy 825 Concentric Reducers manufacturer in India, Incoloy 825 Reducer Manufacturer

Incoloy 825 Concentric Reducers manufacturerIncoloy 825 Pipe Reducer/ Reducers suppliers

Looking for Incoloy 825 Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Incoloy 825 pipe reducer: Incoloy 825 concentric reducer and Incoloy 825 eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Incoloy 825 reducers are made of Incoloy 825 seamless tube within the range of DN 15 – DN 1000.

Incoloy 825 butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Incoloy 825 eccentric butt welding reducer is a type of Incoloy 825 pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Incoloy 825 concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Incoloy 825 eccentric reducers have a parallel edge, which results in an offsetting center. Incoloy 825 Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Eccentric Reducers manufacturer in India

Incoloy 825 Eccentric Reducers manufacturerIncoloy 825 Eccentric Pipe Reducer/ Reducers suppliers

Looking for Incoloy 825 Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

 

 

Incoloy 825 Long Radius LR Elbows manufacturer in India, Incoloy 825 LR Elbows manufacturer

Incoloy 825 LR Elbows manufacturerIncoloy 825 Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Incoloy 825 long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Incoloy 825 Short radius elbows have a center-to-end measurement equl to pipe diameter.

Incoloy 825 long radius elbow costs less than a short radius fittings. Incoloy 825 Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Incoloy 825 45° Long Radius Elbow
  • ASTM B366 Incoloy 825 90° Long Radius Elbow
  • ASTM B366 Incoloy 825 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Short Radius SR Elbows manufacturer in India, Incoloy 825 SR Elbows manufacturer

Incoloy 825 Short Radius Elbows manufacturerIncoloy 825 Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Incoloy 825 short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Incoloy 825 short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Incoloy 825 45° Short Radius Elbow
  • ASTM B366 Incoloy 825 90° Short Radius Elbow
  • ASTM B366 Incoloy 825 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Pipe Cap Supplier, Incoloy 825 End Cap manufacturer

Incoloy 825 Pipe Cap manufacturerIncoloy 825 Pipe Cap/ End Cap suppliers

Incoloy 825 Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Incoloy 825 butt weld caps come in various sizes and schedules to fit your Incoloy 825 pipe and fitting needs.

Incoloy 825 butt weld cap is a type of Incoloy 825 Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Incoloy 825 End Caps: cap, Seamless cap, Steel cap, Incoloy 825 Seamless cap, pipe cap, cap end

  • ASTM B366 Incoloy 825 Seamless cap
  • ASTM B366 Incoloy 825 Erw cap
  • ASTM B366 Incoloy 825 Large size cap
  • ASTM B366 Incoloy 825 Small size cap

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Stub End manufacturer in India, Incoloy 825 Stub Ends manufacturer

Incoloy 825 Stub End manufacturers in IndiaIncoloy 825 Stub End suppliers

These Incoloy 825 Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Incoloy 825 stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Incoloy 825 Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Incoloy 825 Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Incoloy 825 Cross manufacturer in India, Incoloy 825 Pipe Cross manufacturer

Incoloy 825 Cross manufacturers in IndiaIncoloy 825 Pipe Cross suppliers

We can supply Incoloy 825 pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Incoloy 825 cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Incoloy 825 Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Incoloy 825 Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Incoloy 825 UNS N08825

Hot Offer on Incoloy 825 Pipe Fittings in 2017-18

We are have a wide size range of Incoloy 825 Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Incoloy 825 Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Incoloy 825 Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Incoloy 825 Pipe Fittings buyers

Incoloy 825 Pipe Fittings Chemical Composition

ASTM B366 Incoloy 825 Buttweld Fittings Chemical Properties

C Ti Mn Fe S Si Cr Ni Cu Mo Al
MIN 0.600 22.000 19.500 38.000 1.500 2.500
MAX 0.050 1.200 1.000 0.030 0.500 23.500 46.000 3.000 3.500 0.200

Incoloy 825 Pipe Fittings Mechanical Properties

ASTM B366 Mechanical Properties of Incoloy 825 Buttweld Fittings

Yield Strength 
0.2% Proof 
(MPa)
Tensile strength 
(MPa)
Elongation 
(% in 50mm)
Hardness 
(HBW)
MIN 241 586 30.00  
MAX       237

Physical Properties of ASTM B366 Incoloy 825 Pipe Fittings

Density lb/in³ 0.294
Mg/m³ 8.14
Specific Heat Btu/lb•°F 0.105
J/kg•°C 440
Melting Range °F 2500-2550
°C 1370-1400
Curie Temperature °F <-320
°C <-196
Permeability 200 oersted (15.9 kA/m) 1.005

 

Incoloy 825 Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
FCC REVAMP PROJECT, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
TAR 2013, NETHERLANDS Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling
PROGETTO MAM, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
SURINAME PROJECT, SURINAME Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
TAR 2012, NETHERLANDS Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
LIBONDO PROJECT, CONGO Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
PROGRAM 10+, POLAND Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Incoloy 825 Pipe fittings in form of Incoloy 825 Long Radius Elbow, Incoloy 825 Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Incoloy 825 Pipe fittings in form of ASTM B366 Incoloy 825 Long Radius Return Bend, ASTM B366 Incoloy 825 Short Radius Return Bend, ASTM B366 Incoloy 825 Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 End Cap, Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
MORON AMMONIA, VENEZUELA Incoloy 825 Pipe fittings in form of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Cross, Incoloy 825 Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Incoloy 825 Pipe fittings in form of Incoloy 825 Cross, Incoloy 825 Concentric Reducer
ARO KUWAIT EPC, KUWAIT Incoloy 825 Pipe fittings in form of Incoloy 825 Eccentric Reducer, Incoloy 825 pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Incoloy 825 Pipe fittings in form of Incoloy 825 Pipe Coupling, Incoloy 825 Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 End Cap, Incoloy 825 Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Stub Ends, Incoloy 825 Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Incoloy 825 Buttweld fittings, UNS N08825 Buttweld Fittings in form of Incoloy 825 Buttweld fittings in forms of Incoloy 825 Equal Tee, Incoloy 825 Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Concentric Reducer, Incoloy 825 Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Incoloy 825 Buttweld fittings, UNS N08825 Pipe Fittings in form of Incoloy 825 Collar, Incoloy 825 Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Incoloy 825 Buttweld fittings in form of Incoloy 825 Short Radius Elbow, Incoloy 825 Return Bend, Elbow, Incoloy 825 Coupling

 

Incoloy 825 Pipe Fittings Ready Stock

Products Size
Incoloy 825 Elbows Long Radius Incoloy 825 Stub Ends

Sizes 1/2″-48″

Incoloy 825 Elbows Short Radius Incoloy 825 Crosses
Incoloy 825 Reducing Elbows Incoloy 825 Reducing Crosses
Incoloy 825 45° Elbows Incoloy 825 180° LR Return Bends
Incoloy 825 Tees Incoloy 825 180° SR Return Bends
Incoloy 825 Tees Incoloy 825 Pipe Bends / Piggable Bends
Incoloy 825 Reducers Incoloy 825 Couplings
Incoloy 825 Concentric Reducers Incoloy 825 Pipe Nipples
Incoloy 825 Eccentric Reducers Incoloy 825 Forged/Plate Cut Rings
Incoloy 825 3D Elbow Incoloy 825 End Caps
Incoloy 825 5D Elbow Incoloy 825 Forged / Plate Circles


 

Incoloy 825 Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Incoloy 825 Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Incoloy 825 Pipe Fittings dimensions, Incoloy 825 Pipe Fittings dimension chart

INCONEL 825 ELBOWS 90° 3D SCHEDULE XS

NPS LBS KG
2 4 1.81
8 3.63
3 13 5.9
18 8.16
4 25 11.34
5 43 19.5
6 70 31.75
8 140 63.5
10 218 98.88
12 310 140.61
14 400 181.44
16 520 235.87
18 660 299.37
20 810 367.41
22 980 444.52
24 1170 530.7
26 1370 621.42
30 1830 830.07
36 2630 1192.95
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Incoloy 825 Fittings, Incoloy 825 Pipe Fittings supplier in India, Incoloy 825 Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Incoloy 825 Pipe Fittings, Trader of Incoloy 825 Buttweld Fittings in India, Distributor of Incoloy 825 Butt Weld Fittings Dubai, Stockist of Incoloy 825 Buttweld Pipe Fittings, Incoloy 825 Elbows exporters in India, UNS N08825 Buttweld Fittings, Alloy 825 Pipe Fittings traders in India, UNS N08825 Elbow suppliers in India, Incoloy 825 Cap, Pipe Fittings available in Incoloy 825 Material, Incoloy 825 Weld Fittings Stock, Source for ASME SB 366 Incoloy 825 Pipe Fittings, Incoloy 825 Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Incoloy 825.