ASTM B366 UNS N06600 Inconel 600 Pipe Fittings supplier

Inconel 600 Buttweld Fittings distributorInconel 600 Pipe Fittings supplier, Inconel 600 Weld Fittings stock, Inconel 600 Buttweld Fittings distributor in India, Inconel 600 Pipe Fittings exporter, Inconel 600 Elbow, Inconel 600 Tee, Inconel 600 Reducer

ASTM B366 UNS N06600, B366 UNS N06600, Alloy 600 Pipe Fittings supplier, Inconel 600 Buttweld Pipe Fittings dealers, Inconel 600 Stub End

ASME SB 366 Inconel 600 Pipe Fittings supplier, B366 UNS N06600 Buttweld Pipe Fittings supplier in India, UNS N06600 Pipe Fittings, Alloy 600 Weld Fittings suppliers in India, Inconel Alloy 600 Fittings exporters in India, European Alloy 600 Pipe Fitting, Inconel 600 Butt Weld Pipe Fittings supplier

Buy from 600 Inconel Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Inconel 600 Butt weld Pipe Fittings. Offer Best Price for Inconel UNS N06600 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Inconel 600 Reducer, ASTM B366 600 Inconel Buttweld Fittings in Mumbai, India, 600 Alloy Buttweld Fitting traders in India, Inconel 600 Elbow Dealer in India. Supplier of Inconel 600 Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Inconel 600 Butt weld Pipe Fitting, Inconel ASTM B366 600 Fittings stockholder in India, ASME SB366M Inconel 600 Stub End wholesaler in India, manufacturer of Inconel UNS N06600 Welded Fittings, B366 Inconel 600 Commercial Pipe Fittings manufacturer, Inconel Alloy 600 Seamless Pipe Fittings Traders in India, Stockholder of Inconel DIN 2.4856 Tee, Inconel 600 Industrial Pipe Fittings, Inconel 600 Pipe Elbow, Inconel 600 Cap, Inconel 600 Pipe Bends manufacturer in Rajkot, Gujarat, Inconel 600 Tube Fittings Manufacturer

Contact Inconel 600 Buttweld Fittings distributor, Inconel 600 Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N06600 Inconel 600 Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N06600| ASTM B366 Inconel 600 Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Inconel 600 Butt Weld Elbow

ASTM B366 INCONEL 600 BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE: INR 2,422/- Per Pcs.
UNS N06600 INCONEL 600 PIPE FITTING -1.500 IN, CAP-BUTTWELD : INR 5,562/- Per Kg
INCONEL 600 PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD: INR 7,727/- Per Pcs.

Check complete price list here

Inconel 600 Pipe Fitting is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Inconel 600 Butt Weld Fittings also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. We stock materials of Inconel 600 Buttweld Fittings in European, Japanese and Indian origins conforming to International Standards and Specifications.

Alloy 600 Pipe Fittings are just one of the specialty steels available at our premise. These UNS N06600 Pipe Fittings are available in a various forms such as Inconel 600 End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Inconel 600 Pipe Fittings, Inconel 600 weld fittings, Inconel 600 Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Inconel 600 material. All Inconel 600 elbows are mandrel formed to insure consistency. All our Inconel 600 Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Inconel 600 Pipe Fittings Trade Name

Trade Name
UNS #
Nickel Alloy Butweld Fittings
Inconel® 600
N06600
B/SB366 Grade WPNCI

Get Free Quote

Inconel 600 Pipe Fittings supplier, Inconel 600 Buttweld Fittings Supplier

Inconel 600 Pipe Fittings supplier, Inconel 600 Buttweld Fittings Supplier (Original Factory Photo)

Inconel 600 24" Long Radius Elbow | Inconel 600 24" Equal Tee SCH XXS | Inconel 600 10" SCH 160 Short Radius Bends | Inconel 600 24" Concentric Reducer SCH 80S | Inconel 600 Unequal Tee 16" x 12" SCH 160 | Inconel 600 Seamless Pipe Fittings | Inconel 600 100% X-Ray Welded Pipe Fittings | Inconel 600 ANSI B16.9 Fittings | Seamless Reducing Tee, Inconel 600

Types of Inconel 600 Buttweld Fittings

Inconel 600 Pipe Fittings Specifications

Inconel 600 Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N06600
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Inconel 600 Seamless Butt Weld Fittings: 1/2″ – 10″
Inconel 600 Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Inconel 600 Pipe Fittings in form of :
  • ASTM B366 Inconel 600 Equal Tee manufacturer
  • ASTM B366 Inconel 600 Nipple manufacturer in Mumbai
  • ASTM B366 Inconel 600 Long Radius Elbow manufacturer India
  • ASTM B366 Inconel 600 Reducing Tee manufacturer Maharashtra
  • ASTM B366 Inconel 600 Elbows manufacturer in Mumbai
  • ASTM B366 Inconel 600 Swage Nipple manufacturer in India
  • ASTM B366 Inconel 600 Short Radius Elbow suppliers in India
  • ASTM B366 Inconel 600 Reducer manufacturer in India
  • Exporter of ASTM B366 Inconel 600 Pipe Cap in India
  • ASTM B366 Inconel 600 Barrel Nipple manufacturer in India
  • ASTM B366 Inconel 600 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Inconel 600 Concentric Reducer manufacturer in India
  • ASTM B366 Inconel 600 Reducing Nipple suppliers in Mumbai
  • ASTM B366 Inconel 600 45 Deg Elbows manufacturer in India
  • ASTM B366 Inconel 600 Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Inconel 600 Saddles manufacturer in India
  • ASTM B366 Inconel 600 Weld Rings suppliers in Mumbai
  • ASTM B366 Inconel 600 180 Deg Elbow wholesaler in India
  • ASTM B366 Inconel 600 End Cap importers in India
  • ASTM B366 Inconel 600 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 600 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Inconel 600 Stubend manufacturer in India
  • Manufacturer of ASTM B366 Inconel 600 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Inconel 600 Piggable Bend manufacturer in India
  • Trader of ASTM B366 Inconel 600 Long Stubend manufacturer in India
  • Stockist of ASTM B366 Inconel 600 Tee manufacturer in India
  • Stockholder of ASTM B366 Inconel 600 Short Stubend Suppliers in India
  • ASTM B366 Inconel 600 Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 600 Bend manufacturer in Mumbai, India
  • ASTM B366 Inconel 600 Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Inconel 600 Weldolets manufacturer in Mumbai, India
  • ASTM B366 Inconel 600 Return Bends manufacturer in Mumbai
  • ASTM B366 Inconel 600 Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Inconel 600 Long Bend with Radius – R = 3D, 5D & 10D
Inconel 600 Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Inconel 600 Long radius Bend, Inconel 600 Piggable Bend, Inconel 600 Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Inconel 600 Pipe Fittings manufacturer in India
SABIC Approved Inconel 600 Pipe Fittings supplier in India

Inconel 600 Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Inconel 600 B/W Fittings Manufacturer in India, ANSI B16.11 Inconel 600 Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Inconel 600 Pipe Fittings Make, Exporters & Stockist for

Top Inconel 600 Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Inconel 600 Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Inconel 600 Pipe Fittings

  • ASTM B366 Inconel 600 Equal Cross manufacturer in India
  • Inconel 600 Reducing Cross manufacturer
  • Inconel 600 90°/180°/45° Long Radius Elbow manufacturer
  • Inconel 600 90°/180°/45° Short Radius Elbow manufacturer
  • Inconel 600 End Cap manufacturer in India
  • Inconel 600 Pipe Cap manufacturer
  • Inconel 600 Lap Joint Stub Ends manufacturer
  • Inconel 600 Reducing Tee manufacturer in India
  • ASTM B366 Inconel 600 Collar suppliers in India
  • Inconel 600 Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 600 Piggable Bend suppliers in India
  • Inconel 600 45° Long Radius Elbow
  • Inconel 600 45° Short Radius Elbow manufacturer in India
  • Inconel 600 180° Short Radius Elbow
  • Inconel 600 Pipe Bends suppliers in India
  • Inconel 600 Reducing Elbow manufacturer in India
  • Inconel 600 Cross Fitting manufacturer in Mumbai, Maharashtra
  • Inconel 600 Reducing Cross Fitting suppliers in India
  • Inconel 600 SR Return Bend manufacturer in India
  • Inconel 600 Seamless Reducing Tee
  • Inconel 600 Couplings suppliers in India
  • Inconel 600 Forged Pipe Reducer
  • Inconel 600 Reducing Nipple manufacturer in India
  • ASTM B366 Inconel 600 Short Stubend manufacturer in Mumbai, Maharashtra
  • Inconel 600 1.5D Elbow suppliers in India
  • ASTM B366 Inconel 600 Outlet Tees and Crosses manufacturer in India
  • Inconel 600 Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Inconel 600 Eccentric Reducer
  • ASTM B366 Inconel 600 Reducer manufacturer in India
  • ASTM B366 Inconel 600 1D Elbow
  • Inconel 600 3D Elbow
  • Inconel 600 5D Elbow manufacturer in India
  • ASTM B366 Inconel 600 Lateral Tee suppliers in India
  • Inconel 600 End Caps
  • Inconel 600 Piggable Bends manufacturer in Mumbai, Maharashtra
  • Inconel 600 LR Return Bend manufacturer in India
  • Inconel 600 Threaded Elbow
  • Inconel 600 Seamless Fittings manufacturer in India
  • Inconel 600 Welded Pipe Fittings suppliers in India
  • ASTM B366 Inconel 600 Straight Tees
  • ASTM B366 Inconel 600 Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Inconel 600 180° Long Radius Elbow suppliers in India
  • Inconel 600 Forged/Plate Cut Rings
  • Inconel 600 Fabricated Pipe Fittings exporters in India
  • Inconel 600 Swedge Nipple manufacturer in India
  • Inconel 600 Pipe Nipple manufacturer in India
  • Inconel 600 Long Stubend suppliers in India

Inconel 600 90° Elbow manufacturer in India

Inconel 600 90 degree pipe elbow manufacturerInconel 600 90 degree pipe elbow suppliers, Inconel 600 Elbows

Inconel 600 90 degree elbow is a type of Inconel 600 Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Inconel 600 90 Bend” or “Alloy 600 Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Inconel 600 90° Elbows are made of Inconel 600 seamless tubes within the diameter range of DN 15 – DN 1000.

Inconel 600 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Inconel 600 Elbows other trade name: Inconel Alloy 600 Elbow, ASTM B366 UNS N06600 Elbow, Alloy 600 Elbow, Inconel 600 Pipe Elbow, UNS N06600 Elbow

Inconel 600 Elbow 45° manufacturer in India

Inconel 600 45 Degree Elbows manufacturerInconel 600 45 Degree Elbows suppliers

Inconel 600 45 degree elbow is the Inconel 600 elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Inconel 600 45° Elbows are made of Inconel 600 Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Inconel 600 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Inconel 600 butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Inconel 600 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Inconel 600 butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Inconel 600 180° Returns manufacturer in India

Inconel 600 180° Returns manufacturerInconel 600 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Inconel 600 Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Inconel 600 long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Inconel 600 180° Long Radius Return
  • ASTM B366 Inconel 600 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Reducing Tee manufacturer in India, Inconel 600 Reducing Pipe Tee manufacturer

Inconel 600 Reducing Tee manufacturerInconel 600 Reducing Tee suppliers, Inconel 600 Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Inconel 600 straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Inconel 600 reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Inconel 600 Stright Tee
  • ASTM B366 Inconel 600 Reducing Tee

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Tee manufacturer in India, Inconel 600 Equal Tee Manufacturer

Inconel 600 Tee manufacturerInconel 600 Pipe Tee suppliers

Our Inconel 600 butt weld pipe tees include Inconel 600 butt weld straight tees and Inconel 600 butt weld reducing tees. Inconel 600 tees are available within the range of DN 15 – DN 600. Our Inconel 600 butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Inconel 600 straight pipe tee. Inconel 600 Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Inconel 600 Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Inconel 600 reducing tee can connect various sizes of pipes together in one pipe system.

Inconel 600 Concentric Reducers manufacturer in India, Inconel 600 Reducer Manufacturer

Inconel 600 Concentric Reducers manufacturerInconel 600 Pipe Reducer/ Reducers suppliers

Looking for Inconel 600 Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Inconel 600 pipe reducer: Inconel 600 concentric reducer and Inconel 600 eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Inconel 600 reducers are made of Inconel 600 seamless tube within the range of DN 15 – DN 1000.

Inconel 600 butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Inconel 600 eccentric butt welding reducer is a type of Inconel 600 pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Inconel 600 concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Inconel 600 eccentric reducers have a parallel edge, which results in an offsetting center. Inconel 600 Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Eccentric Reducers manufacturer in India

Inconel 600 Eccentric Reducers manufacturerInconel 600 Eccentric Pipe Reducer/ Reducers suppliers

Looking for Inconel 600 Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

 

 

Inconel 600 Long Radius LR Elbows manufacturer in India, Inconel 600 LR Elbows manufacturer

Inconel 600 LR Elbows manufacturerInconel 600 Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Inconel 600 long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Inconel 600 Short radius elbows have a center-to-end measurement equl to pipe diameter.

Inconel 600 long radius elbow costs less than a short radius fittings. Inconel 600 Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Inconel 600 45° Long Radius Elbow
  • ASTM B366 Inconel 600 90° Long Radius Elbow
  • ASTM B366 Inconel 600 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Short Radius SR Elbows manufacturer in India, Inconel 600 SR Elbows manufacturer

Inconel 600 Short Radius Elbows manufacturerInconel 600 Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Inconel 600 short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Inconel 600 short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Inconel 600 45° Short Radius Elbow
  • ASTM B366 Inconel 600 90° Short Radius Elbow
  • ASTM B366 Inconel 600 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Pipe Cap Supplier, Inconel 600 End Cap manufacturer

Inconel 600 Pipe Cap manufacturerInconel 600 Pipe Cap/ End Cap suppliers

Inconel 600 Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Inconel 600 butt weld caps come in various sizes and schedules to fit your Inconel 600 pipe and fitting needs.

Inconel 600 butt weld cap is a type of Inconel 600 Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Inconel 600 End Caps: cap, Seamless cap, Steel cap, Inconel 600 Seamless cap, pipe cap, cap end

  • ASTM B366 Inconel 600 Seamless cap
  • ASTM B366 Inconel 600 Erw cap
  • ASTM B366 Inconel 600 Large size cap
  • ASTM B366 Inconel 600 Small size cap

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Stub End manufacturer in India, Inconel 600 Stub Ends manufacturer

Inconel 600 Stub End manufacturers in IndiaInconel 600 Stub End suppliers

These Inconel 600 Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Inconel 600 stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Inconel 600 Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Inconel 600 Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Inconel 600 Cross manufacturer in India, Inconel 600 Pipe Cross manufacturer

Inconel 600 Cross manufacturers in IndiaInconel 600 Pipe Cross suppliers

We can supply Inconel 600 pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Inconel 600 cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Inconel 600 Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Inconel 600 Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Inconel 600 UNS N06600

Hot Offer on Inconel 600 Pipe Fittings in 2017-18

We are have a wide size range of Inconel 600 Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Inconel 600 Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Inconel 600 Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Inconel 600 Pipe Fittings buyers

Inconel 600 Pipe Fittings Chemical Composition

ASTM B366 Inconel 600 Buttweld Fittings Chemical Properties

C Mn S Fe Si Ni Cr Cu  
MIN 6.000 72.000 14.000
MAX 0.150 1.000 0.015 10.000 0.500 17.000 0.500

Inconel 600 Pipe Fittings Mechanical Properties

ASTM B366 Mechanical Properties of Inconel 600 Buttweld Fittings

Yield Strength 
0.2% Proof 
(MPa)
Tensile strength 
(MPa)
Elongation 
(% in 50mm)
Hardness 
(HRB)
MIN 240 550 30.00  
MAX       88

Physical Properties of ASTM B366 Inconel 600 Pipe Fittings

Density lb/in³ 0.305
Mg/m³ 8.44
Specific Heat Btu/lb°F (J/kg°C) 0.106
J/kg-°C 444
Melting Range °F 2470-2575
°C 1354-1413
Electrical Resistivity ohm-circ mil/ft 620
μΩ-m 1.03
Curie Temperature °F -192
°C -124
Permeability 200 oersted (15.9 kA/m) 1.01

Inconel 600 Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
FCC REVAMP PROJECT, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
TAR 2013, NETHERLANDS Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling
PROGETTO MAM, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
SURINAME PROJECT, SURINAME Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
TAR 2012, NETHERLANDS Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
LIBONDO PROJECT, CONGO Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
PROGRAM 10+, POLAND Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Inconel 600 Pipe fittings in form of Inconel 600 Long Radius Elbow, Inconel 600 Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Inconel 600 Pipe fittings in form of ASTM B366 Inconel 600 Long Radius Return Bend, ASTM B366 Inconel 600 Short Radius Return Bend, ASTM B366 Inconel 600 Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Inconel 600 Pipe fittings in form of Inconel 600 End Cap, Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
MORON AMMONIA, VENEZUELA Inconel 600 Pipe fittings in form of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Pipe Cross, Inconel 600 Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Inconel 600 Pipe fittings in form of Inconel 600 Cross, Inconel 600 Concentric Reducer
ARO KUWAIT EPC, KUWAIT Inconel 600 Pipe fittings in form of Inconel 600 Eccentric Reducer, Inconel 600 pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Inconel 600 Pipe fittings in form of Inconel 600 Pipe Coupling, Inconel 600 Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Inconel 600 Buttweld fittings in form of Inconel 600 End Cap, Inconel 600 Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Stub Ends, Inconel 600 Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Inconel 600 Buttweld fittings, UNS N06600 Buttweld Fittings in form of Inconel 600 Buttweld fittings in forms of Inconel 600 Equal Tee, Inconel 600 Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Concentric Reducer, Inconel 600 Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Inconel 600 Buttweld fittings, UNS N06600 Pipe Fittings in form of Inconel 600 Collar, Inconel 600 Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Inconel 600 Buttweld fittings in form of Inconel 600 Short Radius Elbow, Inconel 600 Return Bend, Elbow, Inconel 600 Coupling

 

Inconel 600 Pipe Fittings Ready Stock

Products Size
Inconel 600 Elbows Long Radius Inconel 600 Stub Ends

Sizes 1/2″-48″

Inconel 600 Elbows Short Radius Inconel 600 Crosses
Inconel 600 Reducing Elbows Inconel 600 Reducing Crosses
Inconel 600 45° Elbows Inconel 600 180° LR Return Bends
Inconel 600 Tees Inconel 600 180° SR Return Bends
Inconel 600 Tees Inconel 600 Pipe Bends / Piggable Bends
Inconel 600 Reducers Inconel 600 Couplings
Inconel 600 Concentric Reducers Inconel 600 Pipe Nipples
Inconel 600 Eccentric Reducers Inconel 600 Forged/Plate Cut Rings
Inconel 600 3D Elbow Inconel 600 End Caps
Inconel 600 5D Elbow Inconel 600 Forged / Plate Circles


 

Inconel 600 Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Inconel 600 Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Inconel 600 Pipe Fittings dimensions, Inconel 600 Pipe Fittings dimension chart

Weights of Inconel 600 Buttweld Elbows

INCONEL 600 ELBOWS 90° LONG RADIUS SCHEDULE STD

NPS LBS KG
1/2 0.18 0.08
3/4 0.19 0.09
1 0.4 0.18
0.6 0.27
0.9 0.41
2 1.6 0.73
3.25 1.47
3 5 2.27
6.75 3.06
4 9 4.08
5 15 6.8
6 24.5 11.11
8 50 22.68
10 88 39.92
12 125 56.7
14 160 72.57
16 206 93.44
18 260 117.93
20 320 145.15
22 394 178.72
24 460 208.65
26 550 249.48
30 734 332.94
36 1062 481.72
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Inconel 600 Fittings, Inconel 600 Pipe Fittings supplier in India, Inconel 600 Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Inconel 600 Pipe Fittings, Trader of Inconel 600 Buttweld Fittings in India, Distributor of Inconel 600 Butt Weld Fittings Dubai, Stockist of Inconel 600 Buttweld Pipe Fittings, Inconel 600 Elbows exporters in India, UNS N06600 Buttweld Fittings, Alloy 600 Pipe Fittings traders in India, UNS N06600 Elbow suppliers in India, Inconel 600 Cap, Pipe Fittings available in Inconel 600 Material, Inconel 600 Weld Fittings Stock, Source for ASME SB 366 Inconel 600 Pipe Fittings, Inconel 600 Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Inconel 600.