ASTM B366 UNS N06601 Inconel 601 Pipe Fittings supplier

Inconel 601 Buttweld Fittings distributorInconel 601 Pipe Fittings supplier, Inconel 601 Weld Fittings stock, Inconel 601 Buttweld Fittings distributor in India, Inconel 601 Pipe Fittings exporter, Inconel 601 Elbow, Inconel 601 Tee, Inconel 601 Reducer

ASTM B366 UNS N06601, B366 UNS N06601, Alloy 601 Pipe Fittings supplier, Inconel 601 Buttweld Pipe Fittings dealers, Inconel 601 Stub End

ASME SB 366 Inconel 601 Pipe Fittings supplier, B366 UNS N06601 Buttweld Pipe Fittings supplier in India, UNS N06601 Pipe Fittings, Alloy 601 Weld Fittings suppliers in India, Inconel Alloy 601 Fittings exporters in India, European Alloy 601 Pipe Fitting, Inconel 601 Butt Weld Pipe Fittings supplier

Buy from 601 Inconel Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Inconel 601 Butt weld Pipe Fittings. Offer Best Price for Inconel UNS N06601 Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Inconel 601 Reducer, ASTM B366 601 Inconel Buttweld Fittings in Mumbai, India, 601 Alloy Buttweld Fitting traders in India, Inconel 601 Elbow Dealer in India. Supplier of Inconel 601 Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Inconel 601 Butt weld Pipe Fitting, Inconel ASTM B366 601 Fittings stockholder in India, ASME SB366M Inconel 601 Stub End wholesaler in India, manufacturer of Inconel UNS N06601 Welded Fittings, B366 Inconel 601 Commercial Pipe Fittings manufacturer, Inconel Alloy 601 Seamless Pipe Fittings Traders in India, Stockholder of Inconel DIN 2.4856 Tee, Inconel 601 Industrial Pipe Fittings, Inconel 601 Pipe Elbow, Inconel 601 Cap, Inconel 601 Pipe Bends manufacturer in Rajkot, Gujarat, Inconel 601 Tube Fittings Manufacturer

Contact Inconel 601 Buttweld Fittings distributor, Inconel 601 Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 UNS N06601 Inconel 601 Pipe Fittings Price in India

Export Price List of ASTM B366 UNS N06601| ASTM B366 Inconel 601 Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Inconel 601 Butt Weld Elbow

ASTM B366 INCONEL 601 BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE: INR 2,422/- Per Pcs.
UNS N06601 INCONEL 601 PIPE FITTING -1.500 IN, CAP-BUTTWELD : INR 5,562/- Per Kg
INCONEL 601 PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD: INR 7,727/- Per Pcs.

Check complete price list here

Inconel 601 Pipe Fittings are a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This Inconel 601 Butt Weld Fittings stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Inconel 601 Buttweld Fittings develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This Alloy 601 Pipe Fittings have good high temperature strength, and retains its ductility after long service exposure.

UNS N06601 Pipe Fittings also have good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601 Buttweld Pipe Fittings’ properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, Inconel 601 Pipe Fitting is not suggested for use in strongly reducing, sulfur bearing environments.

Alloy 601 Pipe Fittings are just one of the specialty steels available at our premise. These UNS N06601 Pipe Fittings are available in a various forms such as Inconel 601 End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, AWS 011 Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Inconel 601 Pipe Fittings, Inconel 601 weld fittings, Inconel 601 Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Inconel 601 material. All Inconel 601 elbows are mandrel formed to insure consistency. All our Inconel 601 Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Inconel 601 Pipe Fittings Trade Name

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Get Free Quote

Inconel 601 Pipe Fittings supplier, Inconel 601 Buttweld Fittings Supplier

Inconel 601 Pipe Fittings supplier, Inconel 601 Buttweld Fittings Supplier (Original Factory Photo)

Inconel 601 24" Long Radius Elbow | Inconel 601 24" Equal Tee SCH XXS | Inconel 601 10" SCH 160 Short Radius Bends | Inconel 601 24" Concentric Reducer SCH 80S | Inconel 601 Unequal Tee 16" x 12" SCH 160 | Inconel 601 Seamless Pipe Fittings | Inconel 601 100% X-Ray Welded Pipe Fittings | Inconel 601 ANSI B16.9 Fittings | Seamless Reducing Tee, Inconel 601

Types of Inconel 601 Buttweld Fittings

Inconel 601 Pipe Fittings Specifications

Inconel 601 Pipe Fittings are stocked in the following range of materials and sizes

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 UNS N06601
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Inconel 601 Seamless Butt Weld Fittings: 1/2″ – 10″
Inconel 601 Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Inconel 601 Pipe Fittings in form of :
  • ASTM B366 Inconel 601 Equal Tee manufacturer
  • ASTM B366 Inconel 601 Nipple manufacturer in Mumbai
  • ASTM B366 Inconel 601 Long Radius Elbow manufacturer India
  • ASTM B366 Inconel 601 Reducing Tee manufacturer Maharashtra
  • ASTM B366 Inconel 601 Elbows manufacturer in Mumbai
  • ASTM B366 Inconel 601 Swage Nipple manufacturer in India
  • ASTM B366 Inconel 601 Short Radius Elbow suppliers in India
  • ASTM B366 Inconel 601 Reducer manufacturer in India
  • Exporter of ASTM B366 Inconel 601 Pipe Cap in India
  • ASTM B366 Inconel 601 Barrel Nipple manufacturer in India
  • ASTM B366 Inconel 601 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Inconel 601 Concentric Reducer manufacturer in India
  • ASTM B366 Inconel 601 Reducing Nipple suppliers in Mumbai
  • ASTM B366 Inconel 601 45 Deg Elbows manufacturer in India
  • ASTM B366 Inconel 601 Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Inconel 601 Saddles manufacturer in India
  • ASTM B366 Inconel 601 Weld Rings suppliers in Mumbai
  • ASTM B366 Inconel 601 180 Deg Elbow wholesaler in India
  • ASTM B366 Inconel 601 End Cap importers in India
  • ASTM B366 Inconel 601 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 601 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Inconel 601 Stubend manufacturer in India
  • Manufacturer of ASTM B366 Inconel 601 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Inconel 601 Piggable Bend manufacturer in India
  • Trader of ASTM B366 Inconel 601 Long Stubend manufacturer in India
  • Stockist of ASTM B366 Inconel 601 Tee manufacturer in India
  • Stockholder of ASTM B366 Inconel 601 Short Stubend Suppliers in India
  • ASTM B366 Inconel 601 Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 601 Bend manufacturer in Mumbai, India
  • ASTM B366 Inconel 601 Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Inconel 601 Weldolets manufacturer in Mumbai, India
  • ASTM B366 Inconel 601 Return Bends manufacturer in Mumbai
  • ASTM B366 Inconel 601 Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Inconel 601 Long Bend with Radius – R = 3D, 5D & 10D
Inconel 601 Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Inconel 601 Long radius Bend, Inconel 601 Piggable Bend, Inconel 601 Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Inconel 601 Pipe Fittings manufacturer in India
SABIC Approved Inconel 601 Pipe Fittings supplier in India

Inconel 601 Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Inconel 601 B/W Fittings Manufacturer in India, ANSI B16.11 Inconel 601 Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Inconel 601 Pipe Fittings Make, Exporters & Stockist for

Top Inconel 601 Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Inconel 601 Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Inconel 601 Pipe Fittings

  • ASTM B366 Inconel 601 Equal Cross manufacturer in India
  • Inconel 601 Reducing Cross manufacturer
  • Inconel 601 90°/180°/45° Long Radius Elbow manufacturer
  • Inconel 601 90°/180°/45° Short Radius Elbow manufacturer
  • Inconel 601 End Cap manufacturer in India
  • Inconel 601 Pipe Cap manufacturer
  • Inconel 601 Lap Joint Stub Ends manufacturer
  • Inconel 601 Reducing Tee manufacturer in India
  • ASTM B366 Inconel 601 Collar suppliers in India
  • Inconel 601 Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 601 Piggable Bend suppliers in India
  • Inconel 601 45° Long Radius Elbow
  • Inconel 601 45° Short Radius Elbow manufacturer in India
  • Inconel 601 180° Short Radius Elbow
  • Inconel 601 Pipe Bends suppliers in India
  • Inconel 601 Reducing Elbow manufacturer in India
  • Inconel 601 Cross Fitting manufacturer in Mumbai, Maharashtra
  • Inconel 601 Reducing Cross Fitting suppliers in India
  • Inconel 601 SR Return Bend manufacturer in India
  • Inconel 601 Seamless Reducing Tee
  • Inconel 601 Couplings suppliers in India
  • Inconel 601 Forged Pipe Reducer
  • Inconel 601 Reducing Nipple manufacturer in India
  • ASTM B366 Inconel 601 Short Stubend manufacturer in Mumbai, Maharashtra
  • Inconel 601 1.5D Elbow suppliers in India
  • ASTM B366 Inconel 601 Outlet Tees and Crosses manufacturer in India
  • Inconel 601 Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Inconel 601 Eccentric Reducer
  • ASTM B366 Inconel 601 Reducer manufacturer in India
  • ASTM B366 Inconel 601 1D Elbow
  • Inconel 601 3D Elbow
  • Inconel 601 5D Elbow manufacturer in India
  • ASTM B366 Inconel 601 Lateral Tee suppliers in India
  • Inconel 601 End Caps
  • Inconel 601 Piggable Bends manufacturer in Mumbai, Maharashtra
  • Inconel 601 LR Return Bend manufacturer in India
  • Inconel 601 Threaded Elbow
  • Inconel 601 Seamless Fittings manufacturer in India
  • Inconel 601 Welded Pipe Fittings suppliers in India
  • ASTM B366 Inconel 601 Straight Tees
  • ASTM B366 Inconel 601 Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Inconel 601 180° Long Radius Elbow suppliers in India
  • Inconel 601 Forged/Plate Cut Rings
  • Inconel 601 Fabricated Pipe Fittings exporters in India
  • Inconel 601 Swedge Nipple manufacturer in India
  • Inconel 601 Pipe Nipple manufacturer in India
  • Inconel 601 Long Stubend suppliers in India

Inconel 601 90° Elbow manufacturer in India

Inconel 601 90 degree pipe elbow manufacturerInconel 601 90 degree pipe elbow suppliers, Inconel 601 Elbows

Inconel 601 90 degree elbow is a type of Inconel 601 Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Inconel 601 90 Bend” or “Alloy 601 Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Inconel 601 90° Elbows are made of Inconel 601 seamless tubes within the diameter range of DN 15 – DN 1000.

Inconel 601 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Inconel 601 Elbows other trade name: Inconel Alloy 601 Elbow, ASTM B366 UNS N06601 Elbow, Alloy 601 Elbow, Inconel 601 Pipe Elbow, UNS N06601 Elbow

Inconel 601 Elbow 45° manufacturer in India

Inconel 601 45 Degree Elbows manufacturerInconel 601 45 Degree Elbows suppliers

Inconel 601 45 degree elbow is the Inconel 601 elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Inconel 601 45° Elbows are made of Inconel 601 Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Inconel 601 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Inconel 601 butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Inconel 601 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Inconel 601 butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Inconel 601 180° Returns manufacturer in India

Inconel 601 180° Returns manufacturerInconel 601 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Inconel 601 Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Inconel 601 long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Inconel 601 180° Long Radius Return
  • ASTM B366 Inconel 601 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Reducing Tee manufacturer in India, Inconel 601 Reducing Pipe Tee manufacturer

Inconel 601 Reducing Tee manufacturerInconel 601 Reducing Tee suppliers, Inconel 601 Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Inconel 601 straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Inconel 601 reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Inconel 601 Stright Tee
  • ASTM B366 Inconel 601 Reducing Tee

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Tee manufacturer in India, Inconel 601 Equal Tee Manufacturer

Inconel 601 Tee manufacturerInconel 601 Pipe Tee suppliers

Our Inconel 601 butt weld pipe tees include Inconel 601 butt weld straight tees and Inconel 601 butt weld reducing tees. Inconel 601 tees are available within the range of DN 15 – DN 600. Our Inconel 601 butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Inconel 601 straight pipe tee. Inconel 601 Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Inconel 601 Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Inconel 601 reducing tee can connect various sizes of pipes together in one pipe system.

Inconel 601 Concentric Reducers manufacturer in India, Inconel 601 Reducer Manufacturer

Inconel 601 Concentric Reducers manufacturerInconel 601 Pipe Reducer/ Reducers suppliers

Looking for Inconel 601 Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Inconel 601 pipe reducer: Inconel 601 concentric reducer and Inconel 601 eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Inconel 601 reducers are made of Inconel 601 seamless tube within the range of DN 15 – DN 1000.

Inconel 601 butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Inconel 601 eccentric butt welding reducer is a type of Inconel 601 pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Inconel 601 concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Inconel 601 eccentric reducers have a parallel edge, which results in an offsetting center. Inconel 601 Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Eccentric Reducers manufacturer in India

Inconel 601 Eccentric Reducers manufacturerInconel 601 Eccentric Pipe Reducer/ Reducers suppliers

Looking for Inconel 601 Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

 

 

Inconel 601 Long Radius LR Elbows manufacturer in India, Inconel 601 LR Elbows manufacturer

Inconel 601 LR Elbows manufacturerInconel 601 Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Inconel 601 long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Inconel 601 Short radius elbows have a center-to-end measurement equl to pipe diameter.

Inconel 601 long radius elbow costs less than a short radius fittings. Inconel 601 Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Inconel 601 45° Long Radius Elbow
  • ASTM B366 Inconel 601 90° Long Radius Elbow
  • ASTM B366 Inconel 601 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Short Radius SR Elbows manufacturer in India, Inconel 601 SR Elbows manufacturer

Inconel 601 Short Radius Elbows manufacturerInconel 601 Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Inconel 601 short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Inconel 601 short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Inconel 601 45° Short Radius Elbow
  • ASTM B366 Inconel 601 90° Short Radius Elbow
  • ASTM B366 Inconel 601 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Pipe Cap Supplier, Inconel 601 End Cap manufacturer

Inconel 601 Pipe Cap manufacturerInconel 601 Pipe Cap/ End Cap suppliers

Inconel 601 Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Inconel 601 butt weld caps come in various sizes and schedules to fit your Inconel 601 pipe and fitting needs.

Inconel 601 butt weld cap is a type of Inconel 601 Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Inconel 601 End Caps: cap, Seamless cap, Steel cap, Inconel 601 Seamless cap, pipe cap, cap end

  • ASTM B366 Inconel 601 Seamless cap
  • ASTM B366 Inconel 601 Erw cap
  • ASTM B366 Inconel 601 Large size cap
  • ASTM B366 Inconel 601 Small size cap

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Stub End manufacturer in India, Inconel 601 Stub Ends manufacturer

Inconel 601 Stub End manufacturers in IndiaInconel 601 Stub End suppliers

These Inconel 601 Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Inconel 601 stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Inconel 601 Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Inconel 601 Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Inconel 601 Cross manufacturer in India, Inconel 601 Pipe Cross manufacturer

Inconel 601 Cross manufacturers in IndiaInconel 601 Pipe Cross suppliers

We can supply Inconel 601 pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Inconel 601 cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Inconel 601 Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Inconel 601 Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Inconel 601 UNS N06601

Hot Offer on Inconel 601 Pipe Fittings in 2017-18

We are have a wide size range of Inconel 601 Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Inconel 601 Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Inconel 601 Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Inconel 601 Pipe Fittings buyers

Inconel 601 Pipe Fittings Chemical Composition

ASTM B366 Inconel 601 Buttweld Fittings Chemical Properties

Ni Cr Al C Mn S Si Cu Fe
MIN 58.000 21.000 1.000 Bal
MAX 63.000 25.000 1.700 0.100 1.000 0.015 0.500 1.000

Inconel 601 Pipe Fittings Mechanical Properties

ASTM B366 Mechanical Properties of Inconel 601 Buttweld Fittings

Yield Strength 
0.2% Proof 
(MPa)
Tensile strength 
(MPa)
Elongation 
(% in 50mm)
Hardness 
(HB)
MIN 205 550 30.00  
MAX       220

Physical Properties of ASTM B366 Inconel 601 Pipe Fittings

Density lb/in³ 0.293
Mg/m³ 8.11
Specific Heat 70°F, Btu/lb-°F 0.107
21°C, J/kg-°C 448
Melting Range °F 2480-2571
°C 1360-1411
Curie Temperature °F <-320
°C <-196
Permeability 200 oersted (15.9 kA/m)  
76°F (24°C) 1.003
  -109°F (-78°C) 1.004
  -320°F (-196°C) 1.016

Inconel 601 Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
FCC REVAMP PROJECT, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
TAR 2013, NETHERLANDS Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling
PROGETTO MAM, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
SURINAME PROJECT, SURINAME Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
TAR 2012, NETHERLANDS Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
LIBONDO PROJECT, CONGO Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
PROGRAM 10+, POLAND Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Inconel 601 Pipe fittings in form of Inconel 601 Long Radius Elbow, Inconel 601 Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Inconel 601 Pipe fittings in form of ASTM B366 Inconel 601 Long Radius Return Bend, ASTM B366 Inconel 601 Short Radius Return Bend, ASTM B366 Inconel 601 Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Inconel 601 Pipe fittings in form of Inconel 601 End Cap, Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
MORON AMMONIA, VENEZUELA Inconel 601 Pipe fittings in form of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Pipe Cross, Inconel 601 Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Inconel 601 Pipe fittings in form of Inconel 601 Cross, Inconel 601 Concentric Reducer
ARO KUWAIT EPC, KUWAIT Inconel 601 Pipe fittings in form of Inconel 601 Eccentric Reducer, Inconel 601 pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Inconel 601 Pipe fittings in form of Inconel 601 Pipe Coupling, Inconel 601 Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Inconel 601 Buttweld fittings in form of Inconel 601 End Cap, Inconel 601 Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Stub Ends, Inconel 601 Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Inconel 601 Buttweld fittings, UNS N06601 Buttweld Fittings in form of Inconel 601 Buttweld fittings in forms of Inconel 601 Equal Tee, Inconel 601 Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Concentric Reducer, Inconel 601 Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Inconel 601 Buttweld fittings, UNS N06601 Pipe Fittings in form of Inconel 601 Collar, Inconel 601 Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Inconel 601 Buttweld fittings in form of Inconel 601 Short Radius Elbow, Inconel 601 Return Bend, Elbow, Inconel 601 Coupling

 

Inconel 601 Pipe Fittings Ready Stock

Products Size
Inconel 601 Elbows Long Radius Inconel 601 Stub Ends

Sizes 1/2″-48″

Inconel 601 Elbows Short Radius Inconel 601 Crosses
Inconel 601 Reducing Elbows Inconel 601 Reducing Crosses
Inconel 601 45° Elbows Inconel 601 180° LR Return Bends
Inconel 601 Tees Inconel 601 180° SR Return Bends
Inconel 601 Tees Inconel 601 Pipe Bends / Piggable Bends
Inconel 601 Reducers Inconel 601 Couplings
Inconel 601 Concentric Reducers Inconel 601 Pipe Nipples
Inconel 601 Eccentric Reducers Inconel 601 Forged/Plate Cut Rings
Inconel 601 3D Elbow Inconel 601 End Caps
Inconel 601 5D Elbow Inconel 601 Forged / Plate Circles


 

Inconel 601 Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Inconel 601 Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Inconel 601 Pipe Fittings dimensions, Inconel 601 Pipe Fittings dimension chart

INCONEL 601 ELBOWS 90° LONG RADIUS SCHEDULE XS

NPS LBS KG
1/2 0.25 0.11
3/4 0.25 0.11
1 0.5 0.23
0.9 0.41
1.15 0.52
2 2.2 1
4 1.81
3 6.5 2.95
8.35 3.79
4 13.5 6.12
5 22 9.98
6 35 15.88
8 71 32.21
10 107 48.53
12 160 72.57
14 205 92.99
16 276 125.19
18 340 154.22
20 420 190.51
22 520 235.87
24 600 272.16
26 729 330.67
30 975 442.25
36 1412 640.47
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Inconel 601 Fittings, Inconel 601 Pipe Fittings supplier in India, Inconel 601 Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Inconel 601 Pipe Fittings, Trader of Inconel 601 Buttweld Fittings in India, Distributor of Inconel 601 Butt Weld Fittings Dubai, Stockist of Inconel 601 Buttweld Pipe Fittings, Inconel 601 Elbows exporters in India, UNS N06601 Buttweld Fittings, Alloy 601 Pipe Fittings traders in India, UNS N06601 Elbow suppliers in India, Inconel 601 Cap, Pipe Fittings available in Inconel 601 Material, Inconel 601 Weld Fittings Stock, Source for ASME SB 366 Inconel 601 Pipe Fittings, Inconel 601 Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Inconel 601.