Inconel Pipe Fittings Supplier

Inconel Buttweld Fittings distributorInconel Pipe Fittings supplier, Inconel Weld Fittings stock, Inconel Buttweld Fittings distributor in India, Inconel Pipe Fittings exporter, Inconel Elbow, Inconel Tee, Inconel Reducer

ASTM B366 Inconel Fittings, Inconel Alloy Pipe Fittings supplier, Incoloy Buttweld Pipe Fittings dealers, Inconel Stub End, ASME SB 366 Fittings

ASME SB 366 Inconel Pipe Fittings supplier, B366 Inconel Buttweld Pipe Fittings supplier in India, Incoloy Pipe Fittings, Inconel Alloy Weld Fittings suppliers in India, Inconel Inconel Alloy Fittings exporters in India, European Inconel Alloy Pipe Fitting, Inconel Butt Weld Pipe Fittings supplier

Buy from Inconel Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Inconel Butt weld Pipe Fittings. Offer Best Price for Incoloy Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Inconel Reducer, ASTM B366 Inconel Buttweld Fittings in Mumbai, India, Incoloy Alloy Buttweld Fitting traders in India, Inconel Elbow Dealer in India. Supplier of Inconel Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Inconel Butt weld Pipe Fitting, Inconel ASTM B366 Incoloy Fittings stockholder in India, ASME SB366M Inconel Stub End wholesaler in India, manufacturer of Incoloy Welded Fittings, B366 Inconel Commercial Pipe Fittings manufacturer, Inconel Inconel Alloy Seamless Pipe Fittings Traders in India, Stockholder of Inconel DIN 2.4856 Tee, Incoloy Industrial Pipe Fittings, Inconel Pipe Elbow, Inconel Cap, Inconel Pipe Bends manufacturer in Rajkot, Gujarat, Inconel Tube Fittings Manufacturer

Contact Inconel Buttweld Fittings distributor, Inconel Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 Incoloy Pipe Fittings Price in India

Export Price List of ASTM B366 Incoloy| ASTM B366 Inconel Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Inconel Butt Weld Elbow

ASTM B366 Inconel BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE: INR 2,422/- Per Pcs.
Incoloy PIPE FITTING -1.500 IN, CAP-BUTTWELD : INR 5,562/- Per Kg
Inconel PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD: INR 7,727/- Per Pcs.

Check complete price list here

Inconel® is a registered trademark (of Special Metals Corporation) referring to a family of austenitic nickel-chromium super alloys. Inconel Pipe Fitting and Inconel Buttweld Pipe Fittings are typically used in applications where high temperatures are present due to a thick, stable passivating oxide layer which is formed when Inconel is heated. This layer protects the Inconel Butt Weld Fittings‘ surface making it resistant to heat. In addition to heat, Inconel Buttweld Fittings has a high resistance to corrosion, pressure and oxidation. Inconel Alloy Pipe Fittings also have excellent mechanical properties and are frequently used in the chemical and aerospace industries.

Inconel Alloy Pipe Fittings are just one of the specialty steels available at our premise. These Inconel Pipe Fittings are available in a various forms such as Inconel End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Inconel Pipe Fittings, Inconel weld fittings, Inconel Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Inconel material. All Inconel elbows are mandrel formed to insure consistency. All our Inconel Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Inconel Pipe Fittings Trade Name

Click on below to check the relevant information, Price List & offers:

Trade Name
UNS #
Nickel Alloy Butweld Fittings
Inconel® 600

N06600

B/SB366 Grade WPNCI

Inconel® 625

N06625

B/SB366 Grade WPNCMC

Incoloy® 800

N08800

B/SB366 Grade WPNIC

Incoloy® 800H

N08810

B/SB366 Grade WPNIC10

Incoloy® 800HT

N08811

B/SB366 Grade WPNIC11

Incoloy® 825

N08825

B/SB366 Grade WPNICMC

Get Free Quote

Inconel Pipe Fittings supplier, Inconel Buttweld Fittings Supplier

Inconel Pipe Fittings supplier, Inconel Buttweld Fittings Supplier (Original Factory Photo)

Inconel 24" Long Radius Elbow | Inconel 24" Equal Tee SCH XXS | Inconel 10" SCH 160 Short Radius Bends | Inconel 24" Concentric Reducer SCH 80S | Inconel Unequal Tee 16" x 12" SCH 160 | Inconel Seamless Pipe Fittings | Inconel 100% X-Ray Welded Pipe Fittings | Inconel ANSI B16.9 Fittings | Seamless Reducing Tee, Inconel

Types of Inconel Buttweld Fittings

Inconel Pipe Fittings Specifications

Inconel Pipe Fittings are stocked in the following range of materials and sizes

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb
Inconel 728 2.4668 N07718

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816 Incoloy
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Inconel Seamless Butt Weld Fittings: 1/2″ – 10″
Inconel Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Inconel Pipe Fittings in form of :
  • ASTM B366 Inconel Equal Tee manufacturer
  • ASTM B366 Inconel Nipple manufacturer in Mumbai
  • ASTM B366 Inconel Long Radius Elbow manufacturer India
  • ASTM B366 Inconel Reducing Tee manufacturer Maharashtra
  • ASTM B366 Inconel Elbows manufacturer in Mumbai
  • ASTM B366 Inconel Swage Nipple manufacturer in India
  • ASTM B366 Inconel Short Radius Elbow suppliers in India
  • ASTM B366 Inconel Reducer manufacturer in India
  • Exporter of ASTM B366 Inconel Pipe Cap in India
  • ASTM B366 Inconel Barrel Nipple manufacturer in India
  • ASTM B366 Inconel 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Inconel Concentric Reducer manufacturer in India
  • ASTM B366 Inconel Reducing Nipple suppliers in Mumbai
  • ASTM B366 Inconel 45 Deg Elbows manufacturer in India
  • ASTM B366 Inconel Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Inconel Saddles manufacturer in India
  • ASTM B366 Inconel Weld Rings suppliers in Mumbai
  • ASTM B366 Inconel 180 Deg Elbow wholesaler in India
  • ASTM B366 Inconel End Cap importers in India
  • ASTM B366 Inconel 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Inconel Stubend manufacturer in India
  • Manufacturer of ASTM B366 Inconel 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Inconel Piggable Bend manufacturer in India
  • Trader of ASTM B366 Inconel Long Stubend manufacturer in India
  • Stockist of ASTM B366 Inconel Tee manufacturer in India
  • Stockholder of ASTM B366 Inconel Short Stubend Suppliers in India
  • ASTM B366 Inconel Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel Bend manufacturer in Mumbai, India
  • ASTM B366 Inconel Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Inconel Weldolets manufacturer in Mumbai, India
  • ASTM B366 Inconel Return Bends manufacturer in Mumbai
  • ASTM B366 Inconel Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Inconel Long Bend with Radius – R = 3D, 5D & 10D
Inconel Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Inconel Long radius Bend, Inconel Piggable Bend, Inconel Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Inconel Pipe Fittings manufacturer in India
SABIC Approved Inconel Pipe Fittings supplier in India

Inconel Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Inconel B/W Fittings Manufacturer in India, ANSI B16.11 Inconel Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Inconel Pipe Fittings Make, Exporters & Stockist for

Top Inconel Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Inconel Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Inconel Pipe Fittings

  • ASTM B366 Inconel Equal Cross manufacturer in India
  • Inconel Reducing Cross manufacturer
  • Inconel 90°/180°/45° Long Radius Elbow manufacturer
  • Inconel 90°/180°/45° Short Radius Elbow manufacturer
  • Inconel End Cap manufacturer in India
  • Inconel Pipe Cap manufacturer
  • Inconel Lap Joint Stub Ends manufacturer
  • Inconel Reducing Tee manufacturer in India
  • ASTM B366 Inconel Collar suppliers in India
  • Inconel Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Inconel Piggable Bend suppliers in India
  • Inconel 45° Long Radius Elbow
  • Inconel 45° Short Radius Elbow manufacturer in India
  • Inconel 180° Short Radius Elbow
  • Inconel Pipe Bends suppliers in India
  • Inconel Reducing Elbow manufacturer in India
  • Inconel Cross Fitting manufacturer in Mumbai, Maharashtra
  • Inconel Reducing Cross Fitting suppliers in India
  • Inconel SR Return Bend manufacturer in India
  • Inconel Seamless Reducing Tee
  • Inconel Couplings suppliers in India
  • Inconel Forged Pipe Reducer
  • Inconel Reducing Nipple manufacturer in India
  • ASTM B366 Inconel Short Stubend manufacturer in Mumbai, Maharashtra
  • Inconel 1.5D Elbow suppliers in India
  • ASTM B366 Inconel Outlet Tees and Crosses manufacturer in India
  • Inconel Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Inconel Eccentric Reducer
  • ASTM B366 Inconel Reducer manufacturer in India
  • ASTM B366 Inconel 1D Elbow
  • Inconel 3D Elbow
  • Inconel 5D Elbow manufacturer in India
  • ASTM B366 Inconel Lateral Tee suppliers in India
  • Inconel End Caps
  • Inconel Piggable Bends manufacturer in Mumbai, Maharashtra
  • Inconel LR Return Bend manufacturer in India
  • Inconel Threaded Elbow
  • Inconel Seamless Fittings manufacturer in India
  • Inconel Welded Pipe Fittings suppliers in India
  • ASTM B366 Inconel Straight Tees
  • ASTM B366 Inconel Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Inconel 180° Long Radius Elbow suppliers in India
  • Inconel Forged/Plate Cut Rings
  • Inconel Fabricated Pipe Fittings exporters in India
  • Inconel Swedge Nipple manufacturer in India
  • Inconel Pipe Nipple manufacturer in India
  • Inconel Long Stubend suppliers in India

Inconel 90° Elbow manufacturer in India

Inconel 90 degree pipe elbow manufacturerInconel 90 degree pipe elbow suppliers, Inconel Elbows

Inconel 90 degree elbow is a type of Inconel Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Inconel 90 Bend” or “Inconel Alloy Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Inconel 90° Elbows are made of Inconel seamless tubes within the diameter range of DN 15 – DN 1000.

Inconel 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Inconel Elbows other trade name: Inconel Inconel Alloy Elbow, ASTM B366 Incoloy Elbow, Inconel Alloy Elbow, Inconel Pipe Elbow, Incoloy Elbow

Inconel Elbow 45° manufacturer in India

Inconel 45 Degree Elbows manufacturerInconel 45 Degree Elbows suppliers

Inconel 45 degree elbow is the Inconel elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Inconel 45° Elbows are made of Inconel Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Inconel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Inconel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Inconel 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Inconel butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Inconel 180° Returns manufacturer in India

Inconel 180° Returns manufacturerInconel 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Inconel Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Inconel long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Inconel 180° Long Radius Return
  • ASTM B366 Inconel 180° Short Radius Return

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Reducing Tee manufacturer in India, Inconel Reducing Pipe Tee manufacturer

Inconel Reducing Tee manufacturerInconel Reducing Tee suppliers, Inconel Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Inconel straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Inconel reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Inconel Stright Tee
  • ASTM B366 Inconel Reducing Tee

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Tee manufacturer in India, Inconel Equal Tee Manufacturer

Inconel Tee manufacturerInconel Pipe Tee suppliers

Our Inconel butt weld pipe tees include Inconel butt weld straight tees and Inconel butt weld reducing tees. Inconel tees are available within the range of DN 15 – DN 600. Our Inconel butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Inconel straight pipe tee. Inconel Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Inconel Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Inconel reducing tee can connect various sizes of pipes together in one pipe system.

Inconel Concentric Reducers manufacturer in India, Inconel Reducer Manufacturer

Inconel Concentric Reducers manufacturerInconel Pipe Reducer/ Reducers suppliers

Looking for Inconel Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Inconel pipe reducer: Inconel concentric reducer and Inconel eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Inconel reducers are made of Inconel seamless tube within the range of DN 15 – DN 1000.

Inconel butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Inconel eccentric butt welding reducer is a type of Inconel pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Inconel concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Inconel eccentric reducers have a parallel edge, which results in an offsetting center. Inconel Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Eccentric Reducers manufacturer in India

Inconel Eccentric Reducers manufacturerInconel Eccentric Pipe Reducer/ Reducers suppliers

Looking for Inconel Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Incoloy

 

 

Inconel Long Radius LR Elbows manufacturer in India, Inconel LR Elbows manufacturer

Inconel LR Elbows manufacturerInconel Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Inconel long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Inconel Short radius elbows have a center-to-end measurement equl to pipe diameter.

Inconel long radius elbow costs less than a short radius fittings. Inconel Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Inconel 45° Long Radius Elbow
  • ASTM B366 Inconel 90° Long Radius Elbow
  • ASTM B366 Inconel 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Short Radius SR Elbows manufacturer in India, Inconel SR Elbows manufacturer

Inconel Short Radius Elbows manufacturerInconel Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Inconel short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Inconel short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Inconel 45° Short Radius Elbow
  • ASTM B366 Inconel 90° Short Radius Elbow
  • ASTM B366 Inconel 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Pipe Cap Supplier, Inconel End Cap manufacturer

Inconel Pipe Cap manufacturerInconel Pipe Cap/ End Cap suppliers

Inconel Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Inconel butt weld caps come in various sizes and schedules to fit your Inconel pipe and fitting needs.

Inconel butt weld cap is a type of Inconel Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Inconel End Caps: cap, Seamless cap, Steel cap, Inconel Seamless cap, pipe cap, cap end

  • ASTM B366 Inconel Seamless cap
  • ASTM B366 Inconel Erw cap
  • ASTM B366 Inconel Large size cap
  • ASTM B366 Inconel Small size cap

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Stub End manufacturer in India, Inconel Stub Ends manufacturer

Inconel Stub End manufacturers in IndiaInconel Stub End suppliers

These Inconel Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Inconel stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Inconel Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Inconel Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Incoloy

Inconel Cross manufacturer in India, Inconel Pipe Cross manufacturer

Inconel Cross manufacturers in IndiaInconel Pipe Cross suppliers

We can supply Inconel pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Inconel cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Inconel Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Inconel Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Incoloy

Hot Offer on Inconel Pipe Fittings in 2017-18

We are have a wide size range of Inconel Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Inconel Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Inconel Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Inconel Pipe Fittings buyers

Inconel Pipe Fittings Chemical Composition

ASTM B366 Inconel Buttweld Fittings Chemical Properties

Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00
Inconel 601 0.10 max 1.0 max 0.5 max 0.015 max 1.0 max Balance 58.0 – 63.0 21.0 – 25.0
Inconel 625 0.10 max 0.50 max 0.50 max 0.015 max 5.0 max 58.0 min 20.0 – 23.0
Inconel 718 0.08 max 0.35 max 0.35 max 0.015 max 0.30 max 50.00 – 55.00 17.00 – 21.00

Inconel Pipe Fittings Mechanical Properties

ASTM B366 Mechanical & Physical Properties of Inconel Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
Inconel 625 8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %
Inconel 718 8.2 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %

Inconel Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
FCC REVAMP PROJECT, ITALY Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
TAR 2013, NETHERLANDS Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling
PROGETTO MAM, ITALY Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
SURINAME PROJECT, SURINAME Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
TAR 2012, NETHERLANDS Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
LIBONDO PROJECT, CONGO Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
PROGRAM 10+, POLAND Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Inconel Pipe fittings in form of Inconel Long Radius Elbow, Inconel Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Inconel Pipe fittings in form of ASTM B366 Inconel Long Radius Return Bend, ASTM B366 Inconel Short Radius Return Bend, ASTM B366 Inconel Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Inconel Pipe fittings in form of Inconel End Cap, Inconel Stub Ends, Inconel Pipe Nipple
MORON AMMONIA, VENEZUELA Inconel Pipe fittings in form of Inconel Equal Tee, Inconel Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Inconel Pipe fittings in form of Inconel Pipe Cross, Inconel Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Inconel Pipe fittings in form of Inconel Cross, Inconel Concentric Reducer
ARO KUWAIT EPC, KUWAIT Inconel Pipe fittings in form of Inconel Eccentric Reducer, Inconel pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Inconel Pipe fittings in form of Inconel Pipe Coupling, Inconel Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Inconel Buttweld fittings in form of Inconel End Cap, Inconel Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Inconel Buttweld fittings in form of Inconel Stub Ends, Inconel Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Inconel Buttweld fittings, Incoloy Buttweld Fittings in form of Inconel Buttweld fittings in forms of Inconel Equal Tee, Inconel Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Inconel Buttweld fittings in form of Inconel Concentric Reducer, Inconel Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Inconel Buttweld fittings, Incoloy Pipe Fittings in form of Inconel Collar, Inconel Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Inconel Buttweld fittings in form of Inconel Short Radius Elbow, Inconel Return Bend, Elbow, Inconel Coupling

 

Inconel Pipe Fittings Ready Stock

Products Size
Inconel Elbows Long Radius Inconel Stub Ends

Sizes 1/2″-48″

Inconel Elbows Short Radius Inconel Crosses
Inconel Reducing Elbows Inconel Reducing Crosses
Inconel 45° Elbows Inconel 180° LR Return Bends
Inconel Tees Inconel 180° SR Return Bends
Inconel Tees Inconel Pipe Bends / Piggable Bends
Inconel Reducers Inconel Couplings
Inconel Concentric Reducers Inconel Pipe Nipples
Inconel Eccentric Reducers Inconel Forged/Plate Cut Rings
Inconel 3D Elbow Inconel End Caps
Inconel 5D Elbow Inconel Forged / Plate Circles


 

Inconel Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Inconel Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Inconel Pipe Fittings dimensions, Inconel Pipe Fittings dimension chart

INCONEL ELBOWS 45° LONG RADIUS SCHEDULE STD

NPS LBS KG
1/2 0.09 0.04
3/4 0.09 0.04
1 0.25 0.11
0.38 0.17
0.4 0.18
2 0.81 0.37
1.75 0.79
3 2.63 1.19
3.5 1.59
4 4.5 2.04
5 7.5 3.4
6 12 5.44
8 23 10.43
10 43 19.5
12 62 28.12
14 80 36.29
16 100 45.36
18 126 57.15
20 160 72.57
22 197 89.36
24 238 107.95
26 275 124.74
30 367 166.47
36 531 240.86
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Inconel Fittings, Inconel Pipe Fittings supplier in India, Inconel Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Inconel Pipe Fittings, Trader of Inconel Buttweld Fittings in India, Distributor of Inconel Butt Weld Fittings Dubai, Stockist of Inconel Buttweld Pipe Fittings, Inconel Elbows exporters in India, Incoloy Buttweld Fittings, Inconel Alloy Pipe Fittings traders in India, Incoloy Elbow suppliers in India, Inconel Cap, Pipe Fittings available in Inconel Material, Inconel Weld Fittings Stock, Source for ASME SB 366 Inconel Pipe Fittings, Inconel Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Inconel .