Monel Pipe Fittings Supplier

Monel Buttweld Fittings distributorMonel Pipe Fittings supplier, Monel Weld Fittings stock, Monel Buttweld Fittings distributor in India, Monel Pipe Fittings exporter, Monel Elbow, Monel Tee, Monel Reducer

Monel Alloy Pipe Fittings supplier, Monel Buttweld Pipe Fittings dealers, Monel Stub End

ASME SB 366 Monel Pipe Fittings supplier, B366 Monel Buttweld Pipe Fittings supplier in India, Monel Pipe Fittings, Monel Alloy Weld Fittings suppliers in India, Monel Alloy Fittings exporters in India, European Alloy Pipe Fitting, Monel Butt Weld Pipe Fittings supplier

Buy from Monel Pipe Fittings Stockist in Mumbai, India, Saudi Aramco approved Monel Butt weld Pipe Fittings. Offer Best Price for Monel Alloy Buttweld Pipe Fittings, SABIC Approved DIN 2.4816 Buttweld Pipe Fittings, ANSI B16.9 Monel Reducer, ASTM B366 Monel Buttweld Fittings in Mumbai, India, Monel Alloy Buttweld Fitting traders in India, Monel Elbow Dealer in India. Supplier of Monel Butt weld Pipe Fittings, ANSI B16.9, ANSI B16.28, MSS SP-43, MSS SP-79 Monel Butt weld Pipe Fitting, Monel ASTM B366 Monel Fittings stockholder in India, ASME SB366M Monel Stub End wholesaler in India, manufacturer of Monel Welded Fittings, B366 Monel Commercial Pipe Fittings manufacturer, Monel Alloy Seamless Pipe Fittings Traders in India, Stockholder of Monel DIN 2.4360 Tee, Monel Industrial Pipe Fittings, Monel Pipe Elbow, Monel Cap, Monel Pipe Bends manufacturer in Rajkot, Gujarat, Monel Tube Fittings Manufacturer

Contact Monel Buttweld Fittings distributor, Monel Butt weld Fittings exporter in India, MSS SP43 Seamless and Welded Butt Weld Fittings | Call: +91-22-67521137 Send Mail: info@vishalsteel.com

Check ASTM B366 Monel Pipe Fittings Price in India

Export Price List of ASTM B366 Monel Buttweld Pipe Fittings Price List

Price of ASTM B366 Buttweld Fittings, Monel Butt Weld Elbow

ASTM B366 Monel BUTTWELD PIPE FITTING – 0.5 ELBOW -90 DEGREE PRICE: INR 2,422/- Per Pcs.
Monel PIPE FITTING -1.500 IN, CAP-BUTTWELD PRICE: INR 5,562/- Per Kg
Monel PIPE FITTING- 2 x 1.5 REDUCER – ECCENTRIC, BUTTWELD PRICE: INR 7,727/- Per Pcs.

Check complete price list here

The registered trademark name, Monel, is applied as the prefix name to several corrosion resistant alloys produced by Special Metals Corporation. Monel Pipe Fittings are nickel-based and exhibit traits that include high resistance to atmospheric corrosion, salt water, and various acid and alkaline solutions.

Monel Butt Weld Fittings of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Monel® brand alloys. Monel Buttweld Fittings are a corrosion-resistant alloy is widely used in the marine, oil and chemical processing industries. Monel Buttweld Pipe Fittings are mostly used for good resistance to acids such as hydrofluoric and sulfuric acid. Monel Alloy Pipe Fittings are stronger than steel grades.

These Monel Pipe Fitting are available in a various forms such as Monel End Cap, Stub Ends, Pipe Nipple, Equal Tee, Unequal Tee, Concentric Reducer, Eccentric Reducer, Collar, Long Radius Elbow, Short Radius Elbow, Return Bend, Elbow and Coupling etc.

Vishal Steel (India) manufactures an industry leading line of Monel Pipe Fittings, Monel weld fittings, Monel Buttweld Pipe Fittings– Elbows, Reducing Elbows, Tees, Reducing Tees, Concentric Reducers, Eccentric Reducers, Stub Ends, Crosses, Piggable Bends, and Caps in sizes from 1/2" to 48" in Monel material. All Monel elbows are mandrel formed to insure consistency. All our Monel Butt Weld Fittings are Norsok Ed4, BP, Saudi Aramco, SABIC and Shell approved.

Get Free Quote

Monel Pipe Fittings supplier, Monel Buttweld Fittings Supplier

Monel Pipe Fittings supplier, Monel Buttweld Fittings Supplier (Original Factory Photo)

Monel 24" Long Radius Elbow | Monel 24" Equal Tee SCH XXS | Monel 10" SCH 160 Short Radius Bends | Monel 24" Concentric Reducer SCH 80S | Monel Unequal Tee 16" x 12" SCH 160 | Monel Seamless Pipe Fittings | Monel 100% X-Ray Welded Pipe Fittings | Monel ANSI B16.9 Fittings | Seamless Reducing Tee, Monel

Types of Monel Buttweld Fittings

Monel Pipe Fittings Specifications

Monel Pipe Fittings are stocked in the following range of materials and sizes

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Monel Seamless Butt Weld Fittings: 1/2″ – 10″
Monel Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Get Free Quote

Note:-
Producing Monel Pipe Fittings in form of :
  • ASTM B366 Monel Equal Tee manufacturer
  • ASTM B366 Monel Nipple manufacturer in Mumbai
  • ASTM B366 Monel Long Radius Elbow manufacturer India
  • ASTM B366 Monel Reducing Tee manufacturer Maharashtra
  • ASTM B366 Monel Elbows manufacturer in Mumbai
  • ASTM B366 Monel Swage Nipple manufacturer in India
  • ASTM B366 Monel Short Radius Elbow suppliers in India
  • ASTM B366 Monel Reducer manufacturer in India
  • Exporter of ASTM B366 Monel Pipe Cap in India
  • ASTM B366 Monel Barrel Nipple manufacturer in India
  • ASTM B366 Monel 90 Deg Elbow suppliers in Mumbai
  • ASTM B366 Monel Concentric Reducer manufacturer in India
  • ASTM B366 Monel Reducing Nipple suppliers in Mumbai
  • ASTM B366 Monel 45 Deg Elbows manufacturer in India
  • ASTM B366 Monel Eccentric Reducer suppliers in Mumbai
  • ASTM B366 Monel Saddles manufacturer in India
  • ASTM B366 Monel Weld Rings suppliers in Mumbai
  • ASTM B366 Monel 180 Deg Elbow wholesaler in India
  • ASTM B366 Monel End Cap importers in India
  • ASTM B366 Monel 1D Elbow manufacturer in Mumbai, Maharashtra
  • ASTM B366 Monel 3D Elbow manufacturer in Rajkot, Gujarat
  • Manufacturer of ASTM B366 Monel Stubend manufacturer in India
  • Manufacturer of ASTM B366 Monel 5D Elbow manufacturer in India
  • Distributor of ASTM B366 Monel Piggable Bend manufacturer in India
  • Trader of ASTM B366 Monel Long Stubend manufacturer in India
  • Stockist of ASTM B366 Monel Tee manufacturer in India
  • Stockholder of ASTM B366 Monel Short Stubend Suppliers in India
  • ASTM B366 Monel Long Radius Bend manufacturer in Mumbai, Maharashtra
  • ASTM B366 Monel Bend manufacturer in Mumbai, India
  • ASTM B366 Monel Unequal Tee manufacturer in Mumbai, India
  • ASTM B366 Monel Weldolets manufacturer in Mumbai, India
  • ASTM B366 Monel Return Bends manufacturer in Mumbai
  • ASTM B366 Monel Stub End Fittings manufacturer in Mumbai
Procure Raw Materials from Japanese Mills, European Mills, US Mills, Korean Mills
Specialize

Monel Long Bend with Radius – R = 3D, 5D & 10D
Monel Pigabble Bend & As per your drawing
Minimum Wall Thinning rate & Ovality, No Wrinkles

Monel Long radius Bend, Monel Piggable Bend, Monel Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend
Saudi Aramco approved Monel Pipe Fittings manufacturer in India
SABIC Approved Monel Pipe Fittings supplier in India

Monel Seamless/ Welded Pipe Fittings manufacturer in India 100% Radiography Tested
Monel B/W Fittings Manufacturer in India, ANSI B16.11 Monel Pipe Fittings Supplier
s in Mumbai
We Provide Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report & Third Party Inspection Report as per client specification.

Monel Pipe Fittings Make, Exporters & Stockist for

Top Monel Pipe Fittings supplier

  • MEGA, Italy
  • Benkan, Japan
  • JD Delcorte
  • Sung Kwang, Korea
  • Metalfar, Italy
  • TK, Korea
  • Europiping
  • BKL, UK
  • Tectubi, Italy
  • Erne, Austria
  • Bothwell, Taiwan
  • Melessi
  • Inco Ally, USA
  • Phoceene, Italy
  • & many more

 

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Application of Monel Pipe Fittings

  1. Oil & Gas Industry
  2. Nuclear Power/ Nuclear Plants
  3. Industrial Boilers
  4. Power Plants
  5. Condensers
  6. Refineries
  7. Ship Building
  8. Heat Exchangers
  9. Paper & Pulp
  10. Marine Applications
  11. Fossil Fuel Power Plants

Types of Monel Pipe Fittings

  • ASTM B366 Monel Equal Cross manufacturer in India
  • Monel Reducing Cross manufacturer
  • Monel 90°/180°/45° Long Radius Elbow manufacturer
  • Monel 90°/180°/45° Short Radius Elbow manufacturer
  • Monel End Cap manufacturer in India
  • Monel Pipe Cap manufacturer
  • Monel Lap Joint Stub Ends manufacturer
  • Monel Reducing Tee manufacturer in India
  • ASTM B366 Monel Collar suppliers in India
  • Monel Straight Crosses manufacturer in Mumbai, Maharashtra
  • ASTM B366 Monel Piggable Bend suppliers in India
  • Monel 45° Long Radius Elbow
  • Monel 45° Short Radius Elbow manufacturer in India
  • Monel 180° Short Radius Elbow
  • Monel Pipe Bends suppliers in India
  • Monel Reducing Elbow manufacturer in India
  • Monel Cross Fitting manufacturer in Mumbai, Maharashtra
  • Monel Reducing Cross Fitting suppliers in India
  • Monel SR Return Bend manufacturer in India
  • Monel Seamless Reducing Tee
  • Monel Couplings suppliers in India
  • Monel Forged Pipe Reducer
  • Monel Reducing Nipple manufacturer in India
  • ASTM B366 Monel Short Stubend manufacturer in Mumbai, Maharashtra
  • Monel 1.5D Elbow suppliers in India
  • ASTM B366 Monel Outlet Tees and Crosses manufacturer in India
  • Monel Concentric Reducer manufacturer in Mumbai, Maharashtra
  • Monel Eccentric Reducer
  • ASTM B366 Monel Reducer manufacturer in India
  • ASTM B366 Monel 1D Elbow
  • Monel 3D Elbow
  • Monel 5D Elbow manufacturer in India
  • ASTM B366 Monel Lateral Tee suppliers in India
  • Monel End Caps
  • Monel Piggable Bends manufacturer in Mumbai, Maharashtra
  • Monel LR Return Bend manufacturer in India
  • Monel Threaded Elbow
  • Monel Seamless Fittings manufacturer in India
  • Monel Welded Pipe Fittings suppliers in India
  • ASTM B366 Monel Straight Tees
  • ASTM B366 Monel Barrel Nipple manufacturer in Mumbai, Maharashtra
  • Monel 180° Long Radius Elbow suppliers in India
  • Monel Forged/Plate Cut Rings
  • Monel Fabricated Pipe Fittings exporters in India
  • Monel Swedge Nipple manufacturer in India
  • Monel Pipe Nipple manufacturer in India
  • Monel Long Stubend suppliers in India

Monel 90° Elbow manufacturer in India

Monel 90 degree pipe elbow manufacturerMonel 90 degree pipe elbow suppliers, Monel Elbows

Monel 90 degree elbow is a type of Monel Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Monel 90 Bend” or “Monel Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Monel 90° Elbows are made of Monel seamless tubes within the diameter range of DN 15 – DN 1000.

Monel 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Monel Elbows other trade name: Monel Alloy Elbow, ASTM B366 Monel Elbow, Monel Alloy Elbow, Monel Pipe Elbow

Monel Elbow 45° manufacturer in India

Monel 45 Degree Elbows manufacturerMonel 45 Degree Elbows suppliers

Monel 45 degree elbow is the Monel elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Monel 45° Elbows are made of Monel Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Monel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Monel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Monel 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Monel butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Monel 180° Returns manufacturer in India

Monel 180° Returns manufacturerMonel 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Monel Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Monel long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Monel 180° Long Radius Return
  • ASTM B366 Monel 180° Short Radius Return

Materials: ASTM B366/ ASME SB366

Monel Reducing Tee manufacturer in India, Monel Reducing Pipe Tee manufacturer

Monel Reducing Tee manufacturerMonel Reducing Tee suppliers, Monel Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Monel straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Monel reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Monel Stright Tee
  • ASTM B366 Monel Reducing Tee

Materials: ASTM B366/ ASME SB366 Monel

Monel Tee manufacturer in India, Monel Equal Tee Manufacturer

Monel Tee manufacturerMonel Pipe Tee suppliers

Our Monel butt weld pipe tees include Monel butt weld straight tees and Monel butt weld reducing tees. Monel tees are available within the range of DN 15 – DN 600. Our Monel butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Monel straight pipe tee. Monel Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Monel Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Monel reducing tee can connect various sizes of pipes together in one pipe system.

Monel Concentric Reducers manufacturer in India, Monel Reducer Manufacturer

Monel Concentric Reducers manufacturerMonel Pipe Reducer/ Reducers suppliers

Looking for Monel Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Monel pipe reducer: Monel concentric reducer and Monel eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Monel reducers are made of Monel seamless tube within the range of DN 15 – DN 1000.

Monel butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Monel eccentric butt welding reducer is a type of Monel pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Monel concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Monel eccentric reducers have a parallel edge, which results in an offsetting center. Monel Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Monel

Monel Eccentric Reducers manufacturer in India

Monel Eccentric Reducers manufacturerMonel Eccentric Pipe Reducer/ Reducers suppliers

Looking for Monel Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Monel

 

 

Monel Long Radius LR Elbows manufacturer in India, Monel LR Elbows manufacturer

Monel LR Elbows manufacturerMonel Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Monel long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Monel Short radius elbows have a center-to-end measurement equl to pipe diameter.

Monel long radius elbow costs less than a short radius fittings. Monel Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Monel 45° Long Radius Elbow
  • ASTM B366 Monel 90° Long Radius Elbow
  • ASTM B366 Monel 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Monel

Monel Short Radius SR Elbows manufacturer in India, Monel SR Elbows manufacturer

Monel Short Radius Elbows manufacturerMonel Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Monel short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Monel short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Monel 45° Short Radius Elbow
  • ASTM B366 Monel 90° Short Radius Elbow
  • ASTM B366 Monel 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Monel

Monel Pipe Cap Supplier, Monel End Cap manufacturer

Monel Pipe Cap manufacturerMonel Pipe Cap/ End Cap suppliers

Monel Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Monel butt weld caps come in various sizes and schedules to fit your Monel pipe and fitting needs.

Monel butt weld cap is a type of Monel Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Monel End Caps: cap, Seamless cap, Steel cap, Monel Seamless cap, pipe cap, cap end

  • ASTM B366 Monel Seamless cap
  • ASTM B366 Monel Erw cap
  • ASTM B366 Monel Large size cap
  • ASTM B366 Monel Small size cap

Materials: ASTM B366/ ASME SB366 Monel

Monel Stub End manufacturer in India, Monel Stub Ends manufacturer

Monel Stub End manufacturers in IndiaMonel Stub End suppliers

These Monel Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Monel stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Monel Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Monel Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Monel

Monel Cross manufacturer in India, Monel Pipe Cross manufacturer

Monel Cross manufacturers in IndiaMonel Pipe Cross suppliers

We can supply Monel pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Monel cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Monel Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Monel Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Monel

Hot Offer on Monel Pipe Fittings in 2017-18

We are have a wide size range of Monel Pipe Fittings in India, United States, UK, Italy, Canada, UAE, Iran, South Korea, Indonesia, Saudi Arabia, Germany, Malaysia, Thailand, Venezuela, Qatar, Jordan, Nigeria, Oman, Kuwait, Austria, China, Croatia, Bahrain, Peru, Serbia, Kazakhstan, New Zealand, Spain, Mexico, Turkey, Poland, France, Australia, Singapore, Brazil, Netherlands, Russia, Vietnam, Colombia, Bangladesh, South Africa, Taiwan, Norway, Czechia, Japan, Hong Kong, Romania, Azerbaijan, Belgium, Philippines, Argentina, Ukraine, Slovaki, Belarus, Japan, Sri Lanka, Maldives, Myanmar, Taiwan, Cambodia, Malta, Italy, Ukraine, Netherland, The Republic Of Congo, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Israel, Czechia, Albania, Australia, Perth, Tanzania, Finland, Belgium, Greece, Czech Republic, Ireland, Croatia, Slovenia, Equatorial Guinea, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Switzerland, Slovakia, Tunisia, Nigeria, Algeria, Angola, South Africa, Libya, Gabon, Philippines & Sudan for quick delivery of Monel Butt weld Pipe Fittings with mill certificate & all required documents.

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

We offer fastest delivery of ASTM B366 Monel Fittings in Mumbai, Navi Mumbai, Ahmedabad, Pune, Chennai, Bengaluru, New Delhi, Kuala Lumpur, Dubai, Kolkata, Riyadh, Vadodara, Bentonville, Hyderabad, Houston, Singapore, Cangzhou, Jakarta, Bangkok, Abu Dhabi, Noida, Lagos, Gurgaon, Coimbatore, Pimpri-Chinchwad, Shijiazhuang, Tehran, Thane, Doha, Karachi, Sharjah, London, Ho Chi Minh City, Surat, Jeddah, Busan, Shah Alam, Vasai, Calgary, Seoul, Kochi, Chandigarh, Lahore, Istanbul, Sydney, Perth, Patna, Kuantan, New York, Gujarat, Bengluru, Ranchi, Raipur, Manaus, Indore, Guwahati, Boston, Bhopal, Lucknow, Brownsburg, Vung Tau, Rio de Janeiro, Sao Paulo, Cairo, Gimhae-si, Clifton, Secunderabad, Al Wakrah Municipality, Al Khor, Al Daayen, Doha, Al Rayyan Municipality, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, Andhra Pradesh, Rajasthan, Tamil Nadu, Kerala, Madhya Pradesh, West Bengal, Bihar, Punjab, Goa, Haryana, Odisha, Jharkhand, Uttarakhand, Telangana, Arunachal Pradesh and Nagaland etc.

Important Information for ASTM B366 Monel Pipe Fittings buyers

Monel Pipe Fittings Chemical Composition

ASTM B366 Monel Buttweld Fittings Chemical Properties

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel Pipe Fittings Mechanical Properties

ASTM B366 Mechanical & Physical Properties of Monel Buttweld Fittings

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Monel Pipe Fittings Project Reference List

PROJECT NAME & LOCATION SUPPLIED MATERIALS
CIDADE DE ILHABELA, BRASIL Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
Epic of New Slug Catcher and 3 Phase Separator at CPSF, TURKMENISTAN ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
UPGRADE FURNACES UNITS TL3-RT3, FINLAND Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
EXPANSION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE CAPACITIES (HILLA, RUSAFA, NASSIRYIA), IRAQ Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
TÜRKIYE PETROL RAFINERILERI ANOMIM (TÜPRAS) IZMIT RAFINERISI – TURKEY – RESID UPGRADING PROJECT – RUP, TURKEY Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
FCC REVAMP PROJECT, ITALY Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
Furnace tube replacement BA-31001, FINLAND Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
HONG KONG OBSERVATION WHEEL (DW60/42), HONG KONG Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
TL3 RT3 Furnaces Shortage, FINLAND Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
Pipelines K1HB K3HB, FINLAND Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
Various projects for M&M Cardon en E&P Maturin, VENEZUELA Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
PPPC 2015, HP Steam Piping, FINLAND Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
STENUNGSUND C4, SWEDEN Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
PTA Expansion Project, NETHERLANDS Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling
UPGRADE CDU 3 & CDU 4, NETHERLANDS Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
GINA KROG JACKET, NETHERLANDS ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
BOSCONGO LITCHENDJILI ONSHORE GAS PLANT, CONGO Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
VERSALIS LINEA EPDM/OSBL FERRARA – EPC, ITALY Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
AZOMURES AMMONIA PLANT REVAMPING PROJECT, ROMANIA Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
BLACK DIAMOND, ANTWERP BELGIUM Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
TAR 2013, NETHERLANDS Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
GEOTHERMAL PLANT-LARDERELLO, ITALY Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
RUWAIS SULPHUR HANDLING TERMINAL-2, UNITED ARAB EMIRATES Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
HIGH PRESSURE STEAM BOILER & SUBSTATION #10, BAHRAIN Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
KHOR AL ZUBAIR POWER GENERATION PLANT, IRAQ Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
ANGOLA BLOCK 15/06 WEST HUB DEVELOPMENT PROJECT, ANGOLA Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
RAFFINERIA SAN NAZZARO DE BURGONDI (PV), ITALY Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
ADAM GAS LIFT PROJECT, TUNISIE Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling
PROGETTO MAM, ITALY Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
SAFCO-V UREA STAND ALONE PROJECT, SAUDI ARABIA ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
SURINAME PROJECT, SURINAME Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
AMSTEL TIE-IN P15C PROJECT, OFFSHORE DUTCH NORTH SEA Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
TAR 2012, NETHERLANDS Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
TA SPERE TK82 & TK40, NETHERLANDS Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
RE-ARRANGEMENT LPG PUMP FLOOR, NETHERLANDS Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
NEXEN GOLDEN EAGLE W-JACKET, OFFSHORE UK NORTH SEA Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
TAMAR VENT BOOM, MEDITERRENEAN Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
INTEGRAZIONE ATTIVITA’ ENI RAVENNA (IT) EPC, ITALY Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
NIGERIA- RIVERS STATE OCGT POWER PLANT,NIGERIA Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
HABSHAN-5 PROCESS PLANT, UNITED ARAB EMIRATES Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
IMPIANTO EST ED UNITA’ ASSOCIATE FERRERA ERBOGNONE (PV), ITALY Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
HDPE-NAO Mesaieed (QA) EPC, QATAR Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling
EPPE/LLDPE Rabigh (SA) EPC, KSA Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
PDH/PP Aljubail (SA) Sahara, KSA ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
Rabigh PC -1 PROJECT (PP UNIT), KSA Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
ESCATRON POWER PLANT 800 MW Combined Cycle, SPAIN Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
Eni SpA Divisione Agip-PIATTAFORME OFFSHORE,ITALY Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
RAFFINERIE NORD E SUD ISAB PRIOLO GARGALLO (SR), ITALY Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
315300-QATOFIN LLDPE PROJECT QATAR, QATAR Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
MO.S.E. MODULO SPERIMENTALE ELETTROMECCANICO, ITALY Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
PDH TOBOLSK (RU) EPC, RUSSIA Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
MALPENSA AIRPORT, ITALY Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
UGS WIERZCHOWICE (PL) EP, POLAND Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
365 MW UTE PORTO DO PECEM, BRASIL Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
720 MW UTE PORTO DO PECEM, BRASIL Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
CBIO OLEVANO DI LOMELLINA (IT) EPC, ITALY Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling
EAD ENDESA – CTE BOCAMINA, CHILE Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
EAA COLBUN – CENTRALE A CARBONE CILE (P), CHILE ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
M 5000 METHANOL PLANT (MHTL), TRINIDAD – STABILISATION AND UPGRADE PROJECT, TRINIDAD E TOBAGO Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
METANODOTTO P.S. VITTORINO-CELLINO-BUSSI, ITALY Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
QATAR FERT.CO. QAFCO 5 PROJECT, QATAR Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
RAFFINERIE ISAB (IMPIANTI SUD) – PRIOLO GARGALLO (SR) – REVAMPING DIESEL HYDROTREATER, ITALY Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
METANODOTTO DI COLLEGAMENTO “MONTE DELLA CRESCIA 1 DIR – C.LE GAS S.PIETRO 1 DIR”, ITALY Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
LIBONDO PROJECT, CONGO Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
WEST BURTON – B COMBINED CYCLE POWER STATION 3 X 430 MW, ENGLAND Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
PP OMSK (RU) EPCM, RUSSIA Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
Borealis LD5 Stenungsund, SWEDEN Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
PROGRAM 10+, POLAND Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
SONATRACH OL.GPL HASSI R’MEL ALGERIA, ALGERIA Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
ENI TUNISIA EPIC FOR PLINES & PLATFORM, TUNISIE Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling
SPCM PTFM A OLOWI PRJ GABON, GABON Monel Pipe fittings in form of Monel Long Radius Elbow, Monel Short Radius Elbow
ENI R.M. – INT. SEZ. HYDROCRACKING (TA),ITALY ASTM B366 Monel Pipe fittings in form of ASTM B366 Monel Long Radius Return Bend, ASTM B366 Monel Short Radius Return Bend, ASTM B366 Monel Reducing Elbow
METANODOTTO S.AGAPITO-LARINO-REGGENTE, ITALY Monel Pipe fittings in form of Monel End Cap, Monel Stub Ends, Monel Pipe Nipple
MORON AMMONIA, VENEZUELA Monel Pipe fittings in form of Monel Equal Tee, Monel Unequal Tee
CENTRALE DI COGENERAZIONE-FERRARA, ITALY Monel Pipe fittings in form of Monel Pipe Cross, Monel Reducing Cross
CENTRALE DI PRIOLO GARGALLO – IMPIANTO SOLARE TERMODINAMICO “ARCHIMEDE”, ITALY Monel Pipe fittings in form of Monel Cross, Monel Concentric Reducer
ARO KUWAIT EPC, KUWAIT Monel Pipe fittings in form of Monel Eccentric Reducer, Monel pipe Collar
LLDPE NIZHNEKAMSK (RU) EPCM, RUSSIA Monel Pipe fittings in form of Monel Pipe Coupling, Monel Swage Nipple
313700-ENI R&M NUOVO HYDROC. SANNAZZARO MSR, ITALY Supplied Monel Buttweld fittings in form of Monel End Cap, Monel Long Radius Elbow
HDPE SALAVAT (RU) EPCS, RUSSIA Supplied Monel Buttweld fittings in form of Monel Stub Ends, Monel Pipe Nipple
HDPE MUNCHSMUNSTER (DE) EPC, GERMANY Supplied Monel Buttweld fittings, Monel Buttweld Fittings in form of Monel Buttweld fittings in forms of Monel Equal Tee, Monel Unequal Tee
AMMONIA PLANT, TRINIDAD E TOBAGO Supplied Monel Buttweld fittings in form of Monel Concentric Reducer, Monel Eccentric Reducer
MELAMINE PLANT, TRINIDAD E TOBAGO Supplied Monel Buttweld fittings, Monel Pipe Fittings in form of Monel Collar, Monel Long Radius Elbow
UAN PLANT, TRINIDAD E TOBAGO Supplied Monel Buttweld fittings in form of Monel Short Radius Elbow, Monel Return Bend, Elbow, Monel Coupling

 

Monel Pipe Fittings Ready Stock

Products Size
Monel Elbows Long Radius Monel Stub Ends

Sizes 1/2″-48″

Monel Elbows Short Radius Monel Crosses
Monel Reducing Elbows Monel Reducing Crosses
Monel 45° Elbows Monel 180° LR Return Bends
Monel Tees Monel 180° SR Return Bends
Monel Tees Monel Pipe Bends / Piggable Bends
Monel Reducers Monel Couplings
Monel Concentric Reducers Monel Pipe Nipples
Monel Eccentric Reducers Monel Forged/Plate Cut Rings
Monel 3D Elbow Monel End Caps
Monel 5D Elbow Monel Forged / Plate Circles


 

Monel Pipe Fittings Size Range & Weight Chart (As per ASME B16.9)

Monel Pipe Fittings: elbow dimensions, ASTM A234 B/W fitting dimensions, Monel Pipe Fittings dimensions, Monel Pipe Fittings dimension chart

WEIGHTS OF MONEL LONG RADIUS REDUCING ELBOWS SCHEDULE STD

NPS LBS KG
2-1½ 1.3 0.59
2-1¼ 1.2 0.54
2-1 1.1 0.5
2-3/4
2½-2 2.45 1.11
2½-1½ 2.2 1
2½-1¼ 2.1 0.95
2½-1
3-2½ 4.15 1.88
3-2 3.5 1.59
3-1½ 3.2 1.45
3-1¼
3½-3 6 2.72
3½-2½ 5.4 2.45
3½-2 4.5 2.04
3½-1½
3½-1¼
4-3½ 8.2 3.72
4-3 7.5 3.4
4-2½ 10.5 4.76
4-2 5.95 2.7
4-1½
5-4 13.1 5.94
5-3½ 12.2 5.53
5-3 11.4 5.17
5-2½ 10.5 4.76
5-2
6-5 20.7 9.39
6-4 18.4 8.35
6-3½ 17.3 7.85
6-3 16.4 7.44
6-2½
8-6 39.2 17.78
8-5 35.5 16.1
8-4 32.4 14.7
8-3½
10-8 71.2 32.3
10-6 61.2 27.76
10-5 56.7 25.72
10-4
12-10 111.5 50.58
12-8 96.5 43.77
12-6 84.7 38.42
NPS LBS KG

Note:

  • All weights are in pounds and kilograms and approximated or estimated.

Locate Vishal Steel (India)

Registered Office:

Vishal Steel (India)
13/6, Silver Cinema Building, 2nd Khetwadi Back Road, Mumbai 400004, Maharashtra, India

Our stockyard:

Vishal Steel (India)
Chacharwadi vasna, Sarkhej-Bavla Highway, Changodar Ahmedabad – 382213, Gujarat, India

Our stockyard:

Vishal Steel (India)
Sadayamkupam Village, 311/1B, Sadayamkupam Road, Manali Chennai – 600103, Tamil Nadu, India

Our stockyard:

Vishal Steel (India)
80 Ft Road, Off White Field Road, Hoody Village, Bangalore-560048, Karnataka, India

Our stockyard:

Vishal Steel (India)
Ashok Path, Road No.2, Ashok Nagar, Ranchi – 834002, Jharkhand, INDIA

Our stockyard:

Vishal Steel (India)
G.E. Road, Mandir Hasaud, Raipur – 492101, Chhattisgarh, India

Get Free Quote

Monel Fittings, Monel Pipe Fittings supplier in India, Monel Pipe Fittings supplier in Rajkot, Gujarat, Supplier of Monel Pipe Fittings, Trader of Monel Buttweld Fittings in India, Distributor of Monel Butt Weld Fittings Dubai, Stockist of Monel Buttweld Pipe Fittings, Monel Elbows exporters in India, Monel Buttweld Fittings, Monel Pipe Fittings traders in India, Monel Elbow suppliers in India, Monel Cap, Pipe Fittings available in Monel Material, Monel Weld Fittings Stock, Source for ASME SB 366 Monel Pipe Fittings, Monel Pipe Fittings in Qatar, Iran, Singapore & Saudi Arabia, Manufacturer, Suppliers, Stockholder, Traders, Wholesaler, Dealer, Distributor, Importer & Exporter, Fabricator, Stockist of ASTM B366 Buttweld Pipe Fittings in Monel.