+91-22-67521137

What are the welding procedures for ASTM A182 F22 flanges?

Selecting the right welding procedure, filler material and temperature requires careful consideration for a strong and reliable weld.

  • The ASTM A182 F22 flanges manufacturer in India recommends that GTAW, GMAW and SMAW techniques can be used for welding.
  • The material must be preheated within the range of 150-250 °C.
  • The right filler material should be selected, depending on the welding technique. Like AWS A5.5 ER90S-B3 should be used for GTAW.
  • Welding parameters given by the manufacturers should also be followed.

ASME B16.5 SA 182 Gr F22 Slip On Flange and A182 F22 Class 3 Blind Flange manufacturer in India


ASTM A182 F22 Flanges

Male, Female, RJ, Tongue, RTJ, Raised, Groove, Flat Face A 182 F22 Steel Weld Neck Flange and SA 182 F22 CL3 Socket Weld Flange manufacturer in India


How does the weight of an SA 182 gr F22 slip on flange impact the overall cost?

The weight of the SA 182 gr F22 slip on flange can impact it's overall cost because:

  • Heavier flanges require more material
  • Bigger flanges need more machining and longer processing time, which might increase the manufacturing cost.
  • An increase in weight leads to greater transportation costs.

Alloy Steel F22 Flange

Alloy Steel F22 Flange

  • Wall Thickness :
  • Schedule 10/ SCH 20
  • Schedule 40/ SCH 80
  • Schedule 120/ SCH 180
A182 F22 Flange

A182 F22 Flange

  • Heat treatment :
  • Normalizing & quenching
  • Stress relieving
  • Solution Annealing
F22 Flange

F22 Flange

  • Documentation :
  • Raw material test reports
  • Guarantee letter
  • Heat treatment chart
ASTM A182 F22 Threaded Flange

ASTM A182 F22 Threaded Flange

  • Application :
  • Pharmaceuticals
  • Petrochemicals
  • Power generation
 A182 F22 Class 3 Puddle Flange

A182 F22 Class 3 Puddle Flange

  • Pressure Class
  • Class 150 To 300
  • 600LBS To 900LBS
  • 1500# To 2500#
SA-182-F22 RTJ Flanges

SA-182-F22 RTJ Flange

  • Sizes :
  • 12.7 to 609.6 MM
  • DN15 To DN2500
  • 1/2" to 24" Inch

What are the key factors to consider when selecting an A182 F22 class 3 blind flange?

  • Determine the pressure & temperature rating of the A182 F22 class 3 blind flange and ensure it is sufficient for the given application.
  • The flange size and dimensions must be compatible with the piping components.
  • The choice of flange face type will depend on your sealing requirements.

ASTM A182 F22 Flanges



F22 Flanges Specification

F22 Flanges Specification

Specification Chart ASTM A182 F22 Flanges
Manufacturer of Forged/ Threaded/ Screwed / Plate
Most common types SA 182 F22 Weld Neck Flanges (WNRF)
F22 Alloy Steel Blind Flange (BLRF)
A182 F22 Class 2 Threaded Flange
Alloy Steel F22 Lap Joint Flange (LJRF)
SA 182 Gr F22 Slip-On Flange (SORF)
SA182 F22 Class 3 Socket Weld Flanges (SWRF)
F22 Ring Type Joint Flanges (RTJF)
Standard And Dimensions DIN 2501/ DIN 2527/ JIS/ ISO/ P235GH/ API/ EN 1092-2/ EN/ BS/ DIN 2561/ EN 1092-1
Manufacturer Types Slip On/ Threaded/ Reducing/ Weld Neck/ Socket Weld/ Blind/ Lap Joint
Manufacturer Pressure Class Class 150 (lb) up to 24"
Class 300 (lb) up to 20"
Class 600 (lb) up to 20"
Class 900 (lb) up to 16"
Class 1500 (lb) up to 10"
Class 2500 (lb) up to 8"
EN Standard 6Bar/ 10Bar/ 16Bar/ 25Bar/ 40Bar
DIN Standard PN6/ PN10/ PN16/ PN25/ PN40/ PN64
JIS Standard 5K/ 10K/ 16K 20K/ 30K/ 40K/ 63K
Other Standard B16.47 Series A & B/ B16.48, BS4504/ GOST
UNI Standard 6 Bar/ 10 Bar/ 16 Bar/ 25 Bar/ 40 Bar
Flange Equipment Pushing Machine/ electric bevelling machine/ Press machine/ Bending machine/ Sand-blasting machine etc
Coating Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized
Methods Forging
Casting
Rolling
Cutting
Available Size NPS 1⁄₂" To 16” Manufacturer In India
List Of Schedule SCH 5S, SCH 10, SCH 40, SCH 80, SCH 120, SCH 160, SCH 180.
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
  • Price stability can be seen in ASTM A182 F22 Flanges manufacturer in India
  • Sa182 F22 Material Material have high corrosion resistance, particularly to stress corrosion cracking
  • Very little or no maintenance material
  • A182 F22 Class 3 Blind Flanges are suitable for harsh conditions.
  • Buy from SA 182 Gr F22 Slip On Flanges manufacturers in India for factory price
  • A largest Manufacturer, Suppliers, Dealer, Distributor, Source, Stock, Stockholder, Traders, Wholesaler, Distributor, Importer, Exporter, Fabricator & Stockist in Asia & Middle East.

ASTM A182 F22 Equivalent Material

STANDARD UNS Number WNR. DIN
ASTM A182 F22 Flanges K21590 1.7380 10CRM0910

ASTM A182 F22 Flanges Price

Type Of Flange Size In Inch SCH Class Grade Price In INR (India) Per Piece
Blind Flange 3/4 40 150 ASTM A182 F22 Class 3 120.00
- 1 40 150 - 170.00
- 1-1/2 40 150 - 258.00
- 2 40 150 - 390.00
Blind 4 40 150 - 460.00
Weld Neck Flange 2 STD 150 ASTM A182 F22 Class 3 350.00
- 4 STD 300 - 600.00
- 6 80 300 - 797.00
- 8 80 300 - 1250.00
Weld Neck 10 80 300 - 1850.00
Slip On Flange 2 40 150 ASTM A182 F22 Class 3 180.00
- 3 40 150 - 290.00
- 4 80 300 - 500.00
- 6 80 300 - 750.00
Slip On 8 80 300 1200.00

What is the recommended pressure class for an A182 Grade F22 weld neck flange?

The recommended pressure class for an A182 Grade F22 weld neck flange depends on the operating pressure and maximum temperature of your piping system. Refer to the industry standards and also adhere to the design requirements, including the flange size.


Types Of ASTM A182 F22 Flanges

F22 Steel Orifice Flange

F22 Steel Orifice Flange

 SA 182 F22 CL3 Spectacle Blind Flange

SA 182 F22 CL3 Spectacle Blind Flange

ASME SA 182 Gr F22 Plate Flange

ASME SA 182 Gr F22 Plate Flange

A182 F22 Class 2 Blind Flange

A182 F22 Class 2 Blind Flange

F22 Alloy Steel Slip On Flange

F22 Alloy Steel Slip On Flange

SA 182 Gr F22 CL 3 Weld Neck Flange

SA 182 Gr F22 CL 3 Weld Neck Flange

ASME SA 182 F22 Reducing Flange

ASME SA 182 F22 Reducing Flange

Alloy Steel F22 Vanstone Flange

Alloy Steel F22 Vanstone Flange

A182 F22 Class 1 Raised Face Flanges

A182 F22 Class 1 Raised Face Flange

F22 Class 3 Lap Joint Flange

F22 Class 3 Lap Joint Flange

F22 Steel Long Weld Neck Flange

F22 Steel Long Weld Neck Flange

SA 182 Gr F22 CL 2 Bleed Ring

SA 182 Gr F22 CL 2 Bleed Ring

A182 F22 Class 3 High Hub Blind Flange

A182 F22 Class 3 High Hub Blind Flange

F22 Alloy Steel Square Flange

F22 Alloy Steel Square Flange

ASME SA182 F22 Cl3 Flat Flange

ASME SA182 F22 Cl3 Flat Flange

ASTM A182 F22 Class 3 Equivalent

Grade Symbol ASTM A182 F22 Class 3
Composition % 0.05 - 0.15
UNS Number K21590
Alloy chromium-molybdenum
Elements Carbon

Available A182 F22 Flanges Test Machine

Chemical Element Test Machine

Chemical Element Test Machine

Tensile Test Machine

Tensile Test Machine

Impact Test Machine

Impact Test Machine

Hardness Test For Flange

Hardness Test For Flange

Flange Thickness Test

Flange Thickness Test

Flange Pdo Test

Flange PDO Test


ASTM A182 F22 Mechanical Properties

Grade Tensile Strength
(min.) ksi[MPa]
Yield Strength
(min.) ksi[MPa]
Elongation, (min.) % Reduction of
Area, (min.) %
Brinell Hardness
Number, HBW
ASTM A182 F22 Class 3 Flanges 75[515] 45[310] 20 30 156-207
ASTM A182 F22V Flanges 85-110[585-780] 60[415] 18 45 174-237

Packaging Of Alloy Steel F22 Flanges

Packaging Of Alloy Steel F22 Flanges

Chemical Element Test Machine

Packaging Of Alloy Steel F22 Flanges

Tensile Test Machine

Packaging Of Alloy Steel F22 Flanges

Impact Test Machine


ASTM A182 F22 Class 3 Chemical Composition

ID. Symbol* C Mn Cr Mo P S Si Others
ASTM A182 F22 Class 1 Flanges 0.05-0.15 0.30-0.60 0.50 2.00-2.50 0.040 0.040 0.87-1.13 -
ASTM A182 F22 Class 3 Flanges 0.05-0.15 0.30-0.60 0.50 2.00-2.50 0.040 0.040 0.87-1.13 -
ASTM A182 F22V Flanges 0.11-0.15 0.30-0.60 0.10 2.00-2.50 0.015 0.010 0.90-1.10 *J

A182 F22 Hardness


Brinell Hardness Number, HBW
ASTM A182 F22 Class 1 Flanges ≤170
ASTM A182 F22 Class 3 Flanges 156-207

Class 150 Alloy Steel F22 Flanges Weight In KG

Nominal Size Of Pipe  (NPS) Slip On (SORF) Threaded (NPT) Socket Weld (SWRF) Lap Joint (LOOSE) Blind (BLRF) Weld Neck (WNRF)
½  1 1 2 1 2 2
¾ 2 2 2 2 2 2
1 2 2 2 2 2 3
3 3 3 3 3 3
1½  3 3 3 3 4 4
5 5 5 5 5 6
2½  8 8 8 8 7 10
9 9 9 9 9 11.5
3½  11 12 11 11 13 12
13 13 13 13 17 16.5
15 15 15 15 20 21
19 19 19 19 27 26
30 30 30 30 47 42
10  43 43 43 43 70 54
12  64 64 64 64 123 88
14  90 90 90 105 140 114
16  106 98 98 140 180 140
18  130 130 130 160 220 165
20  165 165 165 195 285 197
22  185 185 185 245 355 225
24  220 220 220 275 430 268

Supplier of Class 150/ 300/ 600 ASTM A182 F22 Class 3 Lap Joint Flange and SA-182-F22 Spectacle Blind Flange with stamping & marking


A182 F22 Flanges Forging Process

  • Matrial Preparing
  • Matrial Cutting
  • Heating
  • Foring
  • Heat Treatment
  • Cutting & Shearing
  • Inspection

A182 F22 Temperature Range

maximum pressure for ASTM A182 F22 Flanges in PSI

ASME/ANSI B16.5ASTM A182 F22 Flanges Temperature Range
Temp (°F)(Class 150)(Class 300)(Class 400)(Class 600)(Class 900)(Class 1500)(Class 2500)
-20 to 1002656959251390208534705785
2002606809051360203533955660
3002306558701305195532605435
4002006408551280192032005330
5001706208301245186531055180
6001406058051210181530255040
6501255907851175176529404905
7001105707551135170528404730
750955307101065159526604430
800805106751015152525404230
85065485650975146024354060
90050450600900135022453745
9503528037556084514052345
1000201652203304958251370

ASTM A182 F22 Flanges Heat Treatment

ASTM A182 F22 Flanges Heat Treatment

ASTM A182 F22 Class 3 Weld Neck Flange Dimensions

ASTM A182 F22 Class 3 Weld Neck Flange Dimensions

NPS in Inch NPS In MM (O.D.) Outer Diameter Weld Neck Thickness Hub O.D. Weld Neck OD Welding Neck Length RF Diameter RF Height PCD Face Of Weld
(A) (B) (C) (D) (E) (G) (H) (I) (J)
1/2 15 90 9.6 30 21.3 46 34.9 2 60.3 1.6
3/4 20 100 11.2 38 26.7 51 42.9 2 69.9 1.6
1 25 110 12.7 49 33.4 54 50.8 2 79.4 1.6
1 1/4 32 115 14.3 59 42.2 56 63.5 2 88.9 1.6
1 1/2 40 125 15.9 65 48.3 60 73 2 98.4 1.6
2 50 150 17.5 78 60.3 62 92.1 2 120.7 1.6
2 1/2 65 180 20.7 90 73 68 104.8 2 139.7 1.6
3 80 190 22.3 108 88.9 68 127 2 152.4 1.6
3 1/2 90 215 22.3 122 101.6 70 139.7 2 177.8 1.6
4 100 230 22.3 135 114.3 75 157.2 2 190.5 1.6
5 125 255 22.3 164 141.3 87 185.7 2 215.9 1.6
6 150 280 23.9 192 168.3 87 215.9 2 241.3 1.6
8 200 345 27 246 219.1 100 269.9 2 298.5 1.6
10 250 405 28.6 305 273 100 323.8 2 362 1.6
12 300 485 30.2 365 323.8 113 381 2 431.8 1.6
14 350 535 33.4 400 355.6 125 412.8 2 476.3 1.6
16 400 595 35 457 406.4 125 469.9 2 539.8 1.6
18 450 635 38.1 505 457.2 138 533.4 2 577.9 1.6
20 500 700 41.3 559 508 143 584.2 2 635 1.6
24 600 815 46.1 663 610 151 692.2 2 749.3 1.6

A182 F22 Yield Strength

ASTM A182 F22 Flanges Yield Strength (minimum ksi [MPa])
ASTM A182 F22 Class 1 Flanges 30[205]
ASTM A182 F22 Class 3 Flanges 45[310]

SA-182-F22 RF Flanges UNS Designation

Grade Name UNS Designation
ASTM A182 F22 CL1 Flanges K21590
ASTM A182 F22 CL3 Flanges K21590

SA 182 F22 CL3 RTJ Flanges Tensile Strength

ASTM A182 F22 Flanges Tensile Strength (minimum) ksi[MPa]
ASTM A182 F22 Class 1 Flanges 30[205]
ASTM A182 F22 Class 3 Flanges 45[310]

ASME SA182 F22 Lap Joint Flanges Dimensions

ASME SA182 F22 Lap Joint Flanges Dimensions

Normal Size Of Steel Pipe In Inch Normal Size Of Steel Pipe in MM O.D. (WT) Lapped Thickness Inner Daimeter PCD Lapped Thickness Lap Joint Radius LJ Bolts Number Length Of (RF) Stud Lap Joint Flange Bolts Hole Size Weight In Kilogram (KG)
    A B C D E G          
1/2 15 90 30 16 22.9 60.3 11.2 3 4 55 5/8 0.8
3/4 20 100 38 16 28.2 69.9 12.7 3 4 65 5/8 0.9
1 25 110 49 17 34.9 79.4 14.3 3 4 65 5/8 0.9
1 1/4 32 115 59 21 43.7 88.9 15.9 5 4 70 5/8 1.4
1 1/2 40 125 65 22 50 98.4 17.5 6 4 70 5/8 1.4
2 50 150 78 25 62.5 120.7 19.1 8 4 85 3/4 2.3
2 1/2 65 180 90 29 75.4 139.7 22.3 8 4 90 3/4 3.2
3 80 190 108 30 91.4 152.4 23.9 10 4 90 3/4 3.7
3 1/2 90 215 122 32 104.1 177.8 23.9 11 8 90 3/4 5
4 100 230 135 33 116.8 190.5 23.9 11 8 90 3/4 5.9
5 125 255 164 36 144.4 215.9 23.9 11 8 95 7/8 6.8
6 150 280 192 40 171.4 241.3 25.4 13 8 100 7/8 8.6
8 200 345 246 44 222.2 298.5 28.6 13 8 110 7/8 13.7
10 250 405 305 49 277.4 362 30.2 13 12 115 1 19.5
12 300 485 365 56 328.2 431.8 31.8 13 12 120 1 29
14 350 535 400 79 360.2 476.3 35 13 12 135 1 1/8 41
16 400 595 457 87 411.2 539.8 36.6 13 16 135 1 1/8 54
18 450 635 505 97 462.3 577.9 39.7 13 16 145 1 1/4 59
20 500 700 559 103 514.4 635 42.9 13 20 160 1 1/4 75
24 600 815 663 111 616 749.3 47.9 13 20 170 1 3/8 100

A182 F22 Class 2 Orifice Flange Bolt Chart in Class 600

Size in Inch RF Stud Length No of Bolts Bolt Size UNC
1/2 75 4 1/2
3/4 90 4 5/8
1 90 4 5/8
1 1/4 95 4 5/8
1 1/2 110 4 3/4
2 110 8 5/8
2 1/2 120 8 3/4
3 125 8 3/4
3 1/2 140 8 7/8
4 145 8 7/8
5 165 8 1
6 170 12 1
8 190 12 1 1/8
10 215 16 1 1/4
12 220 20 1 1/4
14 235 20 1 3/8
16 255 20 1 1/2
18 275 20 1 5/8
20 285 24 1 5/8
24 330 24 1 7/8

ASTM A182 F22 Class 1 Blind Flange Dimensions

ASTM A182 F22 Class 1 Blind Flange Dimensions

NPS For (Normal Size Of Steel Pipe)Outer Diameter Of
(A)
WT Of (B)
RF Diameter Of
(C)
(D)
(Bolts Circle Diameter)
# Pipe Flange Bolts
Holes (B.H.)
Bolt Holes Diameter
Flanges Weight In Kilogram (KG)
1/2"3-1/27/161-3/82-3/845/82
3/4"3-7/81/21-11/162-3/445/82
1"4-1/49/1623-1/845/82
1-1/4"4-5/85/82-1/23-1/245/83
1-1/2"511/162-7/83-7/845/83
2"63/43-5/84-3/443/44
2-1/2"77/84-1/85-1/243/47
3"7-1/215/165643/49
3-1/2"8-1/215/165-1/2783/413
4"915/166-3/167-1/283/417
5"1015/167-5/168-1/287/820
6"1118-1/29-1/287/827
8"13-1/21-1/810-5/811-3/487/847
10"161-3/1612-3/414-1/412167
12"191-1/41517121123
14"211-3/816-1/418-3/4121-1/8139
16"23-1/21-7/1618-1/221-1/4161-1/8187
18"251-9/162122-3/4161-1/4217
20"27-1/21-11/162325201-1/4283
24"321-7/827-1/429-1/2201-3/8415

SA182 F22 Lap Joint Flanges Welding

SA182 F22 Lap Joint Flanges Welding
Check dimensions of BS4504 PN16 ASTM A182 F22 CL3 Threaded Flange and F22 Alloy Steel Orifice Flanges Material with smooth seal surface

A182 Grade F22 Vanstone Flange Manufacturing Process

Raw Material

Raw Material

  • Raw Materia
  • Materia Dimension And Visual
  • Materia Quantity
Inspection

Inspection

  • Chemical And Mechanical Analysis
  • Analysis Of Preservation Certificate
Cutting

Cutting

  • Cut Surface
  • Marking
  • Weight Measuring
Forging

Forging Flange

  • Grade Of Material
  • Control Flange Temperature
Heat Treatment

Heat Treatment

  • Flange Solution Treatment
  • Flanges Mechanical Test
  • Normalizing
Forging Rolling

Forging Rolling Of Flange

  • Check Dimension
  • Check Marking
  • Check Weight
Final Inspection

Final Inspection Of Pipe Flange

  • Test Of Visual
  • Test Of Nondestructive
Rust Prevention

Rust Prevention

  • View Preserve
  • Marking
  • Heat Number
Packaging

Packaging

  • Specification Of Packing
  • Inspection Of Packing
  • Delivery Time And Day

Manufacturer of AWWA C207 Class D SA 182 F22 Puddle/ Flat/ Plate Flange cutted from sheet and A182 Gr F22 Long Weld Neck Flange and Sa182f22 Forged Flange from Blanks/ Round bar, check f22 steel equivalent

ASME A182 F22 Slip On Flange Dimensions

ASME A182 F22 Slip On Flange Dimensions

Normal Size Of Steel Pipe(Inner Daimeter)(Outer Diameter)(Bolts Circle)Raised
(R)
Raised Face (RF)Hight For (H)Raised Face WTThick1FF (Flat Face)
(Thick2)
B.C. For
(Bolts Holes)
B.H. Number
(Bolt Hole)
1/20.883.502.381.38.0631.19.62.38.56.624
3/41.093.882.751.69.0631.50.62.44.56.624
11.364.253.122.00.0631.94.69.50.63.624
1-1/41.704.623.502.50.0632.31.81.56.75.624
1-1/21.975.003.882.88.0632.56.88.62.82.624
22.446.004.753.62.0633.061.00.69.94.754
2-1/22.947.005.504.12.0633.561.12.821.06.754
33.577.506.005.00.0634.251.19.881.13.754
3-1/24.078.507.005.50.0634.811.25.881.19.758
44.579.007.506.19.0635.311.31.881.25.758
55.6610.008.507.31.0636.441.44.881.38.888
66.7211.009.508.50.0637.561.56.941.50.888
88.7213.5011.7510.62.0639.691.751.061.69.888
1010.8816.0014.2512.75.06312.001.941.131.881.0012
1212.8819.0017.0015.00.06314.382.191.192.131.0012
1414.1421.0018.7516.25.06315.752.251.322.191.1212
1616.1623.5021.2518.50.06318.002.501.382.441.1216
1818.1825.0022.7521.00.06319.882.691.502.631.2516
2020.2027.5025.0023.00.06322.002.881.632.831.2520
2222.2229.5027.2525.25.06324.253.131.753.071.3820
2424.2532.0029.5027.25.06326.123.251.823.191.3820

Common A182 Gr F22 CL3 Screwed Flange Types

  • Plain Threaded Flange
  • Female Threaded Flange
  • Male Threaded Flange

How does ASTM A182 F22 cl3 threaded flange perform in corrosive environments?

The ASTM A182 F22 cl3 threaded flange shows good resistance to corrosion in various environments. It can also withstand chloride containing environment along pitting & crevice corrosion. The material can resist sulfide stress corrosion cracking and temperature dependent corrosion.


What is the hardness level of the F22 alloy steel orifice flanges?

The hardness level of F22 alloy steel orifice flanges depends on the heat treatment, manufacturing process and specific flange requirements. Generally, the hardness value can range between 150-250 HB or higher. Application of heat treatments, like normalization or tempering can increase the hardness level to a range of 187-255 HB.


Closed Die Forging Flanges

Closed Die Forging Flanges
Closed Die Forging Flanges
Closed Die Forging Flanges
Closed Die Forging Flanges
Closed Die Forging Flanges
Closed Die Forging Flanges