ASTM A234 WP11 Specification
Specification | ASTM A234 WP11 Fittings |
---|---|
Length Of Weld Fitting | 2" To 20" |
Coating | Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized |
Supporting Material | Gasket/ Ring Joint/ Flange Bolts |
Bending Radius | R=1D/ 2D/ 3D/ 5D/ 6D/ 8D/ 10D or Custom |
Surface Treatment | Sand blasting/ Sand Rolling/ Sand Blasting |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production Technique | Forged/ Heat treated and machined |
Standard | MSS-SP-43 ASME ASME B16.9 ANSI B16.11 ASME B16.28 |
Application | Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. |
Manufacturer Size | Buttweld ½" NB to 120" NB Seamless ½” to 24” Welded ½” to 120” Two Joint / Two Halve Fittings 6” to 48” |
Manufacturer Types | Reducer, End Cap, Stub End, Pipe Bend, Elbow, Tee |
Pressure Class | Class 150/ Class 300/ Class 600 |
Forging Methods | ButtWeld Welded Seamless |
Manufacturer Schedule | SCH 10S/ SCH 20/ SCH 40/ SCH 60/ SCH 80/ SCH 100/ SCH 120/ SCH 140/ SCH 160 |
Type Of Connection | Flange Weld End Bell Clamp End Threaded |
Our service | Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc. |
ASTM A234 WP11 Chemical Composition
Grade | Cr | Mo | C | Mn | P | S | Si | Others |
A234 WP11 Class 1 Fittings | 0.50-1.00 | 1.00-1.50 | 0.05-0.15 | 0.30-0.60 | 0.030 | 0.030 | 0.44-0.65 | - |
A234 WP11 CL2 And CL3 Fittings | 0.50-1.00 | 1.00-1.50 | 0.05-0.20 | 0.30-0.80 | 0.040 | 0.040 | 0.44-0.65 | - |
Vishal Steel Is Forgings Factory For Fittings And Pipes
WP11 Fittings Price List In India
Type Of Fitting | Size | SCH | Material | Price In INR (India) Per Piece |
---|---|---|---|---|
45 Deg Elbow | 1/2" | SCH 40 | ASTM A234 WP11 Class 1 Fittings | 99.24 |
- | 3/4" | 40 | - | 155.94 |
- | 1” | 40 | - | 259.23 |
90 Degree Elbow | 1-1/2” | 40 | 427.34 | |
- | 1" | 80 | - | 538.73 |
- | 2" | 80 | - | 683.54 |
Reducing Tee | 3/4" | 40 | ASTM A234 WP11 CL2 Fittings | 288.60 |
- | 1/2 | 40 | - | 243.03 |
- | 3/4” | 40 | - | 353.42 |
- | 1” | 40 | - | 507.34 |
- | 2” | 40 | - | 677.47 |
Con Reducer | 3/4 X 1/2” | 80 | ASTM A234 WPB | 218.73 |
- | 1 X 1/2” | 80 | - | 405.06 |
Ecc Reducer | 4 X 2” | 80 | - | 607.58 |
- | 8 X 4” | SCH 80 | ASTM A234 WP11 Fittings | 884.03 |
Types Of ASTM A234 WP11
A234 WP11 Fittings
Alloy Steel WP11 Pipe Fittings
ASTM A234 WP11 Pipe Fittings
WP11 Fittings
Alloy Steel WP11 Weldolet
Elbow A234 WP11
A234 Gr WP11 Equal Tee
SA 234 WP11 Reducing Tee
ASTM A234 Gr WP11 Concentric Reducer
Alloy Steel WP11 Eccentric Reducer
A234 WP11 Cl2 45 Deg Elbow
A234 WP11 Cl1 90 Degree Elbow
ASTM A234 Gr.WP11 Cl.1 End Cap
Grade WP11 Class 2 Stub End
Gr WP11 Cl2 Pipe Bend
A234 WP11 Short Radius Elbow
A234 WP11 Long Radius Elbow
SA 234 WP11 180 Degree Elbow
Alloy Steel WP11 Lateral Tee
WP11 Cl2 Split Tee
A234 WP11 Cl1 Flanged Tee
Grade WP11 Cl2 Return Bends
ASME A234 WP11 Cl 1 5D Elbow
WP11 Alloy Steel 3D Elbow
Packaging Of Alloy Steel WP11 Fittings
ASTM A234 WP11 Mechanical Properties
Grade | Tensile Strength, (min.) ksi[MPa] | Yield Strength, (min.) ksi[MPa] | Elongation, (min.) % | |
Longitudinal | Transverse | |||
ASTM A234 WP11 CL1 Fittings | 60[415] | 30[205] | 22 | 14 |
ASTM A234 WP11 CL2 Fittings | 70[485] | 40[275] | 22 | 14 |
ASTM A234 WP11 CL3 Fittings | 75[520] | 45[310] | 22 | 14 |
Machineries Available In Our Factory
ASTM A234 WP11 Concentric Reducer Price List
BW Reducers Type | Size In Inch | SCH | Price In INR (India) Per Piece | Material |
---|---|---|---|---|
Concentric | 3/4 X 1/2 | 160 | 96.00 | ASTM A234 WP11 |
- | 1 X 1/2 | 160 | 150.00 | -- |
- | 4 X 2 | 160 | 580.00 | -- |
- | 5 X 4 | 40 | 765.00 | -- |
- | 6 X 4 | 40 | 987.00 | ASTM A234 WP11 |
Click here for a complete ASME B16.9 Reducer Price List
Power Generation Projects
ASTM A234 WP11 Fittings
Wudongde Hydropower Station (China)
WP11 Fittings
Inga 3 (Democratic Republic of Congo)
A234 WP11 Fittings
Keeyask Hydropower Generating Station (Canada)
Alloy Steel WP11 Pipe Fittings
Hornsea Project 2 (UK)
A234 WP11 Cl2 Elbow
Ghana Wave Power Project (Ghana)
A234 WP11 Cl1 Tee
Ulanqab Wind Farm (China)
A234 Grade WP11 Class 2 End Cap
Triton Knoll (UK)
ASTM A234 Gr WP11 Cl2 Reducer
Leh and Kargil Solar Power Projects (India)
Elbow A234 WP11
Mohammed bin Rashid al-Maktoum Solar Park Phase IV (Dubai)
Alloy Steel WP11 Fittings Elongation
ASTM A234 WP11 Fittings Elongation, (minimum %) | |
---|---|
Longitudinal | 22 |
Transverse | 14 |
A234 WP11 Cl.2 Mitered Elbow Dimensions
Normal Pipe Diameter | (A) Minimum | Radius Of R | (S) In Inch | (M) |
---|---|---|---|---|
30 | 42w | 45 | 17p | |
32 | 44s | 48 | 18s | |
34 | 47r | 51 | 19f | |
36 | 49f | 54 | 21w | |
38 | 52i | 57 | 22r | |
40 | 55w | 60 | 23i | |
42 | 57s | 63 | 24p | 8r |
44 | 60r | 66 | 25s | |
46 | 62f | 69 | 27 | |
48 | 65i | 72 | 28i | 9p |
50 | 68w | 75 | 29r | |
52 | 70s | 78 | 30i | |
54 | 73r | 81 | 31p | 10f |
56 | 75f | 84 | 32f | |
58 | 78i | 87 | 34 | |
60 | 81w | 90 | 35w | |
62 | 83s | 93 | 36y | |
64 | 86y | 96 | 37i | |
66 | 88f | 99 | 38p | |
68 | 91i | 102 | 39f | |
70 | 94w | 105 | 41 | |
72 | 96s | 108 | 42r | |
78 | 104i | 117 | 45s | 15r |
84 | 112y | 126 | 49i | |
86 | 115 | 129 | 50y |
A234 WP11 Fittings Tensile Strength
ASTM A234 WP11 Fittings Tensile Strength, (minimum) ksi[MPa] | |
---|---|
ASTM A234 WP11 CL1 Fittings | 60[415] |
ASTM A234 WP11 CL2 Fittings | 70[485] |
ASTM A234 WP11 CL3 Fittings | 75[520] |
SA 234 WP11 Unequal Tee Price List
Type Of Tees | Size In Inch | SCH | Price In INR (India) Per Piece | Material |
---|---|---|---|---|
Unequal Tee | 2” X ½ | 80 | 267.00 | ASTM A234 WP11 |
- | 3” X 2 | 80 | 435.00 | -- |
- | 4” X 2 | 40 | 763.00 | -- |
Unequal Tee | 6” X 2 | 40 | 983.00 | ASTM A234 WP11 |
Click here for a complete ASME B16.9 Tee Price List
Global Client Reference list & delivery schedule of ASTM A234 WP11 Fittings
Location | Days | Clients |
---|---|---|
India | 7 |
|
Malaysia | 15 |
|
United Arab Emirates (UAE) | 15 |
|
Dubai | 15 |
|
Indonesia | 20 |
|
Singapore | 15 |
|
UK | 40 |
|
Australia | 40 |
|
Italy | 30 |
|
Germany | 32 |
|
Kuwait | 12 |
|
Oman | 12 |
|
Qatar | 15 |
|
ASME SA234 WP11 Fittings Pressure Rating
ASTM A234 WP11 Fittings Temperature Ratings | Types Of Pressure Ratings Class | ||||
---|---|---|---|---|---|
Class 150# | Class 300# | ||||
1/4 - 1 (Inch) | 1 1/4 - 2 (Inch) | 2 1/2 - 3 (Inch) | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Elbow A234 WP11 Wall Thickness
Normal Size Of Pipe (DN) | Schedule Number | Outer Daimeter In inch millmeter | Wall Thickness inch millmeter | Mass lb/ft kg/m |
---|---|---|---|---|
1/8 6 | 5S | 0.405 10.3 | ... | ... |
1/8 6 | 10S | 0.405 10.3 | 0.049 1.24 | 0.19 0.28 |
1/8 6 | 40S | 0.405 10.3 | 0.068 1.73 | 0.24 0.37 |
1/8 6 | 80S | 0.405 10.3 | 0.095 2.41 | 0.31 0.47 |
1/4 8 | 5S | 0.540 13.7 | ... | ... |
1/4 8 | 10S | 0.540 13.7 | 0.065 1.65 | 0.33 0.49 |
1/4 8 | 40S | 0.540 13.7 | 0.088 2.24 | 0.43 0.63 |
1/4 8 | 80S | 0.540 13.7 | 0.119 3.02 | 0.54 0.80 |
3/8 10 | 5S | 0.675 17.1 | ... | ... |
3/8 10 | 10S | 0.675 17.1 | 0.065 1.65 | 0.42 0.63 |
3/8 10 | 40S | 0.675 17.1 | 0.091 2.31 | 0.57 0.84 |
3/8 10 | 80S | 0.675 17.1 | 0.126 3.20 | 0.74 1.10 |
1/2 15 | 5S | 0.840 21.3 | 0.065 1.65 | 0.54 0.80 |
1/2 15 | 10S | 0.840 21.3 | 0.083 2.11 | 0.67 1.00 |
1/2 15 | 40S | 0.840 21.3 | 0.109 2.77 | 0.85 1.27 |
1/2 15 | 80S | 0.840 21.3 | 0.147 3.73 | 1.09 1.62 |
3/4 20 | 5S | 1.050 26.7 | 0.065 1.65 | 0.68 1.02 |
3/4 20 | 10S | 1.050 26.7 | 0.083 2.11 | 0.86 1.28 |
3/4 20 | 40S | 1.050 26.7 | 0.113 2.87 | 1.13 1.69 |
3/4 20 | 80S | 1.050 26.7 | 0.154 3.91 | 1.48 2.20 |
1 25 | 5S | 1.315 33.4 | 0.065 1.65 | 0.68 1.02 |
1 25 | 10S | 1.315 33.4 | 0.083 2.11 | 0.86 1.28 |
1 25 | 40S | 1.315 33.4 | 0.133 3.38 | 1.68 2.50 |
1 25 | 80S | 1.315 33.4 | 0.179 4.55 | 2.17 3.24 |
1-1/4 32 | 5S | 1.660 42.2 | 0.065 1.65 | 1.11 1.65 |
1-1/4 32 | 10S | 1.660 42.2 | 0.109 2.77 | 1.81 2.69 |
1-1/4 32 | 40S | 1.660 42.2 | 0.140 3.56 | 2.27 3.39 |
1-1/4 32 | 80S | 1.660 42.2 | 0.191 4.85 | 3.00 4.47 |
1-1/2 40 | 5S | 1.900 48.3 | 0.065 1.65 | 1.28 1.90 |
1-1/2 40 | 10S | 1.900 48.3 | 0.109 2.77 | 2.09 3.11 |
1-1/2 40 | 40S | 1.900 48.3 | 0.145 3.68 | 2.72 4.05 |
1-1/2 40 | 80S | 1.900 48.3 | 0.200 5.08 | 3.63 5.41 |
2 50 | 5S | 2.375 60.3 | 0.065 1.65 | 1.61 2.39 |
2 50 | 10S | 2.375 60.3 | 0.109 2.77 | 2.64 3.93 |
2 50 | 40S | 2.375 60.3 | 0.154 3.91 | 3.66 5.44 |
2 50 | 80S | 2.375 60.3 | 0.218 5.54 | 5.03 7.48 |
2-1/2 65 | 5S | 2.875 73 | 0.083 2.11 | 2.48 3.69 |
2-1/2 65 | 10S | 2.875 73 | 0.120 3.05 | 3.53 5.26 |
2-1/2 65 | 40S | 2.875 73 | 0.203 5.16 | 5.80 8.63 |
2-1/2 65 | 80S | 2.875 73 | 0.276 7.01 | 7.67 11.41 |
3 80 | 5S | 3.500 88.9 | 0.083 2.11 | 3.03 4.52 |
3 80 | 10S | 3.500 88.9 | 0.120 3.05 | 4.34 6.46 |
3 80 | 40S | 3.500 88.9 | 0.216 5.49 | 7.58 11.29 |
3 80 | 80S | 3.500 88.9 | 0.300 7.62 | 10.26 15.27 |
3-1/2 90 | 5S | 4.000 101.6 | 0.083 2.11 | 3.48 5.18 |
3-1/2 90 | 10S | 4.000 101.6 | 0.120 3.05 | 4.98 7.41 |
3-1/2 90 | 40S | 4.000 101.6 | 0.226 5.74 | 9.12 13.57 |
3-1/2 90 | 80S | 4.000 101.6 | 0.318 8.08 | 12.52 18.64 |
4 100 | 5S | 4.500 114.3 | 0.083 2.11 | 3.92 5.84 |
4 100 | 10S | 4.500 114.3 | 0.120 3.05 | 5.62 8.37 |
4 100 | 40S | 4.500 114.3 | 0.237 6.02 | 10.80 16.08 |
4 100 | 80S | 4.500 114.3 | 0.337 8.56 | 15.00 22.32 |
5 125 | 5S | 5.563 141.3 | 0.109 2.77 | 6.36 9.46 |
5 125 | 10S | 5.563 141.3 | 0.134 3.40 | 7.78 11.56 |
5 125 | 40S | 5.563 141.3 | 0.258 6.55 | 14.63 21.77 |
5 125 | 80S | 5.563 141.3 | 0.375 9.53 | 20.80 30.97 |
6 150 | 5S | 6.625 168.3 | 0.109 2.77 | 7.59 11.31 |
6 150 | 10S | 6.625 168.3 | 0.134 3.40 | 9.30 13.83 |
6 150 | 40S | 6.625 168.3 | 0.280 7.11 | 18.99 28.26 |
6 150 | 80S | 6.625 168.3 | 0.432 10.97 | 28.60 42.56 |
Grade WP11 Class 2 Pipe Cap Specification
Specification Checklist | ASTM A234 WP11 Pipe Cap |
---|---|
End Caps Uses | Alloy Steel WP11 End Cap used to seal an open end of the pipe. |
Common Type Of Schedule | SCH 20 To SCH 180. |
Manufacturer Size | NPS 1⁄₂" To NPS 48" |
Vishal Steel Manufacturer This Shape Of ASME B16.9 Cap | Square Round Rectangular “U” Shape “I” Shape Oval End Cap |
Standard | ASME B16.9 DIN 2617 EN 10253-2 |
Joint Type | Seamless Welded Butt-Weld Fabricated |
Different Ends Finishing Of Alloy Steel WP11 Lap Joint Stub End
ASTM A234 WP11 Fittings Dimensions
NPS For (Normal Size Of Pipe) | O.D. For (Outside Dai.) | BW 90 Deg Elbow | BW 45 Deg Elbow | BW Return 180 Deg Elbow | ||||
---|---|---|---|---|---|---|---|---|
(In Inch) | BW (Long Radius) Elbow | BW (Short Radius) Elbow | BW (Long Radius) Elbow | BW (Short Radius) Elbow | ||||
(MM) | (inch) | Center-Face (Inches) | Center-Face (Inches) | Center-Face (In Inches) | Radius (In Inches) | Center-Center (In Inches) | Back-face (In Inches) | |
1/2 | 21.3 | 0.840 | 1 1/2 | – | 5/8 | 2 | 1 7/8 | |
3/4 | 26.7 | 1.050 | 1 1/8 | – | 7/16 | 2 1/4 | 1 11/16 | |
1 | 33.4 | 1.315 | 1 1/2 | 1 | 7/8 | 3 | 2 3/16 | |
1 1/4 | 42.2 | 1.660 | 1 7/8 | 1 1/4 | 1 | 3 3/4 | 2 3/4 | |
1 1/2 | 48.3 | 1.900 | 2 1/4 | 1 1/2 | 1 1/8 | 3 | 4 1/2 | 3 1/4 |
2 | 60.3 | 2.375 | 3 | 2 | 1 3/8 | 4 | 6 | 4 3/16 |
2 1/2 | 73.0 | 2.875 | 3 3/4 | 2 1/2 | 1 3/4 | 5 | 7 1/2 | 5 3/16 |
3 | 88.9 | 3.500 | 4 1/2 | 3 | 2 | 6 | 9 | 6 1/4 |
3 1/2 | 101.6 | 4.000 | 5 1/4 | 3 1/2 | 2 1/4 | 7 | 10 1/2 | 7 1/4 |
4 | 114.3 | 4.500 | 6 | 4 | 2 1/2 | 8 | 12 | 8 1/4 |
5 | 141.3 | 5.563 | 7 1/2 | 5 | 3 1/8 | 10 | 15 | 10 5/16 |
6 | 168.3 | 6.625 | 9 | 6 | 3 3/4 | 12 | 18 | 12 5/16 |
8 | 219.1 | 8.625 | 12 | 8 | 5 | 12 | 24 | 16 5/16 |
10 | 273.1 | 10.750 | 15 | 10 | 6 1/4 | 15 | 30 | 20 3/8 |
NPS For (Normal Size Of Pipe) | O.D. For (Outside Dai.) | BW Pipe End Cap | BW Pipe Straight Tee | BW Pipe Straight Cross | Buttweld Stub Ends | |||
---|---|---|---|---|---|---|---|---|
(Inches) | (Millimeter) | (In Inches) | Length (In Inches) | Center-End (In Inches) | Center-End (In Inches) | Lap Dia. (In Inches) | Length (Long) (In Inches) | Length (Short) (In Inches) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
A234 WP11 Fittings Marking
ASTM A234 WP11 Fittings Marking includes ASME/ ANSI B16.9 Codes:
ASTM A234 WP11 Elbow Application
A234 WP11 90 Degree Elbow Dimensions
Elbow Size In Inch | ND | Elbow Size In (Millmeter) | Center-center | Radius Types | Center-end | Back-face |
D | O | A | B | K | ||
1/2 | 15 | 21,34 | 76,20 | 38,10 | 15,87 | 47,62 |
3/4 | 20 | 26,67 | 57,15 | 28,57 | 11,11 | 42,86 |
1 | 25 | 33,40 | 76,20 | 38,10 | 22,22 | 55,56 |
1 1/4 | 32 | 42,16 | 95,25 | 47,60 | 25,40 | 69,85 |
1 1/2 | 40 | 48,26 | 114,30 | 57,15 | 28,57 | 82,55 |
2 | 50 | 60,32 | 152,40 | 76,20 | 34,92 | 106,40 |
2 1/2 | 65 | 73,02 | 190,50 | 95,25 | 44,45 | 131,80 |
3 | 80 | 88,90 | 228,60 | 114,30 | 50,80 | 158,75 |
3 1/2 | 90 | 101,60 | 266,70 | 133,35 | 57,15 | 184,15 |
4 | 100 | 114,30 | 304,80 | 152,40 | 63,50 | 209,55 |
5 | 125 | 141,30 | 381,00 | 190,50 | 79,38 | 261,90 |
6 | 150 | 168,27 | 457,20 | 228,60 | 95,25 | 312,70 |
8 | 200 | 219,07 | 609,60 | 304,80 | 127,00 | 414,30 |
10 | 250 | 273,05 | 762,00 | 381,00 | 158,75 | 517,50 |
12 | 300 | 323,85 | 914,40 | 457,20 | 190,50 | 619,10 |
14 | 350 | 355,60 | 1066,80 | 533,40 | 222,25 | 711,20 |
16 | 400 | 406,40 | 1219,20 | 609,60 | 254,00 | 812,80 |
18 | 450 | 457,20 | 1371,60 | 685,80 | 285,74 | 914,40 |
20 | 500 | 508,00 | 1524,00 | 762,00 | 317,50 | 1016,00 |
22 | 550 | 558,80 | 1676,40 | 838,20 | 342,90 | 1117,60 |
24 | 600 | 609,60 | 1828,80 | 914,40 | 381,00 | 1219,20 |
28 | 700 | 711,20 | 2133,60 | 1066,80 | 441,90 | 1422,40 |
ASTM A234 Grade WP11 End Cap Machine
ASTM A234 WP11 End Cap Washing Machine Tap
Gr WP11 Pipe End Cap Washing Machine Water
SA 234 WP11 End Cap Gutter Stamping Machine
Alloy Steel WP11 End Cap Gallagher Machine Vented
A234 WP11 Material Yield Strength
ASTM A234 WP11 Fittings Yield Strength, (minimum) ksi[MPa] | ||
---|---|---|
WP11 CL1 Fittings : 30[205] | WP11 CL2 Fittings : 40[275] | WP11 CL3 Fittings : 45[310] |
ASTM A234 WP11 Barred Tee Dimensions
NPS Of A234 WP11 Barred Tee | Outer Daimeter at bevel | Center-End | |||
---|---|---|---|---|---|
Run | Outlet | Run | Outlet | Run (C) | Outlet (M) |
1/2" | 1/4" 3/8" | 21.3 | 13.7 17.3 | 25 | 25 |
3/4" | 3/8" 1/2" | 26.7 | 17.3 21.3 | 29 | 29 |
1" | 1/2" 3/4" | 33.4 | 21.3 26.7 | 38 | 38 |
1 1/4" | 1/2" 3/4" 1" | 42.2 | 21.3 26.7 33.4 | 48 | 48 |
1 1/2" | 1/2" 3/4" 1" 1 1/4" | 48.3 | 21.3 26.7 33.4 42.2 | 57 | 57 |
2" | 3/4" 1" 1 1/4" 1 1/2" | 60.3 | 26.7 33.4 42.2 48.3 | 64 | 44 51 57 60 |
2 1/2" | 1" 1 1/4" 1 1/2" 2" | 73.0 | 33.4 42.2 48.3 60.3 | 76 | 57 64 67 70 |
3" | 1 1/4" 1 1/2" 2" 2 1/2" | 88.9 | 42.2 48.3 60.3 73.0 | 86 | 70 73 76 83 |
3 1/2" | 1 1/2" 2" 2 1/2" 3" | 101.6 | 48.3 60.3 73.0 88.9 | 95 | 79 83 89 92 |
4" | 1 1/2" 2" 2 1/2" 3" 3 1/2" | 114.3 | 48.3 60.3 73.0 88.9 101.6 | 105 | 86 89 95 98 102 |
5" | 2" 2 1/2" 3" 3 1/2" 4" | 141.3 | 60.3 73.0 88.9 101.6 114.3 | 124 | 105 108 111 114 117 |
6" | 2 1/2" 3" 3 1/2" 4" 5 | 168.3 | 73.0 88.9 101.6 114.3 141.3 | 143 | 121 124 127 130 137 |
8" | 3 1/2" 4" 5" 6" | 219.1 | 101.6 114.3 141.3 168.3 | 178 | 152 156 162 168 |
10" | 4" 5" 6" 8" | 273.0 | 114.3 141.3 168.3 219.1 | 216 | 184 191 194 203 |
12" | 5" 6" 8" 10" | 323.8 | 141.3 168.3 219.1 273.0 | 254 | 216 219 229 241 |
14" | 6" 8" 10" 12" | 355.6 | 168.3 219.1 273.0 323.8 | 279 | 238 248 257 270 |
16" | 6" 8" 10" 12" 14" | 406.4 | 168.3 219.1 273.0 323.8 355.6 | 305 | 264 273 283 295 305 |
18" | 8" 10" 12" 14" 16" | 457.0 | 219.1 273.0 323.8 355.6 406.4 | 343 | 298 308 321 330 330 |
20" | 8" 10" 12" 14" 16" 18" | 508.0 | 219.1 273.0 323.8 355.6 406.4 457.0 | 381 | 324 333 346 356 356 368 |
22" | 10" 12" 14" 16" 18" 20" | 559.0 | 273.0 323.8 355.6 406.4 457.0 508.0 | 419 | 359 371 381 381 394 406 |
24" | 10" 12" 14" 16" 18" 20" 22" | 610.0 | 273.0 323.8 355.6 406.4 457.0 508.0 559.0 | 432 | 384 397 406 406 419 432 432 |
A234 Gr WP11 Flanged Reducing Tee Dimensions
A234 WP11 Cl2 Tee Weight
NPS Of ASME B16.9 Tee | Steel Pipe Tees Weight In LBS | SS Tees Fitting Weight In (KG) Kilogram |
1/2 | 0.35 | 0.16 |
3/4 | 0.45 | 0.2 |
1 | 0.75 | 0.34 |
1.1/4 | 1.3 | 0.59 |
1.1/2 | 2 | 0.91 |
2 | 3.5 | 1.59 |
2.1/2 | 6 | 2.72 |
3 | 7 | 3.18 |
3.1/2 | 9 | 4.08 |
4 | 12 | 5.44 |
5 | 21 | 9.53 |
6 | 34 | 15.42 |
8 | 55 | 24.95 |
10 | 85 | 38.56 |
12 | 120 | 54.43 |
14 | 165 | 74.84 |
16 | 195 | 88.45 |
18 | 249 | 112.94 |
20 | 342 | 155.13 |
22 | 414 | 187.79 |
24 | 528 | 239.5 |
26 | 770 | 349.27 |
30 | 1060 | 480.81 |
36 | 1490 | 675.85 |
A234 WP11 Stub End Short Pattern Dimensions
Normal Size Of Pipe | Outer Dai. At Bevel | Long Pattern Of ASME B16.9 Stub End | Short Pattern Of ASME B16.9 Stub End | Fillet Radius | Diameter of Lap | |
---|---|---|---|---|---|---|
Maximum | Minimum | (F) | (F) | (R) | (G) | |
1/2 | 22.8 | 20.5 | 76 | 51 | 3 | 35 |
3/4 | 28.1 | 25.9 | 76 | 51 | 3 | 43 |
1 | 35.0 | 32.6 | 102 | 51 | 3 | 51 |
1-1/4 | 43.6 | 41.4 | 102 | 51 | 5 | 64 |
1-1/2 | 49.9 | 47.5 | 102 | 51 | 6 | 73 |
2 | 62.4 | 59.5 | 152 | 64 | 8 | 92 |
2-1/2 | 75.3 | 72.2 | 152 | 64 | 8 | 105 |
3 | 91.3 | 88.1 | 152 | 64 | 10 | 127 |
3-1/2 | 104.0 | 100.8 | 152 | 76 | 10 | 140 |
4 | 116.7 | 113.5 | 152 | 76 | 11 | 157 |
5 | 144.3 | 140.5 | 203 | 76 | 11 | 186 |
6 | 171.3 | 167.5 | 203 | 89 | 13 | 216 |
8 | 222.1 | 218.3 | 203 | 102 | 13 | 270 |
10 | 277.2 | 272.3 | 254 | 127 | 13 | 324 |
12 | 328.0 | 323.1 | 254 | 152 | 13 | 381 |
14 | 359.5 | 354.8 | 305 | 152 | 13 | 413 |
16 | 411.0 | 405.6 | 305 | 152 | 13 | 470 |
18 | 462 | 456 | 305 | 152 | 13 | 533 |
20 | 514 | 507 | 305 | 152 | 13 | 584 |
22 | 565 | 558 | 305 | 152 | 13 | 641 |
24 | 616 | 609 | 305 | 152 | 13 | 692 |
ASTM A234 Gr WP11 Cl2 Pipe Cap Dimensions
Normal Size Of A234 WP11 Pipe Cap | Outer Diameter (D) | Length Of (Hight) | Length Of (Hight 1) |
1/2 | 21.3 | 25 | 25 |
3/4 | 26.7 | 25 | 25 |
1 | 33.4 | 38 | 38 |
1.1/4 | 42.2 | 38 | 38 |
1.1/2 | 48.3 | 38 | 38 |
2 | 60.3 | 38 | 44 |
2.1/2 | 73 | 38 | 51 |
3 | 88.9 | 51 | 64 |
3.1/2 | 101.6 | 64 | 76 |
4 | 114.3 | 64 | 76 |
5 | 141.3 | 76 | 89 |
6 | 168.3 | 89 | 102 |
8 | 219.1 | 102 | 127 |
10 | 273 | 127 | 152 |
12 | 323.8 | 152 | 178 |
14 | 355.6 | 165 | 191 |
16 | 406.4 | 178 | 203 |
18 | 457 | 203 | 229 |
20 | 508 | 229 | 254 |
22 | 559 | 254 | 254 |
24 | 610 | 267 | 305 |
26 | 660 | 267 | … |
28 | 711 | 267 | … |
30 | 762 | 267 | … |
32 | 813 | 267 | … |
34 | 864 | 237 | … |
36 | 914 | 267 | … |
38 | 965 | 305 | … |
40 | 1016 | 305 | … |
42 | 1067 | 305 | … |
44 | 1118 | 343 | … |
46 | 1168 | 343 | … |
48 | 1219 | 343 | … |
Welding Bevel Of A234 WP11 Buttweld Tee
A234-WP11 Cl.1 Buttweld End Cap Advantages
Advantages
ASTM A234 WP11 End Cap is used to blind or isolate the pipeline.
SA 234 WP11 End Cap used to seal an open end of the pipe.
A234 WP11 Cl2 Cap offer high mechanical strength.
A234 WP11 Cl1 Stub End Connection