ASTM A234 WP12 Fittings and SA 234 Gr WP12 Elbow/ Reducer/ Tee/ Cap

SA 234 Gr WP12 Elbow and A234 WP12 Reducer manufacturer in India

Table Of Content:

Alloy Steel WP12 Fittings Specification
Price List Of ASTM A234 WP12 Fittings
Types Of ASTM A234 WP12 Pipe Fittings
A234 WP12 Chemical Composition
SA234 WP12 Mechanical Properties
Dimensions Of A234 WP12 Fittings
Alloy Steel A234 WP12 Pipe Fittings Weight
Pressure Rating Of A234 WP12 Material
A234 WP12 Fittings Application
Uses Of Elbow A234 WP12
A234 WP12 Concentric Reducer Weight
SA 234 WP12 Flanged Reducing Tee Dimensions
ASTM A234 WP12 Butt Weld Fittings Tolerance
Grade WP12 A234 Tensile Strength

A234 Gr WP12 Yield Strength
Alloy Steel WP12 Fittings Testing Requirements
ASTM A234 WP12 Seamless Fittings Production Process
Alloy Steel WP12 Pipe Fittings Wall Thickness
A234 WP12 Stub End Tolerances
Gr WP12 Long Pattern Stub End Dimensions
Connection Types Of A234 WP12 Fittings
A234 WP12 End Cap Dimensions
ASME SA 234 WP12 Pipe Bend Dimensions
ASME Standard Of A234 WP12 Weld Fittings

Alloy Steel WP12 Fittings Specification

Specification	ASTM A234 WP12 Fittings
Forging Methods	ButtWeld Welded Seamless
Manufacturer Size	Buttweld ½" NB to 120" NB Seamless ½” to 24” Welded ½” to 120” Two Joint / Two Halve Fittings 6” to 48”
Type Of Connection	Flange Weld End Bell Clamp End Threaded
Supporting Material	Gasket/ Ring Joint/ Flange Bolts
Bending Radius	R=1D/ 2D/ 3D/ 5D/ 6D/ 8D/ 10D or Custom
Manufacturer Types	Reducer, End Cap, Stub End, Pipe Bend, Elbow, Tee
Our service	Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc.
Application	Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Manufacturer Schedule	SCH 10S/ SCH 20/ SCH 40/ SCH 60/ SCH 80/ SCH 100/ SCH 120/ SCH 140/ SCH 160
Surface Treatment	Sand blasting/ Sand Rolling/ Sand Blasting
Coating	Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized
Production Technique	Forged/ Heat treated and machined
Pressure Class	Class 150/ Class 300/ Class 600
Standard	MSS-SP-43 ASME ASME B16.9 ANSI B16.11 ASME B16.28
Length Of Weld Fitting	2" To 20"

For More Information Please Contact US

Price List Of ASTM A234 WP12 Fittings

Type Of Fitting	Size	SCH	Material	Price In INR (India) Per Piece
45 Deg Elbow	1/2"	SCH 40	ASTM A234 WP12	180.00
-	3/4"	40	-	220.00
-	1”	40	-	380.00
90 Degree Elbow	1-1/2”	40		550.00
-	1"	80	-	750.00
-	2"	80	-	940.000
Reducing Tee	3/4"	40	ASTM A234 WP12	520.00
-	1/2	40	-	390.03
-	3/4”	40	-	540.00
-	1”	40	-	650.34
-	2”	40	-	880.00
Con Reducer	3/4 X 1/2”	80	ASTM A234 WP12	334.73
-	1 X 1/2”	80	-	590.00
Ecc Reducer	4 X 2”	80	-	706.00
-	8 X 4”	SCH 80	ASTM A234 WP12	1180.00

The advantage of purchasing Alloy Steel WP12 Eccentric / Concentric Reducer and Pipe Cap directly from manufacturers is the reduced cost and wide selection which saves your time

Types Of ASTM A234 WP12 Pipe Fittings

Alloy Steel WP12 Fittings

A234 WP12 Elbow

ASTM A234 WP12 Equal Tee

A234 Gr WP12 Reducing Tee

A234 WP12 180 Degree Elbow

ASME SA 234 Gr WP12 Fabricated Tee

SA234 Grade WP12 Return Bends

WP12 Alloy Steel Reducing Cross

SA 234 WP12 Concentric Reducer

ASTM A234 Gr WP12 Eccentric Reducer

Grade WP12 45 Deg Elbow

ASME SA234 WP12 90 Degree Elbow

ASTM A234 WP12 End Cap

A234 WP12 Stub End

A234 WP12 Pipe Bend

Alloy Steel WP12 Short Elbow

WP12 Unequal Tee

SA 234 WP12 Split Tee

Grade WP12 5D Elbow

Alloy Steel WP12 3D Elbow

WP12 Fittings

ASTM A234 WP12 Pipe Fittings

A234 WP12 Fittings

SA234 WP12 Fittings

A234 WP12 Chemical Composition

Grade	P	Cr	Mo	C	Mn	Si	S
ASTM A234 WP12 Fittings	0.045	0.80–1.25	0.44–0.65	0.05–0.20	0.30–0.80	0.60 maximum	0.045

SA234 WP12 Mechanical Properties

Grade	Elongation (% in 50mm) minimum	Tensile Strength (MPa) minimum	Yield Strength 0.2% Proof (MPa) minimum
ASTM A234 WP12 Fittings	≥20	415 - 585	≥205

Dimensions Of A234 WP12 Fittings

Alloy Steel A234 WP12 Pipe Fittings Weight

Pressure Rating Of A234 WP12 Material

A234 WP12 Fittings Application

Specialty Chemicals
Power Generation
Off-Shore Oil Drilling Companies
Petrochemicals
Heat Exchangers
Pulp and Paper Industry

Sea Water Equipment
Condensers
Chemical Equipment
Gas Processing
Pharmaceutical Equipment
Pharmaceuticals

Supplier of ASTM A234 WP12 Stub End and Tee supply with Hydrostatic (Hydro) Testing & MTR reports

Uses Of Elbow A234 WP12

ASTM A234 WP12 Elbow are used to change the direction of flow between two pipes.
Alloy Steel WP12 Elbow are generally available with an angle of 22.5 Degree, 45 Degree and 90 Degree, 180 Degree.
If Steel pipe are of same diameter then normal pipe elbow are used otherwise Reducers elbow are used.

A234 WP12 Concentric Reducer Weight

Size (in)	Approx Weight In (lbs)
3/4 x 1/2	0.21
1 x 1/2	0.36
1 x 3/4	0.36
1-1/4 x 1/2	0.42
1-1/4 x 3/4	0.42
1-1/4 x 1	0.48
1-1/2 x 1/2	0.56
1-1/2 x 3/4	0.56
1-1/2 x 1	0.57
1-1/2 x 1-1/4	0.65
2 x 1/2	0.74
2 x 3/4	0.74
2 x 1	0.81
2 x 1-1/4	0.88
2 x 1-1/2	0.94
2-1/2 x 1	1.3
2-1/2 x 1-1/4	1.4
2-1/2 x 1-1/2	1.5
2-1/2 x 2	1.6
3 x 1	1.7
3 x 1-1/4	1.8
3 x 1-1/2	1.9
3 x 2	2
3 x 2-1/2	2.2
3-1/2 x 1-1/4	2.5
3-1/2 x 1-1/2	2.6
3-1/2 x 2	2.6

SA 234 WP12 Flanged Reducing Tee Dimensions

ASTM A234 WP12 Butt Weld Fittings Tolerance

Common Type Of Buttweld Fittings				45 degree elbows And 90 deg elbows	180 Deg Returns
Normal Size Of Steel Pipe	O.D. at Bevel	I.D. at End	WT For (Wall Thickness) t / t1	Center-End Dai. A-B-C-M	Center-Center Dai. (O)	Back-Face Dai. (K)	Align-ment of Ends (U)
1/2 a 2 1/2	1	0,8	Not	2	7	7	1
3 a 3 1/2	1	1,6	less	2	7	7	1
4	+2 -1	1,6	than	2	7	7	1
5 a 6	+3 -1	1,6	87,50%	2	7	7	1
8	2	1,6	of nominal	2	7	7	1
10	+4 -3	3,2	tickness	2	7	7	2
12 a 18	+4 -3	3,2	3	10	7	2
20 a 24	+6 -5	4,8	3	10	7	2
26 a 30	+7 -5	4,8	3	-	-	-	-
32 a 48	+7 -5	4,8	5	-	-	-	-

We perform impact, tensile, bending test before each dispatch of SA 234 WP12 Reducing/ Equal/ Unequal/ Lateral Tee and Cross

Grade WP12 A234 Tensile Strength

Tensile Strength (MPa) (minimum)	415 - 585

A234 Gr WP12 Yield Strength

Yield Strength 0.2% Proof (MPa) (minimum)	≥205

Alloy Steel WP12 Fittings Testing Requirements

Class	Ultrasonic Examination	Liquid Penetrant Examination	Intergranular Corrosion Test	Product Analysis
Class-1	100% on finished product over entire volume, (100% on the pipe/fogings used for making fittings) *	100 % external and all accessible internal surfaces	On one sample per lot +	On one sample from each size of each heat treatment batch
Class-2	Not required	100 % on all external and accessible internal surfaces	On one sample per lot +	On one sample from each size of each heat treatment batch.
Class-3	Not required	Not required	On one sample per lot +	On one sample from each size of each heat treatment batch.

ASTM A234 WP12 Seamless Fittings Production Process

Alloy Steel WP12 Pipe Fittings Wall Thickness

Normal Size Of Pipe (DN)	Schedule Number	Outer Daimeter In inch millmeter	Wall Thickness inch millmeter	Mass lb/ft kg/m
1/8 6	5S	0.405 10.3	...	...
1/8 6	10S	0.405 10.3	0.049 1.24	0.19 0.28
1/8 6	40S	0.405 10.3	0.068 1.73	0.24 0.37
1/8 6	80S	0.405 10.3	0.095 2.41	0.31 0.47
1/4 8	5S	0.540 13.7	...	...
1/4 8	10S	0.540 13.7	0.065 1.65	0.33 0.49
1/4 8	40S	0.540 13.7	0.088 2.24	0.43 0.63
1/4 8	80S	0.540 13.7	0.119 3.02	0.54 0.80
3/8 10	5S	0.675 17.1	...	...
3/8 10	10S	0.675 17.1	0.065 1.65	0.42 0.63
3/8 10	40S	0.675 17.1	0.091 2.31	0.57 0.84
3/8 10	80S	0.675 17.1	0.126 3.20	0.74 1.10
1/2 15	5S	0.840 21.3	0.065 1.65	0.54 0.80
1/2 15	10S	0.840 21.3	0.083 2.11	0.67 1.00
1/2 15	40S	0.840 21.3	0.109 2.77	0.85 1.27
1/2 15	80S	0.840 21.3	0.147 3.73	1.09 1.62
3/4 20	5S	1.050 26.7	0.065 1.65	0.68 1.02
3/4 20	10S	1.050 26.7	0.083 2.11	0.86 1.28
3/4 20	40S	1.050 26.7	0.113 2.87	1.13 1.69
3/4 20	80S	1.050 26.7	0.154 3.91	1.48 2.20
1 25	5S	1.315 33.4	0.065 1.65	0.68 1.02
1 25	10S	1.315 33.4	0.083 2.11	0.86 1.28
1 25	40S	1.315 33.4	0.133 3.38	1.68 2.50
1 25	80S	1.315 33.4	0.179 4.55	2.17 3.24
1-1/4 32	5S	1.660 42.2	0.065 1.65	1.11 1.65
1-1/4 32	10S	1.660 42.2	0.109 2.77	1.81 2.69
1-1/4 32	40S	1.660 42.2	0.140 3.56	2.27 3.39
1-1/4 32	80S	1.660 42.2	0.191 4.85	3.00 4.47
1-1/2 40	5S	1.900 48.3	0.065 1.65	1.28 1.90
1-1/2 40	10S	1.900 48.3	0.109 2.77	2.09 3.11
1-1/2 40	40S	1.900 48.3	0.145 3.68	2.72 4.05
1-1/2 40	80S	1.900 48.3	0.200 5.08	3.63 5.41
2 50	5S	2.375 60.3	0.065 1.65	1.61 2.39
2 50	10S	2.375 60.3	0.109 2.77	2.64 3.93
2 50	40S	2.375 60.3	0.154 3.91	3.66 5.44
2 50	80S	2.375 60.3	0.218 5.54	5.03 7.48
2-1/2 65	5S	2.875 73	0.083 2.11	2.48 3.69
2-1/2 65	10S	2.875 73	0.120 3.05	3.53 5.26
2-1/2 65	40S	2.875 73	0.203 5.16	5.80 8.63
2-1/2 65	80S	2.875 73	0.276 7.01	7.67 11.41
3 80	5S	3.500 88.9	0.083 2.11	3.03 4.52
3 80	10S	3.500 88.9	0.120 3.05	4.34 6.46
3 80	40S	3.500 88.9	0.216 5.49	7.58 11.29
3 80	80S	3.500 88.9	0.300 7.62	10.26 15.27
3-1/2 90	5S	4.000 101.6	0.083 2.11	3.48 5.18
3-1/2 90	10S	4.000 101.6	0.120 3.05	4.98 7.41
3-1/2 90	40S	4.000 101.6	0.226 5.74	9.12 13.57
3-1/2 90	80S	4.000 101.6	0.318 8.08	12.52 18.64
4 100	5S	4.500 114.3	0.083 2.11	3.92 5.84
4 100	10S	4.500 114.3	0.120 3.05	5.62 8.37
4 100	40S	4.500 114.3	0.237 6.02	10.80 16.08
4 100	80S	4.500 114.3	0.337 8.56	15.00 22.32
5 125	5S	5.563 141.3	0.109 2.77	6.36 9.46
5 125	10S	5.563 141.3	0.134 3.40	7.78 11.56
5 125	40S	5.563 141.3	0.258 6.55	14.63 21.77
5 125	80S	5.563 141.3	0.375 9.53	20.80 30.97
6 150	5S	6.625 168.3	0.109 2.77	7.59 11.31
6 150	10S	6.625 168.3	0.134 3.40	9.30 13.83
6 150	40S	6.625 168.3	0.280 7.11	18.99 28.26
6 150	80S	6.625 168.3	0.432 10.97	28.60 42.56

A234 WP12 Stub End Tolerances

NPS	1/2 up to 2.1/2	3 to 3.1/2	4	5 to 8	10 to 18	20 to 24
O.D. at Welding End (Outside Diameter)	+ 1.6 - 0.8	1.6	1.6	+ 2.29 - 1.6	+ 4.06 - 3.05	+ 6.35 - 4.83
Overall Length Of ((F))	1.6	1.6	1.6	1.6	2	2
O.D. of Lap ((G))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6
Wall Thickness of Lap ((T))	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0
Lap Fillet Radius of ((R))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6

Gr WP12 Long Pattern Stub End Dimensions

Normal Size Of Pipe	Outer Dai. At Bevel		Long Pattern Of ASME B16.9 Stubs End	Short Pattern Of ASME B16.9 Stubs End	Fillet Radius	Diameter of Lap
Normal Size Of Pipe	Maximum	Minimum	(F)	(F)	(R)	(G)
1/2	22.8	20.5	76	51	3	35
3/4	28.1	25.9	76	51	3	43
1	35.0	32.6	102	51	3	51
1-1/4	43.6	41.4	102	51	5	64
1-1/2	49.9	47.5	102	51	6	73
2	62.4	59.5	152	64	8	92
2-1/2	75.3	72.2	152	64	8	105
3	91.3	88.1	152	64	10	127
3-1/2	104.0	100.8	152	76	10	140
4	116.7	113.5	152	76	11	157
5	144.3	140.5	203	76	11	186
6	171.3	167.5	203	89	13	216
8	222.1	218.3	203	102	13	270
10	277.2	272.3	254	127	13	324
12	328.0	323.1	254	152	13	381
14	359.5	354.8	305	152	13	413
16	411.0	405.6	305	152	13	470
18	462	456	305	152	13	533
20	514	507	305	152	13	584
22	565	558	305	152	13	641
24	616	609	305	152	13	692

Connection Types Of A234 WP12 Fittings

Socket Weld
Forged
Threaded
Instrumentation
Hydraulic

4'' ASTM A234 Grade WP12 90 Degree Long Radius Elbow and SA 234 WP12 Buttweld Pipe Fittings manufacturer in India, Free Sample Available

A234 WP12 End Cap Dimensions

ASME SA 234 WP12 Pipe Bend Dimensions

ASME Standard Of A234 WP12 Weld Fittings

ASME B16.9
ASME B16.11
ASME B16.28
DIN 2353
DIN 2605-1
P235GH
EN 10253
DIN 2617