Carbon Steel Pipe Fittings

Carbon Steel 90° Elbow manufacturer

Carbon Steel 90 degree pipe elbow suppliers

Carbon Steel 90 degree elbow is a type of Carbon Steel Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Carbon Steel 90 Bend” or “Carbon Steel Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. 90° Elbows are made of Carbon Steel seamless tubes within the diameter range of DN 15 – DN 1000.

Carbon Steel 90 Degree butt weld elbows generally conform to ASTM A420 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Standard
ASME B16.9, EN 10253-2 A, EN 10253-2 B, DIN 2605, GOST 30753

Carbon Steel 45° Elbow manufacturer

Carbon Steel 45 Degree Elbows suppliers

Carbon Steel 45 degree elbow is the carbon steel elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle..45° Elbows are made of Carbon Steel seamless tubes within the diameter range of DN 15 – DN 1000.

The Carbon Steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Carbon Steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are Carbon Steel 45 degree elbows and Carbon Steel 90 degree elbows. Carbon Steel 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Carbon Steel butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Carbon Steel Tee manufacturer

Carbon Steel Pipe Tee suppliers

Our Carbon Steel butt weld pipe tees include Carbon Steel butt weld straight tees and Carbon Steel butt weld reducing tees. Carbon Steel tees are available within the range of DN 15 – DN 600. Our Carbon Steel butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an Carbon Steel pipe tee or specifically an Carbon Steel straight pipe tee. Carbon Steel Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Carbon Steel Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Carbon Steel reducing tee can connect various sizes of pipes together in one pipe system.

Carbon Steel Reducers manufacturer

Carbon Steel Pipe Reducer/ Reducers suppliers

We can manufacture two kinds of Carbon Steel pipe reducer: Carbon Steel concentric reducer and Carbon Steel eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Carbon Steel reducers are made of Carbon Steel seamless tube within the range of DN 15 – DN 1000.

Carbon Steel butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Carbon Steel eccentric butt welding reducer is a type of carbon steel pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Carbon Steel concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Carbon Steel eccentric reducers have a parallel edge, which results in an offsetting center. Carbon Steel Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Standard
ASME B16.9, EN 10253-2 A, EN 10253-2 B, DIN 2616, GOST 30753

Carbon Steel Carbon Steel Stub Ends End Prep:

• Beveled Ends
• Squared Ends
• Flanged Ends
• Victaulic Grooves
• Threaded Ends (Male Only)

Carbon Steel Pipe Cap/ End Cap manufacturer

Carbon Steel Pipe Cap/ End Cap suppliers

Carbon Steel heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Carbon Steel butt weld caps come in various sizes and schedules to fit your stainless steel pipe and fitting needs.

Carbon Steel butt weld cap is a type of carbon steel pipe fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Carbon Steel End Caps: cap, Seamless cap, Steel cap, Carbon Steel Seamless cap, pipe cap, cap end

• Seamless cap
• Erw cap
• large size cap
• small size cap