Duplex Pipe Fittings Specifications
Specifications | Duplex Pipe Fittings |
---|---|
Duplex 2205 Pipe Fittings Grade | UNS S31803 Fittings And UNS S32205 Fittings |
Manufacturer Dimension | ASME/ANSI B16.9/ MSS-SP-43/ ANSI/ASME B16.28/ ASME/ANSI B16.11 |
Thickness Chart | SCH 5S/ SCH 10S/ SCH 40S/ SCH 80S/ SCH 160S/ SCH XXS |
Coating | Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized |
Production Technique | Forged/ Heat treated and machined |
Surface Treatment | Sand blasting/ Sand Rolling/ Sand Blasting |
Application | Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc. |
Manufacturer Size | Buttweld ½" NB to 120" NB Seamless ½” to 24” Welded ½” to 120” Two Joint / Two Halve Fittings 6” to 48” |
Supporting Material | Gasket/ Ring Joint/ Flange Bolts |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Types Of Duplex Fittings Manufacturer | Reducer (Concentric And Eccentric) End Cap (Square/ Round/ Rectangular/ “U” Shape/ “I” Shape/ Oval End) Elbow (45 Deg, 90 Deg, 180 Deg, Long Radius & Short Radius, 1D, 1.5D, 3D, 5D) Tee ( Reducing, Equal, Unequal, Lateral, Straight, Barred, Split) |
Forging Methods | ButtWeld And Welded Or Seamless |
Bending Radius | R=1D/ 2D/ 3D/ 5D/ 6D/ 8D/ 10D or Custom |
Our service | Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc. |
Duplex Fittings Price List
Product | SIZE | RATE |
90 Deg Elbow | 5” X SCH 10 | @ RS 500 PER PCS |
90 Deg Elbow | 6” X SCH 10 | @ RS 700 PER PCS |
90 Deg Elbow | 8” X SCH 10 | @ RS 1200 PER PCS |
90 Deg Elbow | 10” X SCH 10 | @ RS 1900 PER PCS |
90 Deg Elbow | 12” X SCH 10 | @ RS 2700 PER PCS |
90 Deg Elbow | 14” X SCH 10 | @ RS 4300 PER PCS |
90 Deg Elbow | 16” X SCH 10 | @ RS 5500 PER PCS |
Types Of Duplex Steel Buttweld Fittings
Duplex Steel 90° Long Radius Elbow
Duplex 2205 90° Short Radius Elbow
Astm A815 UNS S31803 45° Long Radius Elbow
ASTM A815 UNS S32205 45° Short Radius Elbow
Duplex Stainless Steel 180° Long Radius Elbow
UNS S31803 180° Short Radius Elbow
Uns S32750 1D Elbow
Duplex 1.5D Elbow
WNR 1.4462 3D Elbow
2205 Stainless Steel 5D Elbow
SAF 2205 Welded Elbows
Duplex Elbow
SCH 10 Duplex Stainless Steel Elbow
SCH 40 Duplex Steel Elbow
SCH 80 2205 Elbow
Alloy 2205 Flanged Tee
2205 Duplex Stainless Steel Equal Tee
En 1.4462 Reducing Tee
Duplex 1.4462 Y Tee
Duplex 2507 Straight Tee
1.4462 Stainless Steel Fabricated Tee
Duplex Stainless Reducer
2205 Stainless Steel Concentric Reducer
AISI 2205 Eccentric Reducer
DDS End Cap
S31803 Duplex Pipe Bend
DIN 1.4462 Return Bends
2205 Steel Welded Pipe Fittings
Duplex SS 2205 Weld Fittings
Dulex Buttweld Fittings
Duplex Buttweld Pipe Fittings
Duplex Stainless Steel Pipe Fittings
Duplex Fittings
Duplex 2205 Fittings
Duplex 2205 Pipe Fittings
UNS S31803 Fittings
UNS S32205 Fittings
DSS Fittings
WNR 1.4462 Fittings
Types Of Duplex Steel Forged Fittings
Duplex 2205 Forged Elbow
Duplex Steel 90° Forged Elbow
Duplex 2205 45° Threaded Elbows
Astm A815 Uns S31803 Forged Cap
Astm A815 Uns S32205 Coupling
Duplex Stainless Steel Threaded Full Couling
UNS S31803 Threaded Half Coupling
UNS S32750 Forged Tee
Duplex Steel Union
WNR 1.4462 Forged Cross
2205 Stainless Steel Inserts
SAF 2205 Forged Plug
Alloy 2205 Street Elbow
2205 Duplex Stainless Steel Bushing
En 1.4462 Pipe Nipple
Duplex 1.4462 2000 LBS Forged Fittings
Duplex 2205 3000 LBS Forged Fittings
Duplex Stainless 6000 LBS Forged Fittings
2205 Stainless Steel 9000 LBS Forged Fittings
Duplex Steel Socket Weld Fittings
Duplex 2205 Fittings Grades
UNS S31803 Fittings
UNS S32205 Fittings
Duplex Pipe Fittings Weight Calculator
Check Online Duplex Pipe Fittings Weight Calculator
Duplex 2205 Pipe Fittings Tolerance
Duplex Pipe Fittings Tolerance | |||||||
Common Type Of Buttweld Fittings | 45 degree elbows And 90 deg elbows | 180 Deg Returns | |||||
Normal Size Of Steel Pipe | O.D. at Bevel | I.D. at End | WT For (Wall Thickness) t / t1 | Center-End Dai. A-B-C-M | Center-Center Dai. (O) | Back-Face Dai. (K) | Align-ment of Ends (U) |
1/2 a 2 1/2 | 1 | 0,8 | Not | 2 | 7 | 7 | 1 |
3 a 3 1/2 | 1 | 1,6 | less | 2 | 7 | 7 | 1 |
4 | +2 -1 | 1,6 | than | 2 | 7 | 7 | 1 |
5 a 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
8 | 2 | 1,6 | of nominal | 2 | 7 | 7 | 1 |
10 | +4 -3 | 3,2 | tickness | 2 | 7 | 7 | 2 |
12 a 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
20 a 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
26 a 30 | +7 -5 | 4,8 | 3 | - | - | - | - |
32 a 48 | +7 -5 | 4,8 | 5 | - | - | - | - |
Duplex Steel Pipe Fittings Pressure Rating
Duplex Pipe Fittings Temperature Ratings | Types Of Pressure Ratings Class | ||||
---|---|---|---|---|---|
Class 150# | Class 300# | ||||
1/4 - 1 (Inch) | 1 1/4 - 2 (Inch) | 2 1/2 - 3 (Inch) | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Duplex Pipe Fittings Manufacturing Process
ASTM A815 UNS S32750 30 Degree Elbow Dimensions
Duplex Steel S32205 Reducer Surface Coating
Schedule 80 Concentric Reducer Inspection
2205 Stub End Weight Chart
Normal Pipe Size In inch | ASME B16.9 STUB ENDS | |||
Schedule 5S | Schedule 10S | Schedule 40S | Schedule 80S | |
1/2 | 0.06 | 0.08 | 0.12 | 0.13 |
3/4 | 0.07 | 0.09 | 0.15 | 0.17 |
1 | 0.09 | 0.15 | 0.20 | 0.25 |
1 1/4 | 0.13 | 0.20 | 0.30 | 0.35 |
1 1/2 | 0.16 | 0.25 | 0.38 | 0.46 |
2 | 0.25 | 0.40 | 0.55 | 0.75 |
2 1/2 | 0.35 | 0.50 | 0.80 | 1.00 |
3 | 0.50 | 0.60 | 1.10 | 1.50 |
4 | 0.70 | 1.00 | 1.80 | 2.50 |
5 | 1.00 | 1.25 | 2.50 | 3.50 |
6 | 1.60 | 1.95 | 3.70 | 5.50 |
8 | 2.50 | 3.10 | 5.90 | 10.0 |
10 | 4.00 | 4.90 | 10.5 | 14.0 |
12 | 6.60 | 7.10 | 15.0 | 20.0 |
14 | 6.40 | 7.80 | 15.5 | 20.5 |
16 | 7.90 | 9.00 | 18.0 | 24.0 |
18 | 9.30 | 10.5 | 21.0 | 28.0 |
20 | 12.0 | 13.5 | 23.5 | 31.0 |
24 | 16.5 | 19.0 | 28.5 | 38.0 |
ASTM A815 Duplex 2205 Pipe Cap Surface Finish
Duplex Elbow Dimensions
Normal Size Of Steel Pipe | Outer Daimeter Of (D) | ASME B16.9 90 deg (LR) Center-End Of (A) | ASME B16.9 45 deg (LR) Center-End Of (B) | ASME B16.9 90 deg (3D) Center-End Of (A) | ASME B16.9 45 deg (3D) Center-End Of (B) |
1/2 | 21.3 | 38 | 16 | – | – |
3/4 | 26.7 | 38 | 19 | 57 | 24 |
1 | 33.4 | 38 | 22 | 76 | 31 |
1¼ | 42.2 | 48 | 25 | 95 | 39 |
1½ | 48.3 | 57 | 29 | 114 | 47 |
2 | 60.3 | 76 | 35 | 152 | 63 |
2½ | 73 | 95 | 44 | 190 | 79 |
3 | 88.9 | 114 | 51 | 229 | 95 |
3½ | 101.6 | 133 | 57 | 267 | 111 |
4 | 114.3 | 152 | 64 | 305 | 127 |
5 | 141.3 | 190 | 79 | 381 | 157 |
6 | 168.3 | 229 | 95 | 457 | 189 |
8 | 219.1 | 305 | 127 | 610 | 252 |
10 | 273 | 381 | 159 | 762 | 316 |
12 | 323.8 | 457 | 190 | 914 | 378 |
14 | 355.6 | 533 | 222 | 1067 | 441 |
16 | 406.4 | 610 | 254 | 1219 | 505 |
18 | 457 | 686 | 286 | 1372 | 568 |
20 | 508 | 762 | 318 | 1524 | 632 |
22 | 559 | 838 | 343 | 1676 | 694 |
24 | 610 | 914 | 381 | 1829 | 757 |
26 | 660 | 991 | 406 | 1981 | 821 |
28 | 711 | 1067 | 438 | 2134 | 883 |
30 | 762 | 1143 | 470 | 2286 | 964 |
32 | 813 | 1219 | 502 | 2438 | 1010 |
34 | 864 | 1295 | 533 | 2591 | 1073 |
36 | 914 | 1372 | 565 | 2743 | 1135 |
38 | 965 | 1448 | 600 | 2896 | 1200 |
40 | 1016 | 1524 | 632 | 3048 | 1264 |
42 | 1067 | 1600 | 660 | 3200 | 1326 |
44 | 1118 | 1676 | 695 | 3353 | 1389 |
46 | 1168 | 1753 | 727 | 3505 | 1453 |
48 | 1219 | 1829 | 759 | 3658 | 1516 |
Duplex 2205 Elbow Weight
Normal Pipe Size For Duplex 2205 Elbow | Weight In LBS | Weight In Kilogram (KG) |
1/2 | 0.09 | 0.04 |
3/4 | 0.09 | 0.04 |
1 | 0.25 | 0.11 |
1.1/4 | 0.38 | 0.17 |
1.1/2 | 0.4 | 0.18 |
2 | 0.81 | 0.37 |
2.1/2 | 1.75 | 0.79 |
3 | 2.63 | 1.19 |
3.1/2 | 3.5 | 1.59 |
4 | 4.5 | 2.04 |
5 | 7.5 | 3.4 |
6 | 12 | 5.44 |
8 | 23 | 10.43 |
10 | 43 | 19.5 |
12 | 62 | 28.12 |
14 | 80 | 36.29 |
16 | 100 | 45.36 |
18 | 126 | 57.15 |
20 | 160 | 72.57 |
22 | 197 | 89.36 |
24 | 238 | 107.95 |
26 | 275 | 124.74 |
30 | 367 | 166.47 |
36 | 531 | 240.86 |
NPS | LBS | KG |
Duplex Steel Pipe End Manufacturing Process
Duplex Stainless Steel Pipe Fittings Yield Strength
Yield Strength (ksi. (Mpa)) | 90(621) |
---|
DSS Fittings Tensile Strength
Tensile Strength (ksi.(Mpa)) | 125(862) |
---|
Duplex SS 2205 Hardness
Rockwell | Hardness | 25C |
---|
Duplex Steel Short Stub End Price List
Type Of Short End | Size In Inch | SCH | Price In INR (India) Per Piece | Grade |
---|---|---|---|---|
Short Stub End | 2 | 40 | 378.00 | Duplex Steel 2205 |
- | 4 | 40 | 836.00 | -- |
- | 6 | 40 | 1584.00 | - |
Short Stub End | 8 | 40 | 2371.00 | Duplex Steel 2205 |
ASTM A815 UNS S31803 Tee Hot Forming
SAF 2205 3D Elbow Dimensions
Normal Size Of Steel Pipe | Outer Daimeter | (A) | (B) |
3/4 | 26.7 | 57 | 24 |
1 | 33.4 | 76 | 31 |
1-1/4 | 42.2 | 95 | 39 |
1-1/2 | 48.3 | 114 | 47 |
2 | 60.3 | 152 | 63 |
2-1/2 | 73.0 | 190 | 79 |
3 | 88.9 | 229 | 95 |
3-1/2 | 101.6 | 267 | 111 |
4 | 114.3 | 305 | 127 |
5 | 141.3 | 381 | 157 |
6 | 168.3 | 457 | 189 |
8 | 219.1 | 610 | 252 |
10 | 273.0 | 762 | 316 |
12 | 323.8 | 914 | 378 |
14 | 355.6 | 1067 | 441 |
NPS | OD | A | B |
16 | 406.4 | 1219 | 505 |
18 | 457.0 | 1372 | 568 |
20 | 508.0 | 1524 | 632 |
22 | 559.0 | 1676 | 694 |
24 | 610.0 | 1829 | 757 |
26 | 660.0 | 1981 | 821 |
28 | 711.0 | 2134 | 883 |
30 | 762.0 | 2286 | 964 |
32 | 813.0 | 2438 | 1010 |
34 | 864.0 | 2591 | 1073 |
36 | 914.0 | 2743 | 1135 |
38 | 965.0 | 2896 | 1200 |
40 | 1016.0 | 3048 | 1264 |
42 | 1067.0 | 3200 | 1326 |
44 | 1118.0 | 3353 | 1389 |
ASTM A815 WPS 31803 5D Bend Dimensions
Normal Pipe Size | Bevel Outer Daimeter | Center-End | |||
(D) | (C) | (M) | |||
Nominal Diameter | Inch | Ser. (B) | Ser. (A) | ||
20 | 3/4 | 25 | 26.9 | 29 | |
200 | 8 | 219 | 219.1 | 178 | |
25 | 1 | 32 | 33.7 | 38 | |
32 | 11/4 | 38 | 42.4 | 48 | |
150 | 6 | 159 | 168.3 | 143 | |
50 | 2 | 57 | 60.3 | 64 | |
65 | 21/2 | 76 | 76.1(73) | 76 | |
80 | 3 | 89 | 88.9 | 86 | |
450 | 18 | 478 | 457.2 | 343 | |
90 | 31/2 | ― | 101.6 | 95 | |
100 | 4 | 108 | 114.3 | 105 | |
500 | 20 | 529 | 508.0 | 381 | |
300 | 12 | 325 | 323.9 | 254 | |
400 | 16 | 426 | 406.4 | 305 | |
600 | 24 | 630 | 610 | 432 | |
700 | 28 | 720 | 711 | 521 | |
950 | 38 | ― | 965 | 711 | |
800 | 32 | 820 | 813 | 597 | |
850 | 34 | ― | 864 | 635 | |
1050 | 42 | ― | 1067 | 762 | 711 |
1200 | 48 | 1220 | 1220 | 889 | 838 |
1100 | 44 | 1120 | 1118 | 813 | 762 |
Duplex Steel Tee Dimensions
NPS Of Duplex 2205 Equal Tee | O.D. (Outer Daimeter) at bevel | Center-End | |
---|---|---|---|
Run (C) | Outlet (M) | ||
1/2" | 21.3 | 25 | 25 |
3/4" | 26.7 | 29 | 29 |
1" | 33.4 | 38 | 38 |
1 1/4" | 42.2 | 48 | 48 |
1 1/2" | 48.3 | 57 | 57 |
2" | 60.3 | 64 | 64 |
2 1/2" | 73.0 | 76 | 76 |
3" | 88.9 | 86 | 86 |
3 1/2" | 101.6 | 95 | 95 |
4" | 114.3 | 105 | 105 |
5" | 141.3 | 124 | 124 |
6" | 168.3 | 143 | 143 |
8" | 219.1 | 178 | 178 |
10" | 273.0 | 216 | 216 |
12" | 323.8 | 254 | 254 |
14" | 355.6 | 279 | 279 |
16" | 406.4 | 305 | 305 |
18" | 457.0 | 343 | 343 |
20" | 508.0 | 381 | 381 |
22" | 559.0 | 419 | 419 |
24" | 610.0 | 432 | 432 |
Uses Of WNR 1.4462 Pipe Reducer
Uses
Duplex Pipe Reducer are used to connect a larger size pipe to a smaller size pipe.
Duplex 2205 Reducer is usually done to meet hydraulic flow requirements.
UNS S31803 Reducer is available in seamless and welded form.
UNS S31803 Chemical Composition
Duplex Pipe Fittings Chemical Composition | |
---|---|
Carbon | ≤0.03 |
Molybdenum | 2.5-3.5 |
Silicon | ≤1.00 |
Phosphate | ≤0.03 |
Sulfur | ≤0.02 |
Chromium | 21.0-23.0 |
Nickel | 4.5-6.5 |
Nitrogen | 0.08-0.2 |
Manganese | ≤2.00 |
Mechanical performance testing to ensure the weld quality of Duplex Steel Buttweld Fittings including Stub End, Cross, Reducing/ Equal/ Unequal/ Lateral Tee
ASTM A790 UNS S31803 Mechanical Properties
Yield Strength | Tensile Strength | Elongation | Rockwell | Charpy V-Notch Impact | |
---|---|---|---|---|---|
ksi.(Mpa) | ksi. (Mpa) | % | Hardness | mm-N/mm2 | mm-N/mm2 |
90(621) | 125(862) | 28 | 25C | 1310 | 844 |
Duplex S31803 Reducer Dimensions
Code Of RCD Reiso | (BIG) Ø | (SMALL) Ø | Hight (H) In Millmeter | Weight Of Theoretical In Kilogram | ||||
---|---|---|---|---|---|---|---|---|
(DN) | D In Millmeter | (S) Thickness In MM | (DN) | D Millmeter | (S) Thickness In MM | |||
27 21 | 3/4 | 26.9 | 2.3 | 1/2 | 21.3 | 2.0 | 38 | 0.08 |
33 21 | 1 | 33.7 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.09 |
33 27 | 3/4 | 26.9 | 2.3 | 0.09 | ||||
42 21 | 1"1/4 | 42.4 | 2.6 | 1/2 | 21.3 | 2.0 | 50 | 0.12 |
42 27 | 3/4 | 26.9 | 2.3 | 0.13 | ||||
42 33 | 1 | 33.7 | 2.6 | 0.14 | ||||
*48 21 | 1"1/2 | 48.3 | 2.6 | 1/2 | 21.3 | 2.0 | 64 | 0.18 |
48 27 | 3/4 | 26.9 | 2.3 | 0.19 | ||||
48 33 | 1 | 33.7 | 2.6 | 0.20 | ||||
48 42 | 1"1/4 | 42.4 | 2.6 | 0.20 | ||||
60 27 | 2 | 60.3 | 2.9 | 3/4 | 26.9 | 2.3 | 76 | 0.30 |
60 33 | 1 | 33.7 | 2.6 | 0.31 | ||||
60 42 | 1"1/4 | 42.4 | 2.6 | 0.32 | ||||
60 48 | 1"1/2 | 48.3 | 2.6 | 0.33 | ||||
76 33 | 2"1/2 | 76.1 | 2.9 | 1 | 33.7 | 2.6 | 90 | 0.40 |
76 42 | 1"1/4 | 42.4 | 2.6 | 0.47 | ||||
76 48 | 1"1/2 | 48.3 | 2.6 | 0.48 | ||||
76 60 | 2 | 60.3 | 2.6 | 0.49 | ||||
89 42 | 3 | 88.9 | 3.2 | 1"1/4 | 42.4 | 2.6 | 90 | 0.55 |
89 48 | 1"1/2 | 48.3 | 2.6 | 0.61 | ||||
89 60 | 2 | 60.3 | 2.9 | 0.62 | ||||
89 76 | 2"1/2 | 76.1 | 2.9 | 0.63 | ||||
114 48 | 4 | 114.3 | 3.6 | 1"1/2 | 48.3 | 2.6 | 100 | 0.85 |
114 60 | 2 | 60.3 | 2.9 | 0.98 | ||||
114 76 | 2"1/2 | 76.1 | 2.9 | 1.00 | ||||
114 89 | 3 | 88.9 | 3.2 | 1.02 | ||||
139 60 | 5 | 139.7 | 4.0 | 2 | 60.3 | 2.9 | 127 | 1.60 |
139 76 | 2"1/2 | 76.1 | 2.9 | 1.70 | ||||
139 89 | 3 | 88.9 | 3.2 | 1.74 | ||||
139 114 | 4 | 114.3 | 3.6 | 1.76 | ||||
*168 76 | 6 | 168.3 | 4.5 | 2"1/2 | 76.1 | 2.9 | 140 | 2.60 |
168 89 | 3 | 88.9 | 3.2 | 2.70 | ||||
168 114 | 4 | 114.3 | 3.6 | 2.82 | ||||
168 139 | 5 | 139.7 | 4.0 | 2.94 | ||||
219 114 | 8 | 219.1 | 6.3 | 4 | 114.3 | 3.6 | 152 | 5.03 |
219 139 | 5 | 139.7 | 4.0 | 5.12 | ||||
219 168 | 6 | 168.3 | 4.5 | 5.18 | ||||
*273 114 | 10 | 273.0 | 6.3 | 4 | 114.3 | 3.6 | 178 | 7.00 |
*273 139 | 5 | 139.7 | 4.0 | 7.20 | ||||
273 168 | 6 | 168.3 | 4.5 | 7.40 | ||||
273 219 | 8 | 219.1 | 6.3 | 7.55 | ||||
323 168 | 12 | 323.9 | 7.1 | 6 | 168.3 | 4.5 | 203 | 11.00 |
323 219 | 8 | 219.1 | 6.3 | 11.10 | ||||
323 273 | 10 | 273 | 6.3 | 11.20 |
ASTM A815 S31803 Flanged Reducing Tee Dimensions
Duplex Steel Pipe Tee Machine
Duplex Pipe Tee Cold Forming Machine
Duplex 2205 Tee Hydraulic Forming Press Equipment
Duplex Stainless Steel Tee Cold Pushing Forming Machine
UNS S32205 Extruding Machine
2205 Duplex Steel Barred Tee Dimensions
NPS Of Duplex 2205 Barred Tee | Outer Daimeter at bevel | Center-End | |||
---|---|---|---|---|---|
Run | Outlet | Run | Outlet | Run (C) | Outlet (M) |
1/2" | 1/4" 3/8" | 21.3 | 13.7 17.3 | 25 | 25 |
3/4" | 3/8" 1/2" | 26.7 | 17.3 21.3 | 29 | 29 |
1" | 1/2" 3/4" | 33.4 | 21.3 26.7 | 38 | 38 |
1 1/4" | 1/2" 3/4" 1" | 42.2 | 21.3 26.7 33.4 | 48 | 48 |
1 1/2" | 1/2" 3/4" 1" 1 1/4" | 48.3 | 21.3 26.7 33.4 42.2 | 57 | 57 |
2" | 3/4" 1" 1 1/4" 1 1/2" | 60.3 | 26.7 33.4 42.2 48.3 | 64 | 44 51 57 60 |
2 1/2" | 1" 1 1/4" 1 1/2" 2" | 73.0 | 33.4 42.2 48.3 60.3 | 76 | 57 64 67 70 |
3" | 1 1/4" 1 1/2" 2" 2 1/2" | 88.9 | 42.2 48.3 60.3 73.0 | 86 | 70 73 76 83 |
3 1/2" | 1 1/2" 2" 2 1/2" 3" | 101.6 | 48.3 60.3 73.0 88.9 | 95 | 79 83 89 92 |
4" | 1 1/2" 2" 2 1/2" 3" 3 1/2" | 114.3 | 48.3 60.3 73.0 88.9 101.6 | 105 | 86 89 95 98 102 |
5" | 2" 2 1/2" 3" 3 1/2" 4" | 141.3 | 60.3 73.0 88.9 101.6 114.3 | 124 | 105 108 111 114 117 |
6" | 2 1/2" 3" 3 1/2" 4" 5 | 168.3 | 73.0 88.9 101.6 114.3 141.3 | 143 | 121 124 127 130 137 |
8" | 3 1/2" 4" 5" 6" | 219.1 | 101.6 114.3 141.3 168.3 | 178 | 152 156 162 168 |
10" | 4" 5" 6" 8" | 273.0 | 114.3 141.3 168.3 219.1 | 216 | 184 191 194 203 |
12" | 5" 6" 8" 10" | 323.8 | 141.3 168.3 219.1 273.0 | 254 | 216 219 229 241 |
14" | 6" 8" 10" 12" | 355.6 | 168.3 219.1 273.0 323.8 | 279 | 238 248 257 270 |
16" | 6" 8" 10" 12" 14" | 406.4 | 168.3 219.1 273.0 323.8 355.6 | 305 | 264 273 283 295 305 |
18" | 8" 10" 12" 14" 16" | 457.0 | 219.1 273.0 323.8 355.6 406.4 | 343 | 298 308 321 330 330 |
20" | 8" 10" 12" 14" 16" 18" | 508.0 | 219.1 273.0 323.8 355.6 406.4 457.0 | 381 | 324 333 346 356 356 368 |
22" | 10" 12" 14" 16" 18" 20" | 559.0 | 273.0 323.8 355.6 406.4 457.0 508.0 | 419 | 359 371 381 381 394 406 |
24" | 10" 12" 14" 16" 18" 20" 22" | 610.0 | 273.0 323.8 355.6 406.4 457.0 508.0 559.0 | 432 | 384 397 406 406 419 432 432 |
ASME SA815 UNS S32205 End Cap Dimensions
dimensions Of (d1 x s) | height of (L) | weight in kilogram |
21,3 x 2,0 | 9,0 | 0,01 |
26,9 x 2,0 | 9,0 | 0,01 |
33,7 x 2,0 | 13,0 | 0,02 |
42,4 x 2,0 | 13,0 | 0,04 |
48,3 x 2,0 | 13,5 | 0,05 |
60,3 x 2,0 | 18,5 | 0,07 |
76,1 x 2,0 | 20,5 | 0,10 |
88,9 x 2,0 | 25,0 | 0,15 |
114,3 x 2,0 | 28,0 | 0,26 |
114,3 x 3,0 | 29,0 | 0,39 |
139,7 x 3,0 | 38,5 | 0,60 |
168,3 x 3,0 | 47,5 | 0,90 |
219,1 x 3,0 | 63,5 | 1,32 |
273,0 x 3,0 | 93,0 | 1,95 |
323,9 x 3,0 | 102,0 | 2,70 |
355,6 x 3,0 | 109,0 | 3,80 |
406,4 x 3,0 | 123,0 | 5,00 |
457,2 x 3,0 | 123,0 | 6,10 |
508,0 x 3,0 | 133,0 | 7,60 |
UNS S32205 Chemical Composition
Grade | C | Mn | S | Cr | Mo | Ni | N | Fe | Si | P |
UNS S32205 Pipe Fittings | 0.030 maximum | 2.00 maximum | 0.020 maximum | 21.0 – 23.0 | 2.50 - 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min. | 1.00 maximum | 0.030 maximum |
UNS S32205 Mechanical Properties
Grade | Melting Point | Yield Strength (0.2%Offset) | Elongation | Tensile Strength | Density |
UNS S32205 Pipe Fittings | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % | 7.8 g/cm3 |