+91-22-67521137

A complete guide for EN 1092-1 TYPE 01 Plate flange to TYPE 34 Weld-neck collar


EN 1092-1 Flange
Table Of Content:


EN 1092-1 Flange Specifications


Specification EN 1092-1 Flange
Schedule SCH 5S, SCH 10, SCH 40, SCH 80, SCH 120, SCH 160, SCH 180 To XXS
Manufacturer Pressure Class Class 150 (lb) up to 24"
Class 300 (lb) up to 20"
Class 600 (lb) up to 20"
Class 900 (lb) up to 16"
Class 1500 (lb) up to 10"
Class 2500 (lb) up to 8"
Production Technique Forged/ Heat treated and machined
Manufacturer of Forged/ Threaded/ Screwed / Plate
Coating Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized
Forging Methods Casting/ Forging/ Rolling/ Cutting
Supporting Material Gasket/ Ring Joint/ Flange Bolts
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Application Bitumen upgraders
Heavy oil refineries.
Nuclear power (mostly seamless).
Petrochemicals and acids.
Manufacturer Length NPS 1⁄₂" To NPS 48”
Face Type RTJ/ FF/ RF/ lap joint/ Male & Female / Tongue & Groove.
Flange Test Hydrostatic testing machine/ UI trasonic flaw detector/ X-ray detector/ Direct-reading Spectrograph/ Magnetic particle detector
Flange Equipment Pushing Machine/ electric bevelling machine/ Press machine/ Bending machine/ Sand-blasting machine etc

  • Price stability can be seen in EN 1092-1 Flange manufacturer in India
  • EN 1092-1 TYPE 01 Plate flange have high corrosion resistance, particularly to stress corrosion cracking
  • Very little or no maintenance material
  • EN 1092-1 TYPE 05 Blind flange are suitable for harsh conditions.
  • Buy from EN 1092-1 TYPE 11 Weld-neck Flange manufacturer in India for factory price
  • A largest Manufacturer, Source, Stock, Stockholder, Suppliers, Dealer, Distributor, Traders, Wholesaler, Distributor, Importer, Exporter, Fabricator & Stockist in Asia & Middle East.

Buy EN 1092-1 TYPE 11 Weld-neck flange at reasonable rate directly from manufacturers, refer EN 1092-1 PN6, PN10, PN16, PN40 Flanges dimensions and weight chart


EN 1092-1 Forged Flange Price List


Type Of Flange Size In Inch SCH Class Grade Price In INR (India) Per Piece
Stainless Steel Weld Neck Flange 2 STD 300 ASTM A182 F316 420.00
- 4 STD 300 - 630.00
- 6 80 300 - 1037.00
Weld Neck 6 80 300 - 1450.00
Stainless Steel Slip On Flange 2 40 300 - 250.00
- 3 40 300 - 460.00
- 8 80 300 - 1450.00
Slip On 8 80 300 ASTM A182 F316 1800.00
Stainless Steel Blind Flange 3/4 40 300 ASTM A182 F316L 250.00
1 40 300 - 250.00
- 1-1/2 40 300 - 380.00
- 2 40 300 - 550.00
Blind 4 40 300 ASTM A182 F316 9150.00

Types Of EN 1092-1 Pipe Flange


EN 1092-1 Blind Flanges

EN 1092-1 Blind Flanges

EN 1092-1 Slip On Flanges

EN 1092-1 Slip On Flanges

EN 1092-1 Welding Neck Flange

EN 1092-1 Welding Neck Flange

EN 1092-1 Socket Weld Flanges

EN 1092-1 Socket Weld Flanges

EN 1092-1 Plate Flanges

EN 1092-1 Plate Flanges

EN 1092-1 Lap Joint Flanges

EN 1092-1 Lap Joint Flanges

EN 1092-1 Threaded Flanges

EN 1092-1 Threaded Flanges

EN 1092-1 TYPE 01 Flanges

EN 1092-1 TYPE 01 Flanges

EN 1092-1 TYPE 02 Flanges

EN 1092-1 TYPE 02 Flanges

EN 1092-1 RTJ Flanges

EN 1092-1 RTJ Flanges

 EN 1092-1 Raised Face Flanges

EN 1092-1 Raised Face Flanges

EN 1092-1 Reducing Flanges

EN 1092-1 Reducing Flanges

EN 1092-1 TYPE 05 Flanges

EN 1092-1 TYPE 05 Flanges

 EN 1092-1 TYPE 11 Flanges

EN 1092-1 TYPE 11 Flanges

EN 1092-1 TYPE 12 Flat Flanges

EN 1092-1 TYPE 12 Flat Flanges

EN 1092-1 TYPE 13 Flanges

EN 1092-1 TYPE 13 Flanges

 EN 1092-1 TYPE 32 Large Diameter Flanges

EN 1092-1 TYPE 32 Large Diameter Flanges

EN 1092-1 TYPE 33 High Hub Blind Flanges

EN 1092-1 TYPE 33 High Hub Blind Flanges

EN 1092-1 TYPE 34 Flanges

EN 1092-1 TYPE 34 Flanges

 EN 1092-1 TYPE 04 Flanges

EN 1092-1 TYPE 04 Flanges

EN 1092-1 TYPE 21 Flanges

EN 1092-1 TYPE 21 Flanges

EN 1092-1 PN10 RF Flanges

EN 1092-1 PN10 RF Flanges

 EN 1092-1 PN6 Pipe Flanges

EN 1092-1 PN6 Pipe Flanges

EN 1092-1 PN40 Flanges

EN 1092-1 PN40 Flanges

EN 1092-1 PN16 Flanges

EN 1092-1 PN16 Flanges

 EN 1092-1 TYPE 01 Plate flanges

EN 1092-1 TYPE 01 Plate flanges

EN 1092-1 TYPE 02 Loose plate flanges

EN 1092-1 TYPE 02 Loose plate flanges

EN 1092-1 TYPE 05 Blind flanges

EN 1092-1 TYPE 05 Blind flanges

 EN 1092-1 TYPE 11 Weld-neck flange

EN 1092-1 TYPE 11 Weld-neck flange

EN 1092-1 TYPE 12 Hubbed slip-on flange

EN 1092-1 TYPE 12 Hubbed slip-on flange

EN 1092-1 TYPE 13 Hubbed threaded flange

EN 1092-1 TYPE 13 Hubbed threaded flange

 EN 1092-1 TYPE 32 Weld-on collar plate

EN 1092-1 TYPE 32 Weld-on collar plate

EN 1092-1 TYPE 33 Short collar

EN 1092-1 TYPE 33 Short collar

EN 1092-1 TYPE 34 Weld-neck collar

EN 1092-1 TYPE 34 Weld-neck collar

EN 1092-1 TYPE 04 Loose plate flange

EN 1092-1 TYPE 04 Loose plate flange

EN 1092-1 TYPE 21 LWN Flange

EN 1092-1 TYPE 21 LWN Flange


EN 1092-1 Flange Material


Stainless SteelASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8/ CF3/ CF8M/ CF3M/ DIN 1.4301/ DIN 1.4306/ DIN 1.4401/ DIN 1.4404/ DIN 1.4308/ DIN 1.4408/ DIN 1.4306/ DIN 1.4409
Carbon SteelASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Alloy SteelASTM A182 / ASME SA182 F5/ F9/ F11/ F12/ F22/ F91
Brass3602 / 2604 / H59 / H62 / etc.
InconelASTM B564 / ASME SB564, Inconel 600/ 601/ 625/ 718/ 783/ 690/ x750
TitaniumASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2/ Titanium Gr. 4/ Titanium Gr. 5/ Titanium Gr. 7
ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
HastelloyASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276)/ C22 (UNS N06022)/ C4/ C2000/ B2/ B3/ X Flanges
MonelASTM B564 / ASME SB564, Monel 400 (UNS No. N04400)/ Monel 500 (UNS No. N05500)
Copper NickelASTM / ASME SB 61 / 62 / 151 / 152/ Copper Nickel 90/10 (C70600 )/ Cupro Nickel 70/30 (C71500)/ UNS C71640
Alloy 20ASTM B462 / ASME SB462/ Carpenter® 20 Alloy/ Alloy 20Cb-3
Aluminium5052 /6061/ 6063 / 2017 / 7075 / etc.
NickelASTM B564 / ASME SB564, Nickel 200/ Nickel 201/ Nickel 205/ Nickel 205LC
DuplexS31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super DuplexS32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
IncoloyASTM B564 / ASME SB564, Incoloy 800/ 800H/ 800HT (UNS N08800)/ 825 (UNS N08825)/ 925 Flanges
254 SmoASTM A182 / ASME SA182, SMO 254/6Mo/ UNS S31254/ DIN 1.4547
NimonicNimonic 75/ Nimonic 80A/ Nimonic 90
Other materialTin bronze/ Alumunum bronze/ Lead bronze

EN 1092-1 TYPE 02 Loose plate flange and EN 1092-1 TYPE 05 Blind flange supplier in India offer Hydrostatic (Hydro) Testing & MTR reports


Types Of EN 1092-1: Figure 1 Flange


Types Of EN 1092-1: Figure 1 Flange

Types Of EN 1092-1: Figure 2 Flange


types of en 1092-1: figure 2 flange

EN 1092-1 Flange Dimensions


EN 1092-1 Flange Dimensions

EN 1092-1 PN6 Flange Dimensions


EN 1092-1 PN6 Flange Dimensions

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
107550114M1012352
158055114M1012402
209065114M1014502
2510075114M1014602
3212090144M1214702
40130100144M1214803
50140110144M1214903
65160130144M12141103
80190150184M16161283
100210170184M16161483
125240200188M16181783
150265225188M16182023
200320280188M16202583
2503753351812M16223123
3004403952212M20223654
3504904452212M20224154
4005404952216M20224554
4505955502216M20245204
5006456002220M20245704
6007557052620M24306705
7008608102624M24407755
8009759203024M27448805
900107510203024M27489805
1000117511203028M275210805
1200140513403332M306012955
1400163015603636M336815105
1600183017603640M337617105
1800204519703944M368419205
2000226521804248M399221255

EN 1092-1 PN10 Flange Dimensions


EN 1092-1 PN10 Flange Dimensions

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16181023
65185145188M16181223
80200160188M16201383
100220180188M16201583
125250210188M16221883
150285240228M20222123
200340295228M20242683
2503953502212M20263203
3004454002212M20263704
3505054602216M20264304
4005655152616M24264824
4506155652620M24285324
5006706202620M24285854
6007807253020M27346855
7008958403024M27388005
80010159503324M30489055
900111510503328M305010055
1000123011603628M335411105
1200145513803932M366613305
1400167515904236M397215355
1600191518204840M458217605
1800211520204844M459219605
2000232522304848M4510021705

EN 1092-1 PN16 Flange Dimensions


EN 1092-1 PN16 Flange Dimensions

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16181023
65185145188M16181223
80200160188M16201383
100220180188M16201583
125250210188M16221883
150285240228M20222123
2003402952212M20242683
2504053552612M24263203
3004604102612M24283784
3505204702616M24304384
4005805253016M27324904
4506405853020M27405504
5007156503320M30446104
6008407703620M33547255
7009108403624M33587955
80010259503924M36629005
900112510503928M366410005
1000125511704228M396811155
1200148513904832M458613305
1400168515904836M459415305
1600193018205640M5211217505
1800213020205644M5212119505
2000234522306248M5613621505

BS EN 1092-1 PN25 Flange Dimensions


BS EN 1092-1 PN25 Flange Dimensions

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16201023
65185145188M16221223
80200160188M16241383
100235190228M20241623
125270220268M24261883
150300250268M24282183
2003603102612M24302783
2504353703012M27323353
3004854303016M27343954
3505554903316M30384504
4006205503616M33405054
4506706003620M33505554
5007306603620M33516154
6008457703920M36667205

Dimensions Of PN40 Flange DIN EN 1092-1


Dimensions Of PN40 Flange DIN EN 1092-1

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16201023
65185145188M16221223
80200160188M16241383
100235190228M20241623
125270220268M24261883
150300250268M24282183
2003753203012M27362853
2504503853312M30383453
3005154503316M30424104
3505805103616M33464654
4006605853916M36505354
4506856103920M36575604
5007556704220M39576154
6008907954820M45727355

EN 1092-1 PN63 Flange Dimensions


EN 1092-1 PN63 Flange Dimensions

DN SizeOutside Diameter Of (D) Bolt Circle Diameter Of (K)Diameter of Bolt Hole (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
1010070144M1220402
1510575144M1220452
2013090184M1622582
25140100184M1624682
32155110224M2024782
40170125224M2026883
50180135224M20261023
65205160228M20261223
80215170228M20281383
100250200268M24301623
125295240308M27341883
150345280338M30362183
2004153453612M33422853
2504704003612M33463453
3005304603616M33524104
3506005253916M36564654
4006705854216M39605354

Flange Face Types Of EN 1092-1 Flange


Flange Face Types Of EN 1092-1 Flange

EN 1092-1 Flange Weight


Normal Size Of Steel PipeDimensions In MillimeterEN 1092-1 Flanges Weight In Kilogram
Normal Size Of Steel Pipe In InchesSize In MillimeterEN 1092-1 Flanges
Outer Daimeter (O.D.) In
(MM)
150# Flanges
Wall Thickness Of
(D)
In M)
(EN 1092-1 Slip On Flanges)
(EN 1092-1 Socket Weld Flanges)
(EN 1092-1 Weld Neck Flanges)(EN 1092-1 Blind Flanges)
1/21588.911.20.40.50.4
3/42098.612.70.60.70.6
12510814.20.810.9
1 1/432117.315.711.31.2
1 1/24012717.51.31.71.5
250152.419.12.12.62.4
2 1/265177.822.43.34.13.9
380190.523.93.94.94.9
3 1/290215.923.94.86.16.2
4100228.623.95.36.87.0
512525423.96.18.68.6
6150279.425.47.510.611.3
8200342.928.412.117.619.6
10250406.430.216.52428.6
12300482.631.826.236.543.2
14350533.435.134.648.458.1
16400596.936.644.860.676.1
1845063539.648.968.393.7
20500698.542.961.984.5122.0

EN 1092-1 Type 11 PN 10 Weld Neck Flange Dimensions


EN 1092-1 Type 11 PN 10 Weld Neck Flange Dimensions

DN SizeOutside Diameter Of Pipe (A)O.D. Of DDiameter of Bolt Circle, (K) Diameter of Bolt Holes, (L)Number of boltsDiameter of Raised Face, (D)Raised Face Height, (F1)Wall Thickness Flange, (C)Flange Length, (H)Diameter Of Neck, (N)Wall thickness, (S)Right End Length, (H1)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.21490601444021635282.06
1521.31895651444521638322.06
2026.925105751445821840402.36
2533.732115851446821840462.66
3242.4381401001847821842562.66
4048.3451501101848831845642.67
5060.35716512518410231845742.98
6576.17918514518812231845922.910
8088.989200160188138320501053.210
100114.3108220180188158320521313.612
125139.7133250210188188322551564.012
150168.3159285240228212322551844.512
200219.1219340295228268324622346.316
2502732733953502212320326682926.316
300323.93254454002212370426683427.116
350355.63775054602216430426683854007.116
400406.44265655152616482426724404457.116
4504574806155652620532428724885007.116
5005085306706202620585428755425507.116
6006106307807253020685530826426508.018
7007117208958403024800535857468.818
80081382010159503324905538968508.818
90091492011151050332810055389995012.520
1000101610201230116036281110544105105212.520
1200121912201455138039321330555132125612.525
1400142214201675159042361535565143146014.225
1600162616201915182048401760575159166616.025
1800182918202115202048441960585175186817.530
2000203220202325223048482170590186207217.530
2200223525502440565223705100202227520.035
2400243827602650565625705110218247822.235
2600262029602850566027805110224268025.040
2800282031803070566430005124244288225.040
3000302034053290626832105132257308532.045

EN 1092-1 Type 11 PN 16 Weld Neck Flange Dimensions


EN 1092-1 Type 11 PN 16 Weld Neck Flange Dimensions

DN SizeOutside Diameter Of Pipe (A)O.D. Of DDiameter of Bolt Circle, (K) Diameter of Bolt Holes, (L)Number of boltsDiameter of Raised Face, (D)Raised Face Height, (F1)Wall Thickness Flange, (C)Flange Length, (H)Diameter Of Neck, (N)Wall thickness, (S)Right End Length, (H1)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.21490601444021635282.06
1521.31895651444521638322.06
2026.925105751445821840402.36
2533.732115851446821840462.66
3242.4381401001847821842562.66
4048.3451501101848831845642.67
5060.35716512518410231845742.98
6576.17918514518812231845922.910
8088.989200160188138320501053.210
100114.3108220180188158320521313.612
125139.7133250210188188322551564.012
150168.3159285240228212322551844.512
200219.12193402952212268324622356.316
2502732734053552612320326702926.316
300323.93254604102612378428783447.116
350355.63775204702616438430823904008.016
400406.44265805253016490432854454508.016
4504574806405853020550434834905068.016
5005085307156503320610436845485598.016
60061063084077036207255408867067010.018
700711720910840362479554010475575510.018
8008138201025950392490056210885585512.520
900914920112510503928100056411895595812.520
10001016102012551170422811155681371058106012.522
1200121912201485139048321330578160126214.230
1400142214201685159048361530584177146516.030
16001626162019301820564017505102204166817.535
18001829182021302020564419505110218187020.035
20002032202023452230624821505124238207222.040

EN 1092-1 Type 11 PN 25 Weld Neck Flange Dimensions


EN 1092-1 Type 11 PN 25 Weld Neck Flange Dimensions

DN SizeOutside Diameter Of Pipe (A)O.D. Of DDiameter of Bolt Circle, (K) Diameter of Bolt Holes, (L)Number of boltsDiameter of Raised Face, (D)Raised Face Height, (F1)Wall Thickness Flange, (C)Flange Length, (H)Diameter Of Neck, (N)Wall thickness, (S)Right End Length, (H1)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.21490601444021635282.06
1521.31895651444521638322.06
2026.925105751445821840402.36
2533.732115851446821840462.66
3242.4381401001847821842562.66
4048.3451501101848831845642.67
5060.35716512518410232048752.98
6576.17918514518812232252902.910
8088.989200160188138324581053.212
100114.3108235190228162324651343.612
125139.7133270220268188326681624.012
150168.3159300250268218328751924.512
200219.12193603102612278330802446.316
2502732734253703012335332882987.118
300323.93254854303016395434923528.018
350355.637755549033164504381003984068.020
400406.442662055036165054401104524648.820
45045748067060036205554461105005148.820
500508530730660362061544812555857010.020
600610630845770392072054812566067011.020
700711720960875422482055012976076614.220
8008138201085990482493055313886487416.022
900914920118510904828103055714896897417.524
10001016102013201210562811405631601070107420.024

EN 1092-1 Flange Tolerances


Type Of EN 1092-1 Pipe Flange DiameterTolerance Chart
(A) (Outer Diameter)
  • When Outer Diameter is 24 Inch or less: ±1/16" (1.6 mm)
  • When Outer Diameter is over 24": ±1/8" (3.2 mm)
(D) (Inner Diameter)
  • 10 Inches and smaller: ±1/32" (0.8 in mm)
  • 12 Inches thru 18": +1/8" (3.2 in mm)
  • 20 Inches and larger: -1/16" (1.6 in mm)
(B) Contact Face
  • 1/16" (RF): ±1/32" (0.8 mm)
  • 1/4" (RF), Tongue And Groove (male And female): ±1/64" (0.4 mm)
(J) Hub At Base Dai.
  • When hub base is 24 inches or smaller: ±1/16" (1.6 millimeter)
  • When hub base is over 24": ±1/8" (3.2 millimeter)
(H) Diameter of hub at point of welding
  • 5 inch or smaller: +3/32" (2.4 mm), -1/32" (0.8 millimeter)
  • 6 inch or larger: +5/32" (4.0 millimeter), -1/32 (0.8 mm)
(P) Drilling
  • (B.C.): ±1/16" (1.6 mm)
  • (B.H.) spacing: ±1/32" (0.8 mm)
  Eccentricity of (bc) with respect to facing
  • 2 1/2" or smaller ±1/32" (0.8 mm) max.
  • 3" or larger ±1/16" (1.6 mm) max.
(C) (W.T.)
  • 18 inch or smaller: ±1/8" (3.2 mm), -0"
  • 20 inch or larger: ±3/16" (4.8 mm), -0"
(K) hub Length
  • 10 Inch or smaller: ±1/16" (1.6 millimeter)
  • 12 Inch or larger: ±1/8" (3.2 millimeter)

EN 1092-1 Flange Bolt Length


Class 150Class 300Class 600
NPS# Studs And BoltsDiameter of Studs And BoltsLength of Stud# Studs And BoltsDiameter of Studs And BoltsLength of Stud# Studs And BoltsDiameter of Studs And BoltsLength of Stud
1/16 RFRTJ1/16 RFRTJ1/4 RFRTJ
1/240.502-1/440.502-1/2340.5033
3/440.502-1/240.6333-1/240.633-1/23-1/2
140.502-1/2340.6333-1/240.633-1/23-1/2
1-1/440.502-3/43-1/440.633-1/43-3/440.633-3/43-3/4
1-1/240.502-3/43-1/440.753-1/2440.754-1/44-1/4
240.633-1/43-3/480.633-1/2480.634-1/44-1/4
2-1/240.633-1/2480.7544-1/280.754-3/44-3/4
340.633-1/2480.754-1/44-3/480.7555
3-1/280.633-1/2480.754-1/4580.885-1/25-1/2
480.633-1/2480.754-1/2580.885-3/45-3/4
580.753-3/44-1/480.754-3/45-1/481.006-1/26-1/2
680.7544-1/2120.754-3/45-1/2121.006-3/46-3/4
880.754-1/44-3/4120.885-1/26121.137-1/27-3/4
10120.884-1/25161.006-1/46-3/4161.258-1/28-1/2
12120.884-3/45-1/4161.136-3/47-1/4201.258-3/48-3/4
14121.005-1/45-3/4201.1377-1/2201.389-1/49-1/4
16161.005-1/45-3/4201.257-1/28201.501010
18161.135-3/46-1/4241.257-3/48-1/4201.6310-3/410-3/4
20201.136-1/46-3/4241.2588-3/4241.6311-1/411-1/2
24201.256-3/47-1/4241.50910241.881313-1/4

Class 900Class 1500Class 2500
NPS# Studs And BoltsDiameter of Studs And BoltsLength of Stud# Studs And BoltsDiameter of Studs And BoltsLength of Stud# Studs And BoltsDiameter of Studs And BoltsLength of Stud
1/4 RFRTJ1/4 RFRTJ1/4 RFRTJ
1/240.754-1/44-1/440.754-1/44-1/440.754-3/44-3/4
3/440.754-1/24-1/240.754-1/24-1/240.7555
140.885540.885540.885-1/25-1/2
1-1/440.885540.885541.0066
1-1/241.005-1/25-1/241.005-1/25-1/241.136-3/46-3/4
280.885-3/45-3/480.885-3/45-3/481.0077
2-1/281.006-1/46-1/481.006-1/46-1/481.137-3/48
380.885-3/45-3/481.137781.258-3/49
481.136-3/46-3/481.257-3/47-3/481.501010-1/4
581.257-1/27-1/281.509-3/49-3/481.7511-3/412-1/4
6121.137-1/27-3/4121.3810-1/410-1/282.0013-1/214
8121.388-3/48-3/4121.6311-1/211-3/4122.001515-1/2
10161.389-1/49-1/4121.8813-1/413-1/2122.5019-1/420
12201.381010162.0014-3/415-1/4122.7521-1/422
14201.5010-3/411162.251616-3/4
16201.6311-1/411-1/2162.5017-1/218-1/2
18201.8812-3/413-1/4162.7519-1/220-3/4
20202.0013-3/414-1/4163.0021-1/422-1/4
24202.5017-1/418163.5024-1/425-1/2

Gasket For EN 1092-1 Flanges


Gasket For EN 1092-1 Flanges
(Normal Size Of Steel Pipes) In Inch (I.D.) Inner Daimeter Gasket
(O.D.) Outer Daimeter Gasket
Class 150#/ LB Class 300#/ LB Class 400#/ LB Class 600#/ LB Class 900#/ LB
1/2 0.84 1.875 2.125 2.125 2.125 2.50
3/4 1.06 2.25 2.625 2.625 2.625 2.75
1 1.31 2.625 2.875 2.875 2.875 3.125
1 1/4 1.66 3 3.25 3.25 3.25 3.50
1 1/2 1.91 3.375 3.75 3.75 3.75 3.875
2 2.38 4.125 4.375 4.375 4.375 5.625
2 1/2 2.88 4.875 5.125 5.125 5.125 6.50
3 3.50 5.375 5.875 5.875 5.875 6.625
4 4.50 6.875 7.125 7.00 7.625 8.125
5 5.56 7.75 8.50 8.375 9.50 9.75
6 6.62 8.75 9.875 9.75 10.50 11.375
8 8.62 11 12.125 12.00 12.625 14.125
10 10.75 13.375 14.25 14.125 15.75 17.125
12 12.75 16.125 16.625 16.50 18.00 19.625

EN 1092 1 Flange Pressure Rating


EN 1092 1 Flange Pressure Rating

EN 1092-1 Type 01 PN 10 Plate Flange Dimensions


EN 1092-1 Type 01 PN 10 Plate Flange Dimensions

Size Of DNPipe O.D. Of (A)Outside Diameter Of (D) Bolt CircleDiameter Of (K)Bolt Hole Diameter Of (L)Number of boltBolts SizeWall Thickness Of Flange, (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)Bore Diameter Of (B)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.214906014 4M121440 2 18 15
1521.3189565144M12144522219
2026.92510575144M121658227.526
2533.73211585144M121668234.533
3242.438140100184M161878243.539
4048.345150110184M161888349.546
5060.357165125184M1620102361.559
6576.179185145188M1620122377.578
8088.989200160188M1620138390.591
100114.3108220180188M16221583116110
125139.7133250210188M16221883141.5135
150168.3159285240228M20242123170.5161
200219.1219340295228M20242683221.5222
2502732733953502212M20263203276.5276
300323.93254454002212M20263704327.5328
350355.63775054602216M20304304359.5380
400406.44265655152616M24324824411430
4504574806155652620M24365324462484
5005085306706202620M24385854513.5534
6006106307807253020M27426855616.5634
7007117208958403024M27508005715724
80081382010159503324M30569055817824
900914920111510503328M306210055918924
100010161020123011603628M33701110510201024
120012191220145513803932M36831330512231224
140014221420167515904236M39901535514261424
160016261620191518204840M451001760516301624
180018291820211520204844M451101960518331824
200020322020232522304848M451202170520362024

Flange EN 1092-1 Type 11 Weight


Normal Size Of Steel PipeDimensions In MillimeterEN 1092-1 Type 11 Flanges Weight In Kilogram
Normal Size Of Steel Pipe In InchesSize In MillimeterEN 1092 1 Type 11 Flanges
Outer Daimeter (O.D.) In
(MM)
EN 1092 Type 11 Flanges
Wall Thickness Of
(D)
In M)
(EN 1092-1 Type 11 Flanges)
1/21588.911.20.4
3/42098.612.70.6
12510814.20.9
1 1/432117.315.71.2
1 1/24012717.51.5
250152.419.12.4
2 1/265177.822.43.9
380190.523.94.9
3 1/290215.923.96.2
4100228.623.97.0
512525423.98.6
6150279.425.411.3
8200342.928.419.6
10250406.430.228.6
12300482.631.843.2
14350533.435.158.1
16400596.936.676.1
1845063539.693.7
20500698.542.9122.0

EN 1092 Slip On Flange Wall Thickness


NPSOuter Diameter
(O.D)
Minimum Wall Thickness
(T)
(RF) Diameter
(R)
Number of Bolt HolesHoles DiameterBC
(Bolt Circle)
SO Bore Inner Diameter
(SB)
WN Bore Inner Diameter
(WB)
Diameter Hub Base
(HB)
Diameter of Hub Top
(HT)
SO Length
(SL)
WN Length
(WL)
123.500.381.3840.622.380.880.621.190.840.561.81
343.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
1144.620.562.5040.623.501.701.382.311.660.752.19
1125.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
2127.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
3128.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

EN 1092 Blind Flange Sizes


Normal Pipe Size

DN

1/2

15

3/4

20

1

25

1 1/4

32

 1 1/2

40

2

50

2 1/2

65

3

80

4

100


DIN EN 1092-1 PN6 Flange Bolt Holes Number


Normal Pipe Size
(in inch)
EN 1092-1 PN6 Flanges
Dia. of
Flange
( in inch)
No.
of
Bolts
Dia. of
Bolts
(in inch)
Dia. of
Bolt Holes
(in inch)
Bolts
Circle (B.C)
(in inch)
1/43-3/841/20.622-1/4
1/23-1/241/20.622-3/8
3/43-7/841/20.622-3/4
14-1/441/20.623-1/8
1-1/44-5/841/20.623-1/2
1-1/2541/20.623-7/8
2645/80.754-3/4
2-1/2745/80.755-1/2
37-1/245/80.756
3-1/28-1/285/80.757
4985/80.757-1/2
51083/40.888-1/2
61183/40.889-1/2
813-1/283/40.8811-3/4
1016127/8114-1/4
1219127/8117
14211211.1218-3/4
1623-1/21611.1221-1/4
1825161-1/81.2522-3/4
2027-1/2201-1/81.2525
2432201-1/41.3829-1/2

EN 1092-1 Loose Flange Diameter And Drilling


Nominal Pipe DiameterPressure Rating In (PN)
Size Of **Nominal BSP PipePN 6PN 10PN 16PN 25PN 40

DN 10

75

90

90

90

90

O.D.

3/8"

50

60

60

60

60

PCD (B.C.)

 

4 x 11

4 x 14

4 x 14

4 x 14

4 x 14

# of holes x diameter of holes

DN 15

80

95

95

95

95

O.D.

1/2"

55

65

65

65

65

PCD (B.C.)

 

4 x 11

4 x 14

4 x 14

4 x 14

4 x 14

# of holes x diameter of holes

DN 20

90

105

105

105

105

O.D.

3/4"

65

75

75

75

75

PCD (b.c.)

 

4 x 11

4 x 14

4 x 14

4 x 14

4 x 14

# of holes x diameter of holes

DN 25

100

115

115

115

115

O.D.

1"

75

85

85

85

85

PCD (b.c.)

 

4 x 11

4 x 14

4 x 14

4 x 14

4 x 14

# of holes x diameter of holes

DN 32

120

140

140

140

140

O.D.

1 1/4"

90

100

100

100

100

PCD (b.c.)

 

4 x 14

4 x 18

4 x 18

4 x 18

4 x 18

# of holes x diameter of holes

DN 40

130

150

150

150

150

O.D.

1 1/2"

100

110

110

110

110

PCD (b.c.)

 

4 x 14

4 x 18

4 x 18

4 x 18

4 x 18

# of holes x diameter of holes

DN 50

140

165

165

165

165

O.D.

2"

110

125

125

125

125

PCD (b.c.)

 

4 x 14

4 x 18

4 x 18

4 x 18

4 x 18

# of holes x diameter of holes

DN 65

160

185

185

185

185

O.D.

2 1/2"

130

145

145

145

145

PCD (b.c.)

 

4 x 14

4 x 18

4 x 18

8 x 18

8 x 18

# of holes x diameter of holes

DN 80

190

200

200

200

200

O.D.

3"

150

160

160

160

160

PCD (b.c.)

 

4 x 18

8 x 18

8 x 18

8 x 18

8 x 18

# of holes x diameter of holes

DN 100

210

220

220

235

235

O.D.

4"

170

180

180

190

190

PCD (b.c.)

 

4 x 18

8 x 18

8 x 18

8 x 22

8 x 22

# of holes x diameter of holes

DN 125

240

250

250

270

270

O.D.

5"

200

210

210

220

220

PCD (b.c.)

 

8 x 18

8 x 18

8 x 18

8 x 26

8 x 26

# of holes x diameter of holes

DN 150

265

285

285

300

300

O.D.

6"

225

240

240

250

250

PCD (b.c.)

 

8 x 18

8 x 22

8 x 22

8 x 26

8 x 26

# of holes x diameter of holes

DN 175

 

315

315

330

350

O.D.

7"

 

270

270

280

295

PCD (b.c.)

 

 

8 x 22

8 x 22

12 x 26

12 x 30

# of holes x diameter of holes

DN 200

320

340

340

360

375

O.D.

8"

280

295

295

310

320

PCD (b.c.)

 

8 x 18

8 x 22

12 x 22

12 x 26

12 x 30

# of holes x diameter of holes

DN 250

375

395

405

425

450

O.D.

10"

335

350

355

370

385

PCD (b.c.)

 

12 x 18

12 x 22

12 x 26

12 x 30

12 x 33

# of holes x diameter of holes

DN 300

440

445

460

485

515

O.D.

12"

395

400

410

430

450

PCD (b.c.)

 

12 x 22

12 x 22

12 x 26

16 x 30

16 x 33

# of holes x diameter of holes

DN 350

490

505

520

555

580

O.D.

14"

445

460

470

490

510

PCD (b.c.)

 

12 x 22

16 x 22

16 x 26

16 x 33

16 x 36

# of holes x diameter of holes

DN 400

540

565

580

620

660

O.D.

16"

495

515

525

550

585

PCD (b.c.)

 

16 x 22

16 x 26

16 x 30

16 x 36

16 x 39

# of holes x diameter of holes

DN 500

645

670

715

730

755

O.D.

20"

600

620

650

660

670

PCD (b.c.)

 

20 x 22

20 x 26

20 x 33

20 x 36

20 x 42

# of holes x diameter of holes

DN 600

755

780

840

845

 

O.D.

24"

705

725

770

770

 

PCD (b.c.)

 

20 x 24

20 x 27

20 x 33

20 x 36

 

# of holes x diameter of holes


EN 1092-1 Weld Neck Flange Manufacturing Process


EN 1092-1 Weld Neck Flange Manufacturing Process

Raw Material

  • Raw Materia
  • Materia Dimension And Visual
  • Materia Quantity
EN 1092-1 Weld Neck Flange Manufacturing Process

Inspection

  • Chemical And Mechanical Analysis
  • Analysis Of Preservation Certificate
EN 1092-1 Weld Neck Flange Manufacturing Process

Cutting

  • Cut Surface
  • Marking
  • Weight Measuring
EN 1092-1 Weld Neck Flange Manufacturing Process

Forging Flange

  • Grade Of Material
  • Control Flange Temperature
EN 1092-1 Weld Neck Flange Manufacturing Process

Heat Treatment

  • Flange Solution Treatment
  • Flanges Mechanical Test
  • Normalizing
EN 1092-1 Weld Neck Flange Manufacturing Process

Forging Rolling Of Flange

  • Check Dimension
  • Check Marking
  • Check Weight
EN 1092-1 Weld Neck Flange Manufacturing Process

Final Inspection Of Pipe Flange

  • Test Of Visual
  • Test Of Nondestructive
EN 1092-1 Weld Neck Flange Manufacturing Process

Rust Prevention

  • View Preserve
  • Marking
  • Heat Number
EN 1092-1 Weld Neck Flange Manufacturing Process

Packaging

  • Specification Of Packing
  • Inspection Of Packing
  • Delivery Time And Day

EN 1092-1 Type 05 Blind Flanges Installation


EN 1092-1 Type 05 Blind Flanges Installation
heck Surface Finish of EN 1092-1 TYPE 12 Hubbed slip-on flange and EN 1092-1 TYPE 13 Hubbed threaded flange Material for selection of gaskets

Surface Finish Of EN 1092-1 RF Flange


Surface Finish Of EN 1092-1 RF Flange
Normal Pipe Size (A) (B)
1/2 3.0 1.5
3/4 3.0 1.5
1 3.0 1.5
1-1/4 3.0 1.5
1-1/2 3.0 1.5
2 3.0 1.5
2-1/2 3.0 1.5
3 4.5 1.5
3-1/2 6.0 3.0
4 6.0 3.0
5 6.0 3.0
6 6.0 3.0
8 8.0 4.5
10 8.0 4.5
12 8.0 4.5
14 8.0 4.5
16 10.0 4.5
18 12.0 6.0
20 12.0 6.0
22 12.0 6.0
24 12.0 6.0

EN 1092-1 Type 01 PN 16 Plate Flange Dimensions


EN 1092-1 Type 01 PN 16 Plate Flange Dimensions

DN SizeOD Of Pipe, (A)Outside Diameter Of (D) Bolt Circle Diameter Of, (K)Bolt Hole Diameter, LNumber of boltsBolts Size Wall Thickness Of Flange, (C)Raised Face Diameter, (D)Raised Face Height, (F1)Diameter Of Bore, (B)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.214906014 4M121440 2 18 15
1521.3189565144M12144522219
2026.92510575144M121658227.526
2533.73211585144M121668234.533
3242.438140100184M161878243.539
4048.345150110184M161888349.546
5060.357165125184M1620102361.559
6576.179185145188M1620122377.578
8088.989200160188M1620138390.591
100114.3108220180188M16221583116110
125139.7133250210188M16221883141.5135
150168.3159285240228M20242123170.5161
200219.12193402952212M20262683221.5222
2502732734053552612M24293203276.5276
300323.93254604102612M24323784327.5328
350355.63775204702616M24354384359.5380
400406.44265805253016M27384904411430
4504574806405853020M27425504462484
5005085307156503320M30466104513.5534
6006106308407703620M33557255616.5634
7007117209108403624M33637955715724
80081382010259503924M36749005817824
900914920112510503928M368210005918924
100010161020125511704228M39901115510201024
120012191220148513904832M45951330512231224
140014221420168515904836M451031530514261424
160016261620193018205640M521151750516301624
180018291820213020205644M521261950518331824
200020322020234522306248M561382150520362024

Manufacturer of EN 1092-1 TYPE 32 Weld-on collar plate and EN 1092-1 TYPE 33 Short collar in RJ, RTJ, Groove, Male, Flat, Female, Raised, Tongue face

EN 1092-1 Type 01 PN 25 Plate Flange Dimensions


EN 1092-1 Type 01 PN 25 Plate Flange Dimensions

DN SizeOD Of Pipe, (A)Outside Diameter Of (D) Bolt Circle Diameter Of, (K)Bolt Hole Diameter Of (L)Number of boltsBolts Size Wall Thickness Of Flange, (C)Raised Face Diameter, (D)Raised Face Height, (F1)Diameter Of Bore, (B)
Series ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.214906014 4M121440 2 18 15
1521.3189565144M12144522219
2026.92510575144M121658227.526
2533.73211585144M121668234.533
3242.438140100184M161878243.539
4048.345150110184M161888349.546
5060.357165125184M1620102361.559
6576.179185145188M1622122377.578
8088.989200160188M1624138390.591
100114.3108235190228M20261623116110
125139.7133270220268M24281883141.5135
150168.3159300250268M24302183170.5161
200219.12193603102612M24322783221.5222
2502732734353703012M27353353276.5276
300323.93254854303016M27383954327.5328
350355.63775554903316M30424504359.5380
400406.44266205503616M33485054411430
4504574806706003620M33545554462484
5005085307306603620M33586154513.5534
6006106308457703920M36687205616.5634
7007117209608754224M39858205715724
80081382010859904824M45959305817824

EN 1092-1 Type 05 PN 10 Blind Flange Dimensions


EN 1092-1 Type 05 PN 10 Blind Flange Dimensions

DN (Size)Outside Diameter Of (D)Bolt Circle Diameter, (K)Bolt Hole Diameter, (L)Number of boltBolts SizeWall Thickness Of Flange (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16181023
65185145188M16181223
80200160188M16201383
100220180188M16201583
125250210188M16221883
150285240228M20222123
200340295228M20242683
2503953502212M20263203
3004454002212M20263704
3505054602216M20264304
4005655152616M24264824
4506155652620M24285324
5006706202620M24285854
6007807253020M27346855
7008958403024M27388005
80010159503324M30489055
900111510503328M305010055
1000123011603628M335411105
1200145513803932M366613305
1400167515904236M397215355
1600191518204840M458217605
1800211520204844M459219605
2000232522304848M4510021705

EN 1092-1 Type 05 PN 16 Blind Flange Dimensions


EN 1092-1 Type 05 PN 16 Blind Flange Dimensions

DN (Size)Outside Diameter Of (D)Bolt Circle Diameter, (K)Bolt Hole Diameter, (L)Number of boltBolts SizeWall Thickness Of Flange (C)Raised Face Diameter Of (D)Raised Face Height Of (F1)
109060144M1216402
159565144M1216452
2010575144M1218582
2511585144M1218682
32140100184M1618782
40150110184M1618883
50165125184M16181023
65185145188M16181223
80200160188M16201383
100220180188M16201583
125250210188M16221883
150285240228M20222123
2003402952212M20242683
2504053552612M24263203
3004604102612M24283784
3505204702616M24304384
4005805253016M27324904
4506405853020M27405504
5007156503320M30446104
6008407703620M33547255
7009108403624M33587955
80010259503924M36629005
900112510503928M366410005
1000125511704228M396811155
1200148513904832M458613305
1400168515904836M459415305
1600193018205640M5211217505
1800213020205644M5212119505
2000234522306248M5613621505

EN 1092-1 Type 13 PN 6 Threaded Flange Dimensions


EN 1092-1 Type 13 PN 6 Threaded Flange Dimensions

DN (Size)OD Of Pipe, (A)Outside Diameter (O.D.) Of (D)Bolt Circle Diameter Of (K)Bolt Hole Diameter Of (L)bolts NumberRaised Face Diameter Of (D)Raised Face Height Of (F1)Wall Thickness Of Flange, (C)Flange Length Of HDiameter Of Neck (N)Corners Radius (R)
1017.2755011 435 2 1220 254
1521.380551144021220304
2026.990551145021421404
2533.7100751146021424504
3242.4120951447021426606
4048.31301001448031426706
5060.31401101449031428806
6576.1460130144110314321006
8088.9190150184128316341108
100114.3210170184148316401308
125139.7240200188178318441608
150168.32652251882023184418510
200219.13202801882583204424010
25027337533518123123224429512
300323.944039522123654224435512

EN 1092-1 Type 13 PN 16 Threaded Flange Dimensions


EN 1092-1 Type 13 PN 16 Threaded Flange Dimensions

DN (Size)OD Of Pipe, (A)Outside Diameter (O.D.) Of (D)Bolt Circle Diameter Of (K)Bolt Hole Diameter Of (L)bolts NumberRaised Face Diameter Of (D)Raised Face Height Of (F1)Wall Thickness Of Flange, (C)Flange Length Of HDiameter Of Neck (N)Corners Radius (R)
1017.2906014 440 2 1622 304
1521.395651444521622354
2026.9105751445821826454
2533.7115851446821828524
3242.41401001847821830606
4048.31501101848831832706
5060.316512518410231828846
6576.1185145188122318321046
8088.9200160188138320341186
100114.3220180188158320401408
125139.7250210188188322441688
150168.32852402282123224419510
200219.134029322122683244424610
25027340535526123203264639812
300323.946041026123784284635012
350355.652047026164384306740012
400406.458052530164904326345612
45045764058530205504346850212
50050871565033206104 7355712
60061084077036207235 8365812

EN 1092-1 – PN10 Hubbed Slip On Flanges Dimensions


EN 1092-1 – PN10 Hubbed Slip On Flanges Dimensions

DN (Size)OD Of Pipe (A)Outside Diameter Of (D)Bolt Circle Diameter Of (K)Bolt Hole Diameter Of (L)Number of boltRaised Face Diameter Of (D)Raised Face Height Of (F1)Wall Thickness Of Flange (C)Flange Length Of (H)Diameter Of Neck (N)Corners Radius (R)Diameter Bore Of (B)
Series ⅠSeries ⅡSeries ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.214906014 4402 16223041815
1521.318956514445216223542219
2026.92510575144582182645427.526
2533.73211585144682182852434.533
3242.438140100184782183060643.539
4048.345150110184883183270649.546
5060.3571651251841023182884661.559
6576.17918514518812231832104677.578
8088.98920016018813832034118690.591
100114.3108220180188158320401408116110
125139.7133250210188188322441688141.5135
150168.31592852402282123224419510170.5161
200219.12193402952282683244424610221.5222
25027327339535022123203264629812276.5276
300323.932544540022123704264635012327.5328
350355.637750546022164304265340041212359.5380
400406.442656551526164824265745646512411430
45045748061556526205324286350251512462484
50050853067062026205854286755957012513.5534
60061063078072530206855287565867012616.5634

EN 1092-1 – PN16 Hubbed Slip On Flanges Dimensions


EN 1092-1 – PN16 Hubbed Slip On Flanges Dimensions

DN (Size)OD Of Pipe (A)Outside Diameter Of (D)Bolt Circle Diameter Of (K)Bolt Hole Diameter Of (L)Number of boltRaised Face Diameter Of (D)Raised Face Height Of (F1)Wall Thickness Of Flange (C)Flange Length Of (H)Diameter Of Neck (N)Corners Radius (R)Diameter Bore Of (B)
Series ⅠSeries ⅡSeries ⅠSeries ⅡSeries ⅠSeries Ⅱ
1017.214906014 4402 16223041815
1521.318956514445216223542219
2026.92510575144582182645427.526
2533.73211585144682182852434.533
3242.438140100184782183060643.539
4048.345150110184883183270649.546
5060.3571651251841023182884661.559
6576.17918514518812231832104677.578
8088.98920016018813832034118690.591
100114.3108220180188158320401408116110
125139.7133250210188188322441688141.5135
150168.31592852402282123224419510170.5161
200219.121934029522122683244424610221.5222
25027327340535526123203264629812276.5276
300323.932546041026123784284635012327.5328
350355.637752047026164384305740041212359.5380
400406.442658052530164904326345647012411430
45045748064058530205504343850252512462485
50050853071565033206104367355958112513.5535
60061063084077036207255408365867812616.5635
70071172091084036247955408375076912718726
800813820102595039249005419086487112820826
90091492011251050392810005489496897412921927
1000101610201255117042281115559100107210761610231027

Masses Of EN 1092-1 Flange


PN10


EN 1092-1 PN10 Flange Masses

PN16


EN 1092-1 PN16 Flange Masses

PN25


EN 1092-1 PN25 Flange Masses