Monel Alloy Pipe Fittings supplier, Monel Buttweld Pipe Fittings dealers

Monel Pipe Fittings supplier, Monel Buttweld Fittings Supplier

Monel Pipe Fittings

 

Monel Pipe Fittings Specifications

Specification ASTM B366, ASTM SB 366, ASTM B564, ASME SB564, En 2.4816
Dimensions Standards ASME B16.9, ANSI B16.9, ASME B16.28, ANSI B16.28, ANSI B16.25, MSS-SP-43, MSS-SP-75
Size Range Monel Seamless Butt Weld Fittings: 1/2″ – 10″
Monel Welded Butt Weld Fittings: 1/2″ – 48″
Wall Thickness 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80, STD, 60, 80, XS, 100, 120, 140, 160 Sch XXS
Type Seamless / Welded / ERW/ Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)
Surface treatment Sand Rolling, Sand Blasting, Acid Cleaning
Delivery Detail 2 TO 3 WEEKS AFTER WE RECEIVED YOUR DEPOSIT
Packaging Details HIGH QUALITY EXPORT BRANDING , PACKAGING & LABELLING
Nickel Alloy Butt Weld Fittings Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825 ), UNS 6600(INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3)
Material Test Certificate As per EN 10204 3.1 and 10204 3.2, NACE MR10103 and NACE MR0175 certified Test Certificates

Types of Monel Alloy Pipe Fittings

Monel Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min

Monel Pipe Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %

Monel Buttweld Pipe Fittings Weight Chart & Dimensions

NPS LBS KG
2-1½ 1.3 0.59
2-1¼ 1.2 0.54
2-1 1.1 0.5
2-3/4
2½-2 2.45 1.11
2½-1½ 2.2 1
2½-1¼ 2.1 0.95
2½-1
3-2½ 4.15 1.88
3-2 3.5 1.59
3-1½ 3.2 1.45
3-1¼
3½-3 6 2.72
3½-2½ 5.4 2.45
3½-2 4.5 2.04
3½-1½
3½-1¼
4-3½ 8.2 3.72
4-3 7.5 3.4
4-2½ 10.5 4.76
4-2 5.95 2.7
4-1½
5-4 13.1 5.94
5-3½ 12.2 5.53
5-3 11.4 5.17
5-2½ 10.5 4.76
5-2
6-5 20.7 9.39
6-4 18.4 8.35
6-3½ 17.3 7.85
6-3 16.4 7.44
6-2½
8-6 39.2 17.78
8-5 35.5 16.1
8-4 32.4 14.7
8-3½
10-8 71.2 32.3
10-6 61.2 27.76
10-5 56.7 25.72
10-4
12-10 111.5 50.58
12-8 96.5 43.77
12-6 84.7 38.42
NPS LBS KG

Monel 90° Elbow manufacturer in India

Monel 90 degree pipe elbow manufacturerMonel 90 degree pipe elbow suppliers, Monel Elbows

Monel 90 degree elbow is a type of Monel Pipe Fitting which you can used to change the flow direction in a 90 degree. It is also called “Monel 90 Bend” or “Monel Quarter Bend”. As a joint between two pipes, the 90 degree elbows are also used as a railing ends or corners on a level installation. Monel 90° Elbows are made of Monel seamless tubes within the diameter range of DN 15 – DN 1000.

Monel 90 Degree butt weld elbows generally conform to ASTM B366 with dimensional tolerances in accordance with MSS SP-43 for schedules 5s and 10s, and with ANSI B16.9 for schedules heavier than 10s.

Monel Elbows other trade name: Monel Alloy Elbow, ASTM B366 Monel Elbow, Monel Alloy Elbow, Monel Pipe Elbow

Monel Elbow 45° manufacturer in India

Monel 45 Degree Elbows manufacturerMonel 45 Degree Elbows suppliers

Monel 45 degree elbow is the Monel elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. Monel 45° Elbows are made of Monel Seamless Tubes within the diameter range of DN 15 – DN 1000.

The Monel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Monel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. Monel 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe. The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the Monel butt weld elbow is a major dimension of the pipe. A pipe’s outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter’s (ID) bore size that is reduced as the schedule or wall thickness increases.

Monel 180° Returns manufacturer in India

Monel 180° Returns manufacturerMonel 180 Degree Returns suppliers

The recommended procedure for a 180 change in direction is to use a formed 180 return fitting rather than combine two 90 elbows or field fabricate a 180 pipe bend from a straight pipe piece. Monel Returns are used primarily in heater coils and heat exchangers. The number of coils the space has available determines whether a short or long radius return is desirable. All Monel long and short 180 radius returns have center-to center dimensions that are double those of matching 90 elbows.

  • ASTM B366 Monel 180° Long Radius Return
  • ASTM B366 Monel 180° Short Radius Return

Materials: ASTM B366/ ASME SB366

Monel Reducing Tee manufacturer in India, Monel Reducing Pipe Tee manufacturer

Monel Reducing Tee manufacturerMonel Reducing Tee suppliers, Monel Tee distributor

A tee is a branched, reinforced outlet fitting that permits flow at 90 to the main flow. The main flow passes through the run of the tee. The 90 outlet is called the branch of the tee. Monel straingt tee is manufactured with all three outlets, the run as well as the branchm the same size. Monel reducing tee is made with the branch outlet smaller than the run to accoomodate the design flow rate.

  • ASTM B366 Monel Stright Tee
  • ASTM B366 Monel Reducing Tee

Materials: ASTM B366/ ASME SB366 Monel

Monel Tee manufacturer in India, Monel Equal Tee Manufacturer

Monel Tee manufacturerMonel Pipe Tee suppliers

Our Monel butt weld pipe tees include Monel butt weld straight tees and Monel butt weld reducing tees. Monel tees are available within the range of DN 15 – DN 600. Our Monel butt weld reducing tees meet strict certifications required on current piping systems with qualities of high strength and SS corrosion resistance for use in various industries and environments.

The most common pipe fitting is an pipe tee or specifically an Monel straight pipe tee. Monel Tees have two outlets at 90 degrees from the main flow and are used to combine or split fluid or gas flow. Monel Tees connect and combine pipe systems or they can connect various size pipes together with reducing tees. Monel reducing tee can connect various sizes of pipes together in one pipe system.

Monel Concentric Reducers manufacturer in India, Monel Reducer Manufacturer

Monel Concentric Reducers manufacturerMonel Pipe Reducer/ Reducers suppliers

Looking for Monel Reducers in specific standards & size at Factory Rate?

We can manufacture two kinds of Monel pipe reducer: Monel concentric reducer and Monel eccentric reducer. Which are commonly used to change the pipe size or pressure in a piping system. Monel reducers are made of Monel seamless tube within the range of DN 15 – DN 1000.

Monel butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. Monel eccentric butt welding reducer is a type of Monel pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting. Monel concentric butt welding reducer works the same way, but resembles a cone and keeps fluid or gas more centered, whereas Monel eccentric reducers have a parallel edge, which results in an offsetting center. Monel Eccentric butt weld reducers are used if the same top or bottom level of the pipe is required.

Materials: ASTM B366/ ASME SB366 Monel

Monel Eccentric Reducers manufacturer in India

Monel Eccentric Reducers manufacturerMonel Eccentric Pipe Reducer/ Reducers suppliers

Looking for Monel Eccentric Reducers in specific standards & size at Factory Rate?

The eccentric reducer has the reducing outlet end off center. It will line up straight with one side of the inlet but not with the other outlet. This reducer is harder to manufacture than the concentric reducer and costs more.

Materials: ASTM B366/ ASME SB366 Monel

 

 

Monel Long Radius LR Elbows manufacturer in India, Monel LR Elbows manufacturer

Monel LR Elbows manufacturerMonel Long Radius Pipe Elbows suppliers

Generally, their size designations are either long radius or short radius. The Monel long radius elbow is usually adequate for standard service conditions. The center-to-end dimension is always 1-1/2 times the nominal size of the elbow. Monel Short radius elbows have a center-to-end measurement equl to pipe diameter.

Monel long radius elbow costs less than a short radius fittings. Monel Long radius elbows offer minimum resistance to flow consistent with space savings and presently account for more than 90 percent of all elbows in use.

  • ASTM B366 Monel 45° Long Radius Elbow
  • ASTM B366 Monel 90° Long Radius Elbow
  • ASTM B366 Monel 180° Long Radius Elbow

Materials: ASTM B366/ ASME SB366 Monel

Monel Short Radius SR Elbows manufacturer in India, Monel SR Elbows manufacturer

Monel Short Radius Elbows manufacturerMonel Short Radius Pipe Elbows Suppliers

When in piping system space is limited and the flow rate is non-critical, an Monel short radius elbow is often selected. When fluids are moved long distances or must encounter many directinal changes, Monel short radius elbows are not recommended because of their greater friction loss, which may require installation of larger pumping equipment.

  • ASTM B366 Monel 45° Short Radius Elbow
  • ASTM B366 Monel 90° Short Radius Elbow
  • ASTM B366 Monel 180° Short Radius Elbow

Materials: ASTM B366/ ASME SB366 Monel

Monel Pipe Cap Supplier, Monel End Cap manufacturer

Monel Pipe Cap manufacturerMonel Pipe Cap/ End Cap suppliers

Monel Heads/ Pipe Cap are available within the range of DN 15 – DN 500. Our high-quality and corrosion resistant Monel butt weld caps come in various sizes and schedules to fit your Monel pipe and fitting needs.

Monel butt weld cap is a type of Monel Pipe Fitting that covers the end of a pipe. Since it can have female threads, it can screw on to the male end of the pipe. It can also be welded on to close the end of the pipe. On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the pipe cap can be cut off and the pipe system extended as needed. This way you will not have less pipe than you need and the new fitting can be attached correctly.

Monel End Caps: cap, Seamless cap, Steel cap, Monel Seamless cap, pipe cap, cap end

  • ASTM B366 Monel Seamless cap
  • ASTM B366 Monel Erw cap
  • ASTM B366 Monel Large size cap
  • ASTM B366 Monel Small size cap

Materials: ASTM B366/ ASME SB366 Monel

Monel Stub End manufacturer in India, Monel Stub Ends manufacturer

Monel Stub End manufacturers in IndiaMonel Stub End suppliers

These Monel Pipe Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe. Normally, Monel stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Monel Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Monel Stub Ends End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Materials: ASTM B366/ ASME SB366 Monel

Monel Cross manufacturer in India, Monel Pipe Cross manufacturer

Monel Cross manufacturers in IndiaMonel Pipe Cross suppliers

We can supply Monel pipe cross in two types namely, straight cross and reducing cross in a complete range of shapes and dimensions. We are a leading supplier of Monel cross tee to domestic customers and international customers in various industries such as oil and gas, petrochemical, power generation, pharmaceuticals, paper manufacturing, natural gas industry and chemical plants. Monel Cross is used in many applications, as a junction for intersecting pipes.

Outside Diameter: Seamless Cross Fitting ( 1/2"-24"), ERW / Welded / Fabricated Cross Fitting (1/2"-48")

Type: Monel Seamless, Welded, Equal Cross, Reducing Cross

Materials: ASTM B366/ ASME SB366 Monel

Monel Pipe Fittings Price in India

  • Forge steel Monel butt weld pipe fitting FOB Price: US $1-10 / Piece
  • DN 450 sch5 Monel schedule 40 steel pipe fitting with plain end FOB Price: US $1-99 / Piece
  • Monel Pipe Fitting 90d Elbow Lr Bw Smls FOB Price: US $0.1-100 / Piece
  • Monel butt welded pipe fittings FOB Price: US $700-800 / Ton
  • Monel steel pipe fitting 90d elbow lr bw smls FOB Price: US $0.015-70 / Piece
  • Monel forged fitting FOB Price: US $1-10 / Piece
  • Angle 45 pipe fitting Monel ASTM seamless type FOB Price: US $0.1-500 / Piece
  • Monel Pipe Fitting 180 Degree Elbow FOB Price: US $1-8800 / Piece
  • Good price Butt Welding Monel pipe fitting FOB Price: US $6-236 / Piece
  • ASTM ASME SB366 Gr Monel Elbow/pipe fittings FOB Price: US $1-50 / Piece
  • B366 Monel Pipe Fittings,butt welded pipe fittings,elbow,tee,reducer,cap etc FOB Price: US $0.1-1000 / Piece
  • PIPE FITTINGS ASTM B16.9 B366 MONEL EQUAL TEE FOB Price: US $499.0-500.0 / Units
  • Monel pipe fitting FOB Price: US $1-200 / Piece
  • B366 gr Monel elbow fittings 45 degree elbow FOB Price: US $1-100 / Piece
  • Alloy Monel Elbow Pipe Fitting ASME B16.9 10 Pieces (Min. Order)
  • Seamless welded Monel fittings FOB Price: US $1-800 / Piece
  • Monel tube fitting FOB Price: US $1600-2400 / Metric Ton
  • ASTM B366 Alloy Monel pipe cap FOB Price: US $1-999 / Piece
  • Monel 90 deg BW 3" sch 80 Monel seamless elbow FOB Price: US $0.1-200 / Piece
  • ANSI B16.25 B366 Monel SCH 10 API 45 degree pipe fitting lateral tee FOB Price: US $0.5-150 / Piece
  • Monel SEAMLESS TEE Monel pipe fitting reducer elbow tee FOB Price: US $0.1-1 / Piece
  • Butt weld Monel pipe end cap FOB Price: US $0.1-100 / Piece
  • Monel butt welding tee FOB Price: US $1-1000 / Tonne
  • Monel ELBOW 45 deg , LR BW SMLS SCH 80S FOB Price: US $1.0 / Piece
  • ECC.REDUCER Monel FOB Price: US $500-1500 / Ton
  • Monel induction elbows Steel elbow FOB Price: US $0.14-999 / Piece
  • Monel Reducer Eccentric/Concentric FOB Price: US $1-5000 / Piece
  • Monel Pipe Fittings Monel Elbow FOB Price: US $0.9-99 / Piece
  • Monel seamless pipe fitting astm B366 FOB Price: US $0.072-70 / Piece
  • Monel equal tee pipe fittings FOB Price: US $6-236 / Piece
  • Monel bw tube fittings FOB Price: US $0.1-1000 / Piece
  • ASTM B366Monel pipe fitting 90deg elbow FOB Price: US $1-400 / Piece
  • Seamless Monel pipe fitting FOB Price: US $0.5-500 / Piece
  • Monel 45 degree pipe fitting lateral y tee for power generation FOB Price: US $0.5-150 / Piece
  • Monel 90d Elbow FOB Price: US $0.1-100 / Piece
  • ASTM B366 Monel pipe cap FOB Price: US $10-100 / Piece
  • Monel butt welding tee FOB Price: US $1-1000 / Tonne
  • High quality Monel elbow FOB Price: US $0.5-10000 / Piece
  • Butt welding ASTM B16.9 B366 Monel concentric reducer FOB Price: US $400-900 / Ton
  • Butt weld Monel pipe fitting FOB Price: US $1-10 / Piece
  • Monel elbow pipe fitting FOB Price: US $6-236 / Piece
  • ButtWeld Fittings Monel Pipe Fittings FOB Price: US $0.1-10 / Piece
  • Monel elbow FOB Price: US $0.1-300 / Piece