MSS-SP-43 Fittings | MSS SP-43 Type A/ B Stub End Dimensions

Table Of Content:

MSS-SP-43 Fittings Specifications
MSS Sp 43 Stub End Price
Types Of MSS Sp-43 Type A Stub End
MSS Sp-43 Type A Stub End Dimensions
MSS Sp-43 Type B Stub End Dimensions Chart
MSS-SP-43 Wrought Stub End Tolerances
Mss-SP-43 Fabricated Stub End Size Chart
Different Ends Finishing Of MSS SP 43 Stub End
MSS-SP-43 Fittings Wall Thickness
Application Of MSS SP 43 Buttwelding Fittings
Outside Daimeter of MSS SP-43 Type B Stub End
Marking On MSS SP-43 Type A Stub End
MSS SP-43 Type B Stub End Schedule & Weight
Pattern Type Of Mss Sp-43 Stub Ends

MSS SP-43 Type A Stub End Manufacturer in India, Refer Specifications

MSS-SP-43 Fittings Specifications

Size Range :

Buttweld : 1/2″ – 26″
Seamless : 1/2″ – 48″
Welded : 24 – 96″

Common Thickness :

SCH XS & XXS
SCH 20, 40, 60, 80
SCH 100, 120, 140

International Standard :

ASME B16.9
ASME B16.28

Forming Types :

Hot formed
Cold formed

Applicable Fluids

Air
Water
Oil and Gas
Steam

Types Of Packaging

Wooden Pallet
Wooden Cases
Carton Box

Contact directly a MSS-SP-43 Stub End Supplier for fast delivery and lowest price in Mumbai

MSS Sp 43 Stub End Price

Type = Stub End
Grade = ASTM A403 WP316L

Size In Inch	SCH	Price In US$ (Dollar) per unit	Price in UAE Dirham (AED) per unit
2	XS	US $5.32	19.54
4	XS	US $8.21	30.16
6	XS	US $11.30	41.50
8	XS	US $16.36	60.09
10	XS	US $19.60	71.99

Why pay extra? Buying from MSS-SP-43 Type B Stub End Stockist saves your cost, View Available Types and Sizes of MSS SP-43 Long Collar Stub End

Types Of MSS Sp-43 Type A Stub End

Mss Sp-43 Type A Stub End

Mss Sp-43 Type B Stub End

Mss Sp-43 Stub End

Mss-sp-43 Short Stub End

Mss-sp-43 Long Stub End

Mss Sp-43 Type A Long Stub End

Mss Sp-43 Type B Short Stub End

Mss Sp 43 Butt Welding Fittings

Mss-sp-43 Wrought Fittings

Mss-sp-43 Fabricated Fittings

Mss Sp-43 Fabricated Butt-welding Fittings

Mss-sp-43 Stub Ends for Flanged Joints

MSS SP-43 Stainless Steel Short Stub Ends

MSS SP-43 Type A 304 Long Stub Ends

MSS SP-43 type A 304L Stub End

MSS SP-43 type B 316 Stub End

MSS SP-43 Buttweld 316L Long Stub End

MSS SP-43 Stainless Steel 317 Stub End

MSS SP-43 type A Stainless 321 Stub End

MSS SP-43 Type A SS 347 Stub End

MSS SP-43 type B SS 904L Stub End

Check Dimensions Of MSS SP-43 type A Long/ Short Stub End for Lap Joint in NPS 1/2 - NPS 24, Tolerances & Wall Thickness

MSS Sp-43 Type A Stub End Dimensions

Normal Pipe Size	Outer Diameter	(T)	(G)	(F)	(R) Type A	R Type B
1/2	21.3	2.11	34.9	50.8	3.05	0.76
3/4	26.7	2.11	42.9	50.8	3.05	0.76
1	33.4	2.77	50.8	50.8	3.05	0.76
1.1/4	42.2	2.77	63.5	50.8	4.83	0.76
1.1/2	48.3	2.77	73	50.8	6.35	0.76
2	60.3	2.77	92.1	63.5	7.87	0.76
2.1/2	73	3.05	104.8	63.5	7.87	0.76
3	88.9	3.05	127	63.5	9.65	0.76
3.1/2	101.6	3.05	139.7	76.2	9.65	0.76
4	114.3	3.05	157.2	76.2	11.18	0.76
5	141.3	3.40	185.7	76.2	11.18	1.52
6	168.3	3.40	215.9	88.9	12.7	1.52
8	219.1	3.76	269.9	101.6	12.7	1.52
10	273.1	4.19	323.9	127	12.7	1.52
12	323.9	4.57	381	152.4	12.7	1.52
14	355.6	4.78	412.8	152.4	12.70	1.52
16	406.4	4.78	469.9	152.4	12.7	1.52
18	457.2	4.78	533.4	152.4	12.70	1.52
20	508	5.54	584.2	152.4	12.70	1.52
24	609.6	6.35	692.2	152.4	12.7	1.52

MSS-SP-43 Fittings Test Certificates

100% Radiography Test Report
Raw Materials Certificate
Third Party Inspection Repor
EN 10204/3.1B,

MSS Sp-43 Type B Stub End Dimensions Chart

Normal Pipe Size	Outside Diameter	(T)	(G)	(F)	(R)	Kilogram
1/2	21.3	2.11	34.9	50.8	3.18	0.07
3/4	26.7	2.11	42.9	50.8	3.18	0.10
1	33.4	2.77	50.8	50.8	3.18	0.16
1¼	42.2	2.77	63.5	50.8	4.76	0.22
1½	48.3	2.77	73	50.8	6.35	0.25
2	60.3	2.77	92.1	63.5	7.94	0.43
2½	73	3.05	104.8	63.5	7.94	0.57
3	88.9	3.05	127	63.5	9.53	0.73
4	114.3	3.05	157.2	76.2	11.11	1.09
5	141.3	3.40	185.7	76.2	11.11	1.47
6	168.3	3.40	215.9	88.9	12.70	2.15
8	219.1	3.76	269.9	101.6	12.70	3.22
10	273.1	4.19	323.9	127	12.70	5.13
12	323.9	4.57	381	152.4	12.70	8.16
14	355.6	4.78	412.8	152.4	12.70	10.89
16	406.4	4.78	469.9	152.4	12.70	12.70
18	457.2	4.78	533.4	152.4	12.70	17.24
20	508	5.54	584.2	152.4	12.70	21.77
24	609.6	6.35	692.2	152.4	12.70	27.22

MSS-SP-43 Wrought Stub End Tolerances

NPS	1/2 up to 2.1/2	3 to 3.1/2	4	5 to 8	10 to 18	20 to 24
O.D. at Welding End (Outside Diameter)	+ 1.6 - 0.8	1.6	1.6	+ 2.29 - 1.6	+ 4.06 - 3.05	+ 6.35 - 4.83
Overall Length Of ((F))	1.6	1.6	1.6	1.6	2	2
O.D. of Lap ((G))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6
Wall Thickness of Lap ((T))	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0
Lap Fillet Radius of ((R))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6

MSS-SP-43 Stub End Value Added Services

Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test
Hardness Test
Chemical Equipment
Pitting Resistance Test

Positive Material Identification – PMI Testing
Micro and MacroTest
Flattening Test
Mechanical Testing Such as Tensile of Area

Mss-SP-43 Fabricated Stub End Size Chart

Outside Daimeter (O.D.) & Inside Daimeter (I.D.)	(NPS)	Size Of Threads In Inch	List Of Equivalent
5/16	1/16	27	0.313
13/32	1/8	27	0.405
35/64	1/4	18	0.540
43/64	3/8	18	0.675
27/32	1/2	14	0.840
1-3/64	3/4	14	1.050
1-5/16	1	11-1/2	1.315
1-21/32	1-1/4	11-1/2	1.660
1-29/32	1-1/2	11-1/2	1.900
2-3/8	2	11-1/2	2.375
2-7/8	2-1/2	8	2.875
3-1/2	3	8	3.500
4	3-1/2	8	4.000
4-1/2	4	8	4.500

Different Ends Finishing Of MSS SP 43 Stub End

Grooved Ends
Threaded Ends (Male Only)
Flanged Ends
Squared Ends
Beveled Ends

MSS SP-43 type B Stub End for Slip On Flanges available in (ASTM A403 WP304/WP316, A234 WPB/ A420 WPL6), View MSS SP-43 Stainless Steel Stub End Schedule & Weight

MSS-SP-43 Fittings Wall Thickness

Normal Size Of Pipe (DN)	Schedule Number	Wall Thickness inch millmeter	Mass lb/ft kg/m
1/8 6	5S	...	...
1/8 6	10S	0.049 1.24	0.19 0.28
1/8 6	40S	0.068 1.73	0.24 0.37
1/8 6	80S	0.095 2.41	0.31 0.47
1/4 8	5S	...	...
1/4 8	10S	0.065 1.65	0.33 0.49
1/4 8	40S	0.088 2.24	0.43 0.63
1/4 8	80S	0.119 3.02	0.54 0.80
3/8 10	5S	...	...
3/8 10	10S	0.065 1.65	0.42 0.63
3/8 10	40S	0.091 2.31	0.57 0.84
3/8 10	80S	0.126 3.20	0.74 1.10
1/2 15	5S	0.065 1.65	0.54 0.80
1/2 15	10S	0.083 2.11	0.67 1.00
1/2 15	40S	0.109 2.77	0.85 1.27
1/2 15	80S	0.147 3.73	1.09 1.62
3/4 20	5S	0.065 1.65	0.68 1.02
3/4 20	10S	0.083 2.11	0.86 1.28
3/4 20	40S	0.113 2.87	1.13 1.69
3/4 20	80S	0.154 3.91	1.48 2.20
1 25	5S	0.065 1.65	0.68 1.02
1 25	10S	0.083 2.11	0.86 1.28
1 25	40S	0.133 3.38	1.68 2.50
1 25	80S	0.179 4.55	2.17 3.24
1-1/4 32	5S	0.065 1.65	1.11 1.65
1-1/4 32	10S	0.109 2.77	1.81 2.69
1-1/4 32	40S	0.140 3.56	2.27 3.39
1-1/4 32	80S	0.191 4.85	3.00 4.47
1-1/2 40	5S	0.065 1.65	1.28 1.90
1-1/2 40	10S	0.109 2.77	2.09 3.11
1-1/2 40	40S	0.145 3.68	2.72 4.05
1-1/2 40	80S	0.200 5.08	3.63 5.41
2 50	5S	0.065 1.65	1.61 2.39
2 50	10S	0.109 2.77	2.64 3.93
2 50	40S	0.154 3.91	3.66 5.44
2 50	80S	0.218 5.54	5.03 7.48
2-1/2 65	5S	0.083 2.11	2.48 3.69
2-1/2 65	10S	0.120 3.05	3.53 5.26
2-1/2 65	40S	0.203 5.16	5.80 8.63
2-1/2 65	80S	0.276 7.01	7.67 11.41
3 80	5S	0.083 2.11	3.03 4.52
3 80	10S	0.120 3.05	4.34 6.46
3 80	40S	0.216 5.49	7.58 11.29
3 80	80S	0.300 7.62	10.26 15.27
3-1/2 90	5S	0.083 2.11	3.48 5.18
3-1/2 90	10S	0.120 3.05	4.98 7.41
3-1/2 90	40S	0.226 5.74	9.12 13.57
3-1/2 90	80S	0.318 8.08	12.52 18.64
4 100	5S	0.083 2.11	3.92 5.84
4 100	10S	0.120 3.05	5.62 8.37
4 100	40S	0.237 6.02	10.80 16.08
4 100	80S	0.337 8.56	15.00 22.32
5 125	5S	0.109 2.77	6.36 9.46
5 125	10S	0.134 3.40	7.78 11.56
5 125	40S	0.258 6.55	14.63 21.77
5 125	80S	0.375 9.53	20.80 30.97
6 150	5S	0.109 2.77	7.59 11.31
6 150	10S	0.134 3.40	9.30 13.83
6 150	40S	0.280 7.11	18.99 28.26
6 150	80S	0.432 10.97	28.60 42.56

Application Of MSS SP 43 Buttwelding Fittings

Specialty Chemicals
Power Generation
Condensers
Chemical Equipment
Gas Processing
Pulp and Paper Industry

Sea Water Equipment
Pharmaceutical Equipment
Off-Shore Oil Drilling Companies
Petrochemicals
Heat Exchangers
Pharmaceuticals

Outside Daimeter of MSS SP-43 Type B Stub End

Size in mm	Wall Thickness	Outside Daimeter	schedule 10	schedule 20	schedule 30	schedule 40	schedule 80
15 NB	1.65	21.30	2.11	__	2.41	2.77	3.73
20 NB	1.65	26.70	2.11	__	2.41	2.87	3.91
25 NB	1.65	33.40	2.77	__	2.90	3.38	4.55
32 NB	1.65	42.20	2.77	__	2.97	3.56	4.85
40 NB	1.65	48.30	2.77	__	3.18	3.68	5.08
50 NB	1.65	60.30	2.77	__	3.18	3.91	5.54
65 NB	2.11	73.00	3.05	__	4.78	5.16	7.01
80 NB	2.11	88.90	3.05	__	4.78	5.49	7.62
90 NB	2.11	101.60	3.05	__	4.78	5.74	8.08
100 NB	2.11	114.30	3.05	__	4.78	6.02	8.56
125 NB	2.77	141.30	3.40	__	__	6.55	9.53
150 NB	2.77	168.30	3.40	__	__	7.11	10.97
200 NB	2.77	219.10	3.76	6.35	7.04	8.18	12.70
250 NB	3.40	273.00	4.19	6.35	7.80	9.27	15.09
300 NB	3.96	323.80	4.57	6.35	8.38	10.31	17.48
350 NB	3.96	355.60	6.35	7.92	9.53	11.13	19.05
400 NB	4.19	406.40	6.35	7.92	9.53	12.7	21.44
450 NB	4.19	457.00	6.35	7.92	11.13	14.27	23.83
500 NB	4.78	508.00	6.35	9.53	12.70	15.09	26.19
550 NB	4.78	559.00	6.35	9.53	12.70	__	28.58
600 NB	5.54	610.00	6.35	9.53	14.27	17.48	30.96

MSS SP-43 type A Stub End Documentation

Raw Material Test Reports
Fumigation Certificates
Fumigation Certificates
Guarantee Letter

QAP (Quality Assurance Plan)
NABL approved Laboratory Test Reports
Heat Treatment Charts
Commercial Invoice which includes HS Code

Marking On MSS SP-43 Type A Stub End

MSS SP-43 Stub End Marking includes ASME/ ANSI B16.9 Codes:

Standard
Products Name
Schedule
Manufacturer Company Name
Code Of ASTM Material
Grade
Size In Inch

ASME B16.9
MSS SP 43 Type A Stub End
Sch 20
Vishal Steel
Stainless Steel
ASTM A403 WP304
8"

MSS SP-43 Type B Stub End Schedule & Weight

(Normal Size Of Pipe)	Type Of Schedule	Kilogram And St.
1/2 “	10s	0.07
	40s	0.09
3/4 “	10s	0.10
	40s	0.12
1 “	10s	0.16
	40s	0.17
1 1/4 “	10s	0.22
	40s	0.25
1 1/2 “	10s	0.25
	40s	0.31
2 “	10s	0.43
	40s	0.61
2 1/2 “	10s	0.57
	40s	0.80
3 “	10s	0.73
	40s	1.13
4 “	10s	1.09
	40s	1.87
5 “	10s	1.47
	40s	2.28
6 “	10s	2.15
	40s	3.57
8 “	10s	3.22
	40s	6.07
10 “	10s	5.13
	40s	10.07
12 “	10s	8.16

Pattern Type Of Mss Sp-43 Stub Ends

MSS SP-43 Stub ends are available in two different patterns:

the short pattern, called MSS-A stub ends
the long pattern, called ASA-A stub ends (or ANSI length stub end)