Stainless Steel 347 Pipe Fittings and ASTM A403 WP347 Tee/ Elbow

ASTM A403 WP347 Tee and AISI 347 Buttweld Elbow manufacturer in India

Table Of Content:

Stainless Steel 347 Pipe Fittings Specification
ASTM A403 WP347 Fittings Price List
Types Of Stainless Steel 347 Buttweld Fittings
Types Of Stainless Steel 347 Forged Fittings
SS 347 Elbow Weight Chart
347 Stainless Steel Tee Weight
Stainless Steel 347 Fittings Dimensions
ASTM A403 WP347 Reducer Thickness
Type 347 Stainless Steel Pipe Cap Manufacturing Process
SS 347 Fittings HS Code
347 Stainless Fittings Pressure Rating
Stainless Steel 347 Chemical Composition
347 Stainless Steel Mechanical Properties
ASME SA479 S34700 Stub End Tolerances
AISI 347 Stainless Steel Equivalent
347 Stainless Steel Pipe Fittings Application

SS 347 Pipe Fittings Specific Heat
347 Stainless Steel Elbow Dimensions
Marking On Stainless Steel 347 Pipe Fittings
SCH 40 Stainless Steel 347 Fittings Dimensions
SUS 347 End Caps Dimensions
347 SS Fittings Tensile Properties
ASTM A403 WP347 Buttweld Pipe Fittings Yield Strength
Alloy 347 Concentric Reducer Dimensions
347 Stainless Steel Weld Fittings Production Process
SS 347 Fittings Weight
Inox AISI 347 Stub Ends Dimensions
Testing Requirements Of 1.4550 Stainless Steel Fittings
UNS S34700 Reducing Tee Dimensions

Stainless Steel 347 Pipe Fittings Specification

Specifications	Stainless Steel 347 Pipe Fittings
UNS Number	S34700
Werkstoff No.	1.4550
Density	8.0 g/cm3
Melting Point	1398-1446°C
JIS	SUS 347
Chemical Composition	C (0.08), P (0.045), Mn (2.0), Si (1.0) etc.
Types Of SS 347 Fittings Manufacturer	Elbow (45 Deg, 90 Deg, 180 Deg, Long Radius & Short Radius, 1D, 1.5D, 3D, 5D) Tee ( Reducing, Equal, Unequal, Lateral, Straight, Barred, Split) Reducer (Concentric And Eccentric) End Cap (Square/ Round/ Rectangular/ “U” Shape/ “I” Shape/ Oval End)
Production Technique	Forged/ Heat treated and machined
Surface Treatment	Sand blasting/ Sand Rolling/ Sand Blasting
Coating	Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized
Supporting Material	Gasket/ Ring Joint/ Flange Bolts
Application	Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Manufacturer Size	Buttweld Fittings ½" NB to 120" NB Seamless Fittings ½” to 24” Welded Fittings ½” to 120” Two Joint / Two Halve Fittings 6” to 48”
Thickness Chart	SCH 5S/ SCH 10S/ SCH 40S/ SCH 80S/ SCH 160S/ SCH XXS
Forging Methods	Buttweld Fittings And Welded Fittings Or Seamless Fittings
Our service	Nace Mr 01 75 Sour Service Impact Test As Per Ug 84 Macro Structure Analysis Hydrogen Induce Cracking Test (Hic) Sulphide Stress Cracking Test (Sscc) Cryogenic Services (Cryo),hydrogen Services (H2) Helieum Leak Test Dye Peniterant Test (Dp) Magnetic Partius Test (Mp) Post Weld Heat Treatment (Pwht) Ultrasonic Test (Ut) Hydro Test, Etc.
Bending Radius	R=1D/ 2D/ 3D/ 5D/ 6D/ 8D/ 10D or Custom
Manufacturer Dimension	ANSI/ASME B16.28/ ASME/ANSI B16.9/ MSS-SP-43/ ASME/ANSI B16.11
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc

Highly reliable manufacturer of 347 Stainless Steel Weld Fittings and Alloy 347 Reducer in Mumbai

ASTM A403 WP347 Fittings Price List

Product	SIZE	RATE
Equal Tee	5” X SCH 10	@ RS 500 PER PCS
Equal Tee	6” X SCH 10	@ RS 700 PER PCS
Equal Tee	8” X SCH 10	@ RS 1200 PER PCS
Equal Tee	10” X SCH 10	@ RS 1900 PER PCS
Equal Tee	12” X SCH 10	@ RS 2700 PER PCS
Equal Tee	14” X SCH 10	@ RS 4300 PER PCS
Equal Tee	16” X SCH 10	@ RS 5500 PER PCS

Click here to view complate Stainless Steel Pipe Fittings Price List

Types Of Stainless Steel 347 Buttweld Fittings

ASTM A403 WP347 Fittings

ASTM A403 WP347 Elbow

ASTM A403 WP347 Tee

ASTM A403 WP347 Reducer

ASTM A403 WP347 Pipe Cap

ASTM A403 WP347 End Caps

ASTM A403 WP347 Stub End

ASTM A403 WP347 Buttweld Fittings

SS 347 Buttweld Pipe Fittings

Stainless Steel 347 45 Deg Elbow

SS 347 90 Deg Elbow

UNS S34700 180 Deg Elbow

WNR 1.4550 Short Radius Elbow

ASTM A403 WP347 Long Radius Elbow

AISI 347 Reducing Elbow

SS347 1D Elbow

347 Stainless Steel 1.5D Elbow

347 Stainless 3D Elbow

347 SS 5D Elbow

347 Steel 10D Elbow

AISI 347 SS Welded Elbows

AISI 347 Stainless Steel Short Stub End

347 Stainless Steel Reducing Cross

Type 347 Stainless Steel Reducing Tee

S34700 Equal Tee

1.4550 Stainless Unequal Tee

Aisi 347 Stainless Steel Lateral Tee

EN 1.4550 Concentric Reducer

Steel 347 Eccentric Reducer

A403 WP347 Pipe Bend

347 Stainless Steel Pipe Fittings

SS 347 Pipe Fittings

SS 347 Fittings

347 Stainless Steel Fittings

347 Stainless Steel 90 Degree Elbow

SS 347 Elbow

347 Stainless Steel Elbows

347 SS Fittings

Stainless Steel 347 Buttweld Fittings

347 Stainless Steel Weld Fittings

347 Stainless Steel Reducer

347 Stainless Steel Elbow

Advanced NDT CRT Computed Radiographic Inspection for SS 347 Pipe Cap and A403 Gr WP347 Stub End

Types Of Stainless Steel 347 Forged Fittings

Stainless Steel 347 Forged Elbow

SS 347 90° Forged Elbow

UNS S34700 Threaded Elbows

WNR 1.4550 Forged Cap

ASTM A403 WP347 Coupling

AISI 347 Forged Tee

SS 347 Forged Cross

347 Stainless Steel Union

347 Stainless Forged Plug

347 SS Street Elbow

347 Steel Bushing

347 Stainless Steel Pipe Nipple

Wide Range Of Forging Machineries

Tee Beveling Machine
CNC Lath
Oil Fired Heat Treatment Furnace
Hydraulic Press 300 Tons Capacity
Radial Driling Machine
Elbow Beveling Machine

Conventional Machine
Tee Cold Forming Machines
Elbow Cold Forming Machines
Heat Treatment For Forged Fittings
Hydraulic Press 150 Tons Capacity
Portable Temperature Indicator

Manufacturer of Type 347 Stainless Steel Reducing/ Equal Tee and Inox AISI 347 45/ 90 Degree Elbow as per JIS B2311 and ASME B16.9 standards

SS 347 Elbow Weight Chart

Normal Pipe Size For Stainless Steel 347 Elbow	Weight In LBS	Weight In Kilogram (KG)
1/2	0.09	0.04
3/4	0.09	0.04
1	0.25	0.11
1.1/4	0.38	0.17
1.1/2	0.4	0.18
2	0.81	0.37
2.1/2	1.75	0.79
3	2.63	1.19
3.1/2	3.5	1.59
4	4.5	2.04
5	7.5	3.4
6	12	5.44
8	23	10.43
10	43	19.5
12	62	28.12
14	80	36.29
16	100	45.36
18	126	57.15
20	160	72.57
22	197	89.36
24	238	107.95
26	275	124.74
30	367	166.47
36	531	240.86
NPS	LBS	KG

347 Stainless Steel Tee Weight

NPS Of ASTM A403 WP347 Tee	Weight In LBS	Weight In (KG) Kilogram
1/2	0.35	0.16
3/4	0.45	0.2
1	0.75	0.34
1.1/4	1.3	0.59
1.1/2	2	0.91
2	3.5	1.59
2.1/2	6	2.72
3	7	3.18
3.1/2	9	4.08
4	12	5.44
5	21	9.53
6	34	15.42
8	55	24.95
10	85	38.56
12	120	54.43
14	165	74.84
16	195	88.45
18	249	112.94
20	342	155.13
22	414	187.79
24	528	239.5
26	770	349.27
30	1060	480.81
36	1490	675.85

Stainless Steel 347 Fittings Dimensions

NPS For (Normal Size Of Pipe)	O.D. For (Outside Dai.)		BW 90 Deg Elbow		BW 45 Deg Elbow		BW Return 180 Deg Elbow
*(In Inch)*			BW (Long Radius) Elbow	BW (Short Radius) Elbow	BW (Long Radius) Elbow		BW (Short Radius) Elbow
	*(MM)*	*(inch)*	Center-Face (Inches)	Center-Face (Inches)	Center-Face (In Inches)	Radius (In Inches)	Center-Center (In Inches)	Back-face (In Inches)
1/2	21.3	0.840	1 1/2	–	5/8		2	1 7/8
3/4	26.7	1.050	1 1/8	–	7/16		2 1/4	1 11/16
1	33.4	1.315	1 1/2	1	7/8		3	2 3/16
1 1/4	42.2	1.660	1 7/8	1 1/4	1		3 3/4	2 3/4
1 1/2	48.3	1.900	2 1/4	1 1/2	1 1/8	3	4 1/2	3 1/4
2	60.3	2.375	3	2	1 3/8	4	6	4 3/16
2 1/2	73.0	2.875	3 3/4	2 1/2	1 3/4	5	7 1/2	5 3/16
3	88.9	3.500	4 1/2	3	2	6	9	6 1/4
3 1/2	101.6	4.000	5 1/4	3 1/2	2 1/4	7	10 1/2	7 1/4
4	114.3	4.500	6	4	2 1/2	8	12	8 1/4
5	141.3	5.563	7 1/2	5	3 1/8	10	15	10 5/16
6	168.3	6.625	9	6	3 3/4	12	18	12 5/16
8	219.1	8.625	12	8	5	12	24	16 5/16
10	273.1	10.750	15	10	6 1/4	15	30	20 3/8

NPS For (Normal Size Of Pipe)	O.D. For (Outside Dai.)		BW Pipe End Cap	BW Pipe Straight Tee	BW Pipe Straight Cross	Buttweld Stub Ends
*(Inches)*	*(Millimeter)*	*(In Inches)*	Length (In Inches)	Center-End (In Inches)	Center-End (In Inches)	Lap Dia. (In Inches)	Length (Long) (In Inches)	Length (Short) (In Inches)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5

ASTM A403 WP347 Reducer Thickness

Normal Size Of Steel Pipe	Pipe Sch No.	Weight In Kilogram	(Small) Inner Daimeter	(Small) Thickness	(Large) Outer Daimeter	(Large) Inner Daimeter	(Large) Thickness	(Small) Outer Daimeter	Length Of Con Reducer
12 x 4	40	35.8	4.026	0.237	12.75	11.938	0.406	4.5	8
16 x 6	40	96.5	6.06	0.28	16	15	0.5	6.62	14
18 x 8	40	131	7.976	0.322	18	16.876	0.562	8.62	15
20 x 10	40	205	10.02	0.365	20	18.812	0.594	10.75	20
20 x 8	40	205	7.976	0.322	20	18.812	0.594	8.62	20
24 x 10	40	285	10.02	0.365	24	22.624	0.688	10.75	20
24 x 12	40	285	11.938	0.406	24	22.624	0.688	12.75	20
24 x 14	40	285	13.124	0.438	24	22.624	0.688	14	20
12 x 10	40	35.8	10.02	0.365	12.75	11.938	0.406	10.75	8
12 x 5	40	35.8	5.044	0.258	12.75	11.938	0.406	5.56	8
12 x 6	40	35.8	6.06	0.28	12.75	11.938	0.406	6.62	8
12 x 8	40	35.8	7.976	0.322	12.75	11.938	0.406	8.62	8
14 x 10	40	68.6	10.02	0.365	14	13.124	0.438	10.75	13
14 x 12	40	68.6	11.938	0.406	14	13.124	0.438	12.75	13
14 x 6	40	68.6	6.06	0.28	14	13.124	0.438	6.62	13
14 x 8	40	68.6	7.976	0.322	14	13.124	0.438	8.62	13
16 x 10	40	96.5	10.02	0.365	16	15	0.5	10.75	14
16 x 12	40	96.5	11.938	0.406	16	15	0.5	12.75	14
16 x 14	40	96.5	13.124	0.438	16	15	0.5	14	14
16 x 8	40	96.5	7.976	0.322	16	15	0.5	8.62	14
18 x 10	40	131	10.02	0.365	18	16.876	0.562	10.75	15
18 x 12	40	131	11.938	0.406	18	16.876	0.562	12.75	15
18 x 14	40	131	13.124	0.438	18	16.876	0.562	14	15
18 x 16	40	131	15	0.5	18	16.876	0.562	16	15
20 x 12	40	205	11.938	0.406	20	18.812	0.594	12.75	20
20 x 14	40	205	13.124	0.438	20	18.812	0.594	14	20
20 x 16	40	205	15	0.5	20	18.812	0.594	16	20
20 x 18	40	205	16.876	0.562	20	18.812	0.594	18	20
24 x 16	40	285	15	0.5	24	22.624	0.688	16	20
24 x 18	40	285	16.876	0.562	24	22.624	0.688	18	20
24 x 20	40	285	18.812	0.594	24	22.624	0.688	20	20

Type 347 Stainless Steel Pipe Cap Manufacturing Process

SS 347 Fittings HS Code

Description	Hs Code	Number of Shipments
Stainless Steel 347 Pipe Fittings	7307	-

347 Stainless Fittings Pressure Rating

Buttweld Fittings Temperature Ratings		Types Of Pressure Ratings Class
		Class 150#	Class 300#
			1/4 - 1 (Inch)	1 1/4 - 2 (Inch)	2 1/2 - 3 (Inch)
(^oF)	(^oC)		1/4 - 1 (Inch)	1 1/4 - 2 (Inch)	2 1/2 - 3 (Inch)
-20 to 150	-29 to 66	300	2000	1500	1000
200	93	265	1785	1350	910
250	121	225	1575	1200	825
300	149	185	1360	1050	735
350	177	150	1150	900	650
400	204	-	935	750	560
450	232	-	725	600	475
500	260	-	510	450	385
550	288	-	300	300	300

Stainless Steel 347 Chemical Composition

Grade Name	P	S	Cr	Cb	Ni	Fe	C	Mn	Si
Stainless Steel 347 Pipe Fittings	0.045 (max)	0.030 (max)	17.00 - 20.00	10xC – 1.10	9.00 - 13.00	62.74 min	0.08 (max)	2.0 (max)	1.0 (max)

347 Stainless Steel Mechanical Properties

Yield Strength (0.2%Offset)	Melting Point	Tensile Strength	Elongation	Density
Psi – 30000 , MPa – 205	1454 °C (2550 °F)	Psi – 75000 , MPa – 515	35 %	8.0 g/cm3

ASME SA479 S34700 Stub End Tolerances

NPS	1/2 up to 2.1/2	3 to 3.1/2	4	5 to 8	10 to 18	20 to 24
O.D. at Welding End (Outside Diameter)	+ 1.6 - 0.8	1.6	1.6	+ 2.29 - 1.6	+ 4.06 - 3.05	+ 6.35 - 4.83
Overall Length Of ((F))	1.6	1.6	1.6	1.6	2	2
O.D. of Lap ((G))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6
Wall Thickness of Lap ((T))	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0	+ 1.52 - 0
Lap Fillet Radius of ((R))	+ 0 - 0.76	+ 0 - 0.76	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6	+ 0 - 1.6

AISI 347 Stainless Steel Equivalent

STANDARD	UNS	EN	WERKSTOFF NR.	JIS	GOST
Stainless Steel 347 Pipe Fittings	S34700	X6CrNiNb18-10	1.4550	SUS 347	08Ch18N12B

347 Stainless Steel Pipe Fittings Application

Specialty Chemicals
Power Generation
Condensers
Chemical Equipment
Gas Processing
Pulp and Paper Industry

Sea Water Equipment
Pharmaceutical Equipment
Off-Shore Oil Drilling Companies
Petrochemicals
Heat Exchangers
Pharmaceuticals

SS 347 Pipe Fittings Specific Heat

Specific Heat BTU/lbm -°F
at 32 – 212°F	0.12

ANSI/ASME B16.9 GOST Lr 90deg 1.4550 Stainless Steel Elbow and UNS S34700 Return Bends manufacturer in India

347 Stainless Steel Elbow Dimensions

Normal Size Of Steel Pipe	Outer Daimeter Of (D)	90 deg (LR) Center-End Of (A)	45 deg (LR) Center-End Of (B)	90 deg (3D) Center-End Of (A)	45 deg (3D) Center-End Of (B)
1/2	21.3	38	16	–	–
3/4	26.7	38	19	57	24
1	33.4	38	22	76	31
1¼	42.2	48	25	95	39
1½	48.3	57	29	114	47
2	60.3	76	35	152	63
2½	73	95	44	190	79
3	88.9	114	51	229	95
3½	101.6	133	57	267	111
4	114.3	152	64	305	127
5	141.3	190	79	381	157
6	168.3	229	95	457	189
8	219.1	305	127	610	252
10	273	381	159	762	316
12	323.8	457	190	914	378
14	355.6	533	222	1067	441
16	406.4	610	254	1219	505
18	457	686	286	1372	568
20	508	762	318	1524	632
22	559	838	343	1676	694
24	610	914	381	1829	757
26	660	991	406	1981	821
28	711	1067	438	2134	883
30	762	1143	470	2286	964
32	813	1219	502	2438	1010
34	864	1295	533	2591	1073
36	914	1372	565	2743	1135
38	965	1448	600	2896	1200
40	1016	1524	632	3048	1264
42	1067	1600	660	3200	1326
44	1118	1676	695	3353	1389
46	1168	1753	727	3505	1453
48	1219	1829	759	3658	1516

Marking On Stainless Steel 347 Pipe Fittings

Stainless Steel 316 Pipe Fittings Marking includes ASME/ ANSI B16.9 Codes:

Standard
Products Name
Schedule
Manufacturer Company Name
Code Of ASTM Material
Grade
Size In Inch
Heat Number (HN)

ASME B16.9
180 Deg Elbow
SCH 80
Vishal Steel
Stainless Steel
ASTM A403 WP347
1.5"
17401321

SCH 40 Stainless Steel 347 Fittings Dimensions

Normal Size Of Steel Pipe	Outer Daimeter	Ave. Inner Daimeter	(Min.) Wall Thickness	Fittings Weight In KG	(Max.) Working Pressure
1/4"	.540	.344	.088	.086	780
3/8"	.675	.473	.091	.115	620
1/2"	.840	.602	.109	.170	590
3/4"	1.050	.804	.113	.226	480
1"	1.315	1.029	.133	.333	450
*1-1/4"	1.660	1.360	.140	.450	370
*1-1/2"	1.900	1.590	.145	.537	330
*2"	2.375	2.047	.154	.720	280
2-1/2"	2.875	2.445	.203	1.136	300
*3"	3.500	3.042	.216	1.488	260
3-1/2"	4.000	3.521	.226	1.789	240
*4"	4.500	3.998	.237	2.118	220
5"	5.563	5.016	.258	2.874	190
*6"	6.625	6.031	.280	3.733	180
*8"	8.625	7.942	.322	5.619	160
*10"	10.750	9.976	.365	7.966	140
*12"	12.750	11.889	.406	10.534	130
*14"	14.000	13.073	.437	12.462	130
*16"	16.000	14.940	.500	16.286	130

SUS 347 End Caps Dimensions

Normal Size Of SS 347 End Cap	Outer Diameter (D)	Length Of (Hight)	Length Of (Hight 1)
1/2	21.3	25	25
3/4	26.7	25	25
1	33.4	38	38
1.1/4	42.2	38	38
1.1/2	48.3	38	38
2	60.3	38	44
2.1/2	73	38	51
3	88.9	51	64
3.1/2	101.6	64	76
4	114.3	64	76
5	141.3	76	89
6	168.3	89	102
8	219.1	102	127
10	273	127	152
12	323.8	152	178
14	355.6	165	191
16	406.4	178	203
18	457	203	229
20	508	229	254
22	559	254	254
24	610	267	305
26	660	267	…
28	711	267	…
30	762	267	…
32	813	267	…
34	864	237	…
36	914	267	…
38	965	305	…
40	1016	305	…
42	1067	305	…
44	1118	343	…
46	1168	343	…
48	1219	343	…

347 SS Fittings Tensile Properties

Tensile Strength	Psi – 75000	MPa – 515

ASTM A403 WP347 Buttweld Pipe Fittings Yield Strength

Yield Strength (0.2%Offset)	Psi – 30000	MPa – 205

Alloy 347 Concentric Reducer Dimensions

Code Of RCD Reiso	(BIG) Ø			(SMALL) Ø			Hight (H) In Millmeter	Weight Of Theoretical In Kilogram
Code Of RCD Reiso	(DN)	D In Millmeter	(S) Thickness In MM	(DN)	D Millmeter	(S) Thickness In MM	Hight (H) In Millmeter	Weight Of Theoretical In Kilogram
27 21	3/4	26.9	2.3	1/2	21.3	2.0	38	0.08
33 21	1	33.7	2.6	1/2	21.3	2.0	50	0.09
33 27	1	33.7	2.6	3/4	26.9	2.3	50	0.09
42 21	1"1/4	42.4	2.6	1/2	21.3	2.0	50	0.12
42 27				3/4	26.9	2.3		0.13
42 33				1	33.7	2.6		0.14
*48 21	1"1/2	48.3	2.6	1/2	21.3	2.0	64	0.18
48 27				3/4	26.9	2.3		0.19
48 33				1	33.7	2.6		0.20
48 42				1"1/4	42.4	2.6		0.20
60 27	2	60.3	2.9	3/4	26.9	2.3	76	0.30
60 33				1	33.7	2.6		0.31
60 42				1"1/4	42.4	2.6		0.32
60 48				1"1/2	48.3	2.6		0.33
76 33	2"1/2	76.1	2.9	1	33.7	2.6	90	0.40
76 42				1"1/4	42.4	2.6		0.47
76 48				1"1/2	48.3	2.6		0.48
76 60				2	60.3	2.6		0.49
89 42	3	88.9	3.2	1"1/4	42.4	2.6	90	0.55
89 48				1"1/2	48.3	2.6		0.61
89 60				2	60.3	2.9		0.62
89 76				2"1/2	76.1	2.9		0.63
114 48	4	114.3	3.6	1"1/2	48.3	2.6	100	0.85
114 60				2	60.3	2.9		0.98
114 76				2"1/2	76.1	2.9		1.00
114 89				3	88.9	3.2		1.02
139 60	5	139.7	4.0	2	60.3	2.9	127	1.60
139 76				2"1/2	76.1	2.9		1.70
139 89				3	88.9	3.2		1.74
139 114				4	114.3	3.6		1.76
*168 76	6	168.3	4.5	2"1/2	76.1	2.9	140	2.60
168 89				3	88.9	3.2		2.70
168 114				4	114.3	3.6		2.82
168 139				5	139.7	4.0		2.94
219 114	8	219.1	6.3	4	114.3	3.6	152	5.03
219 139				5	139.7	4.0		5.12
219 168				6	168.3	4.5		5.18
*273 114	10	273.0	6.3	4	114.3	3.6	178	7.00
*273 139				5	139.7	4.0		7.20
273 168				6	168.3	4.5		7.40
273 219				8	219.1	6.3		7.55
323 168	12	323.9	7.1	6	168.3	4.5	203	11.00
323 219				8	219.1	6.3		11.10
323 273				10	273	6.3		11.20

347 Stainless Steel Weld Fittings Production Process

SS 347 Fittings Weight

NPS (Normal Size Of Steel Pipe)	10S Sche			40S Sche			80S Sche
NPS (Normal Size Of Steel Pipe)	ASME B16.9 Butt weld 90 Deg Elbow	ASME B16.9 Butt weld 45 Deg Elbow	ASME B16.9 Butt weld Equal Tee	ASME B16.9 Butt weld 90 Deg Elbows	ASME B16.9 Butt weld 45 Deg Elbows	ASME B16.9 Butt weld Equal Tee	ASME B16.9 Butt weld 90 Deg Elbow	ASME B16.9 Butt weld 45 Deg Elbow	ASME B16.9 Butt weld Equal Tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

NPS For (Normal Size Of Steel Pipe)	10S Sch			40S Sch			80S Sch
NPS For (Normal Size Of Steel Pipe)	ANSI B16.9 Butt weld Con Reducer	ANSI B16.9 Butt weld Ecc Reducer	ANSI B16.9 Butt weld Reducing Or Unequal Tee	ANSI B16.9 Butt weld Con Reducer	ANSI B16.9 Butt weld Ecc Reducer	ANSI B16.9 Butt weld Reducing Or Unequal Tee	ANSI B16.9 Butt weld Con Reducer	ANSI B16.9 Butt weld Ecc Reducer	ANSI B16.9 Butt weld Reducing Or Unequal Tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Inox AISI 347 Stub Ends Dimensions

NPS	Outer diameter of barrel		Length Of F		Radius Of R	Diameter Of G
NPS	(Min.)	(Max.)	Long And Pattern	Short And Pattern	Radius Of R	Diameter Of G
1/2"	20.5	22.8	76	51	3	35
3/4"	25.9	28.1	76	51	3	43
1"	32.6	35.0	102	51	3	51
1 1/4"	41.4	43.6	102	51	5	64
1 1/2"	47.5	49.9	102	51	6	74
2"	59.5	62.4	152	64	8	92
2 1/2"	72.2	75.3	152	64	8	105
3"	88.1	91.3	152	64	10	127
3 1/2"	100.8	104.0	152	76	10	140
4"	113.5	116.7	152	76	11	157
5"	140.5	144.3	203	76	11	186
6"	167.5	171.3	203	89	13	216
8"	218.3	222.1	203	102	13	270
10"	272.3	277.2	254	127	13	324
12"	323.1	328.0	254	152	13	381
14"	354.8	359.9	305	152	13	413
16"	405.6	411.0	305	152	13	470
18"	456.0	462.0	305	152	13	533
20"	507.0	514.0	305	152	13	584
22"	558.0	565.0	305	152	13	641
24"	609.0	616.0	305	152	13	692

Testing Requirements Of 1.4550 Stainless Steel Fittings

Class	Ultrasonic Examination	Liquid Penetrant Examination	Intergranular Corrosion Test	Product Analysis
Class-1	100% on finished product over entire volume, (100% on the pipe/fogings used for making fittings) *	100 % external and all accessible internal surfaces	On one sample per lot +	On one sample from each size of each heat treatment batch
Class-2	Not required	100 % on all external and accessible internal surfaces	On one sample per lot +	On one sample from each size of each heat treatment batch.
Class-3	Not required	Not required	On one sample per lot +	On one sample from each size of each heat treatment batch.

UNS S34700 Reducing Tee Dimensions

NPS Of SS 347 Reducing Tee		O.D. (Outer Daimeter) at bevel		Center-End
Run	Outlet	Run	Outlet	Run (C)	Outlet (M)
1/2"	1/4" 3/8"	21.3	13.7 17.3	25	25
3/4"	3/8" 1/2"	26.7	17.3 21.3	29	29
1"	1/2" 3/4"	33.4	21.3 26.7	38	38
1 1/4"	1/2" 3/4" 1"	42.2	21.3 26.7 33.4	48	48
1 1/2"	1/2" 3/4" 1" 1 1/4"	48.3	21.3 26.7 33.4 42.2	57	57
2"	3/4" 1" 1 1/4" 1 1/2"	60.3	26.7 33.4 42.2 48.3	64	44 51 57 60
2 1/2"	1" 1 1/4" 1 1/2" 2"	73.0	33.4 42.2 48.3 60.3	76	57 64 67 70
3"	1 1/4" 1 1/2" 2" 2 1/2"	88.9	42.2 48.3 60.3 73.0	86	70 73 76 83
3 1/2"	1 1/2" 2" 2 1/2" 3"	101.6	48.3 60.3 73.0 88.9	95	79 83 89 92
4"	1 1/2" 2" 2 1/2" 3" 3 1/2"	114.3	48.3 60.3 73.0 88.9 101.6	105	86 89 95 98 102
5"	2" 2 1/2" 3" 3 1/2" 4"	141.3	60.3 73.0 88.9 101.6 114.3	124	105 108 111 114 117
6"	2 1/2" 3" 3 1/2" 4" 5	168.3	73.0 88.9 101.6 114.3 141.3	143	121 124 127 130 137
8"	3 1/2" 4" 5" 6"	219.1	101.6 114.3 141.3 168.3	178	152 156 162 168
10"	4" 5" 6" 8"	273.0	114.3 141.3 168.3 219.1	216	184 191 194 203
12"	5" 6" 8" 10"	323.8	141.3 168.3 219.1 273.0	254	216 219 229 241
14"	6" 8" 10" 12"	355.6	168.3 219.1 273.0 323.8	279	238 248 257 270
16"	6" 8" 10" 12" 14"	406.4	168.3 219.1 273.0 323.8 355.6	305	264 273 283 295 305
18"	8" 10" 12" 14" 16"	457.0	219.1 273.0 323.8 355.6 406.4	343	298 308 321 330 330
20"	8" 10" 12" 14" 16" 18"	508.0	219.1 273.0 323.8 355.6 406.4 457.0	381	324 333 346 356 356 368
22"	10" 12" 14" 16" 18" 20"	559.0	273.0 323.8 355.6 406.4 457.0 508.0	419	359 371 381 381 394 406
24"	10" 12" 14" 16" 18" 20" 22"	610.0	273.0 323.8 355.6 406.4 457.0 508.0 559.0	432	384 397 406 406 419 432 432

Contact Person

Factory Address: