Factory Address:
Plot No. 749/77/5, G.I.D.C. Estate, Makarpura, Vadodara -390010.
Bend Weight & Length
The Bend Weight & Length calculator allows you to determine the approximate weight of your bend based on specific product dimensions.
| Nominal Pipe Size (A) (SEE MATERIAL CHART) |
|
| Outside Diameter (Inches) (B) | |
| Wall Thickness (Inches) (C) | |
| Center Line Radius (Inches)(D) | |
| Bend Angle (DEGREES) (E) | |
| Lead Tangent Length (Inches) (F) | |
| Lag Tangent Length (Inches) (G) |
| Volume of Steel (Cubic Inches) | |
| Weight of Bend (lbs) | |
| Bend Material Length (inches) |
Standard Material Chart
The Standard Material Chart provides the list of the most readily available material offerings stocked by Vishal Steel.
| NPS (A) | O.D Outer Diameter |
Wall Thickness | Weight/Ft |
|---|---|---|---|
| 2.5 NPS | 2.875 | 0.276 | 7.66 |
| 3 NPS | 3.5 | 0.300 | 10.25 |
| 4 NPS | 4.5 | 0.230 | 11.35 |
| 4 NPS | 4.5 | 0.337 | 14.98 |
| 5 NPS | 5.563 | 0.258 | 14.62 |
| 5 NPS | 5.563 | 0.375 | 20.78 |
| 6 NPS | 6.625 | 0.280 | 18.97 |
| 6 NPS | 6.625 | 0.432 | 28.57 |
| 8 NPS | 8.625 | 0.322 | 28.55 |
| 8 NPS | 8.625 | 0.500 | 43.39 |
| 10 NPS | 10.75 | 0.365 | 40.48 |
| 10 NPS | 10.75 | 0.500 | 54.74 |
| 12 NPS | 12.75 | 0.375 | 49.56 |
| 12 NPS | 12.75 | 0.500 | 65.42 |
| 14 NPS | 14 | 0.375 | 54.57 |
| 14 NPS | 14 | 0.500 | 72.09 |
| 16 NPS | 16 | 0.375 | 62.58 |
| 16 NPS | 16 | 0.500 | 82.77 |
| 18 NPS | 18 | 0.500 | 95.64 |
| 20 NPS | 20 | 0.500 | 106.57 |
Pipe Elbow Weight Calculator
Weight of 90D Elbow Long Radius (LR) (ASME/ANSI B16.9) equals to:
0.0387 x S x (D-S) x R / 1000
The weight of 45 Degree Elbow Long Radius is half of 90 Deg while the weight of 180D is twice of 90D.
The weight of 90 Degree Elbow Short Radius is two thirds of 90 Deg Long Radius Elbow.
Pipe Tee Weight Calculator
The weight of ASME B16.9 Equal Tee (ANSI/ASME B16.9) equals to:
0.02466 x (S+1.5) x (D-S-1.5) x (3C-D/2) / 1000
The weight of primary class reducing tee is 94% of its equal type.
The weight of second class reducing tee is 91% of its equal type.
The weight of third class reducing tee is 89% of its equal type.
The weight of fourth class reducing tee is 86% of its equal type.
Pipe Reducer Weight Calculator
The weight of primary class pipe reducer (concentric and eccentric) equals to:
0.02466 x S x (D-S) x H / 1000
The weight of second class reducer is 94% of its primary class.
The weight of third class reducer is 91% of its primary class.
The weight of fourth class reducer is 89% of its primary class.
