+91-22-67521137 / +91 9867065706
Vishal Steel India

Factory Address:

Plot No. 749/77/5, G.I.D.C. Estate, Makarpura, Vadodara -390010.

Super Duplex Flanges

Super Duplex Flanges Specification

How do I ensure the quality of the super duplex flanges I purchase?

  • Verify the 2507 flanges have relevant certifications.
  • Source flanges from reputed super duplex flanges manufacturer in India like Vishal Steel that are known for their quality products.
  • Request material test reports to confirm the chemical composition and mechanical properties of the material.
  • Ensure the alloy 2507 spectacle blinds comply with industry standards, pressure temperature ratings and other specifications.
  • Inspect the flange or conduct third party testing to verify their quality and performance.

What are the 5 common complaints of the buyers about super duplex 2507 flanges?

  • Super duplex 2507 flanges not meeting specified dimensions or tolerances.
  • Concerns about surface imperfections that may affect their performance.
  • SCH 40 S32750 Flange experiencing unexpected corrosion or pitting.
  • Buyers may raise issues about the authenticity of the super duplex forged flanges material.
  • Gasket seating or leakage problems can indicate issues with the super duplex 2507 orifice flanges face or sealing surfaces.

To ensure there are no such complaints, work with a reliable A182 Gr F55 plate flange manufacturer in India like Vishal Steel.


Super Duplex Flanges

Can custom thicknesses be ordered for ASTM A182 F53 blind flange?

You can order ASTM A182 F53 blind flange in custom thickness by contacting a top-rated and reputed manufacturer, Vishal Steel.


How do you choose the right bolt sizes for a SA 182 F55 slip on flange?

  • Identify the size of the SA 182 F55 slip on flange.
  • Determine the pressure rating of the flange to ensure the selected bolts can handle the maximum operating pressure.
  • Consider the gasket type and material used in the flange joint.
  • Refer to industry standards to find the recommended bolt sizes and dimensions.
  • Consider the flange face type.
  • Choose appropriate nuts that match the selected bolts.

Super Duplex Blind Flanges

Super Duplex Blind Flanges

Super Duplex Slip On Flanges

Super Duplex Slip On Flanges

Super Duplex Weld Neck Flanges

Super Duplex Weld Neck Flanges

Super Duplex Flanges

Table Of Content:



Refer ASTM A182 F53 Blind Flange Specification As Per ASME B16.5


Super Duplex Flanges Specification

Manufacturing Size Range

Manufacturing Size Range :

  • NPS: ½” to 48″
  • PN 2.5 – PN 400
  • 15NB – 1500NB
Melting Point

Melting Point :

  • 2460°F
  • 1350°C
Features

Features :

  • Good weldability
  • High Strength
  • Corrosion resistant
Wall Thickness

Wall Thickness :

  • SCH 10/ 20/ 40
  • SCH 60/ 80/ 100
  • SCH 120/ 140
  • SCH 160/ 180
Pressure

Pressure :

  • Class 125, 150
  • Class 300, 400
  • Class 600, 900
  • Class 1500, 2500
Standard & Size

Standard & Size :

  • ASME B16.48 : 2″ To 24″
  • ASME B16.5 : 1/2″ To 24″
  • ASME B16.47 : 24″ To 60″
  • ASME B16.36 : 2″ To 24″
Forging Process

Forging Process :

  • Machining
  • Packaging
  • Forming
  • Inspection test
Threads

Threads :

  • BSPP (Male & female)
  • MNPT (Male)
  • MPT/ BSPT (Female)
  • NPT/ BSP/ FPT
Surface Finish

Surface Finish :

  • Smooth finish
  • Concentric serrated
  • Cold water finish
  • Spiral serrated
UNS & WNR Number

UNS & WNR Number :

  • ASTM A182 F53 = UNS S32750 / WNR 1.4410
  • ASTM A182 F55 = UNS S32760/ WNR 1.4410
Curie Temperature

Curie Temperature :

  • above 570°F
No. Of Bolts Hole

No. Of Bolts Hole :

  • 4 To 48
Types Of Connection

Types Of Connection :

  • Threaded
  • Welding
Forging Temperature

Forging Temperature :

  • Above +300°C
  • Below -50°C
Density

Density:

  • Density (g/cm 3) = 7.8
  • Density (lb/in 3) = 0.281
Faces Method

Faces Method :

  • M&F face (Male & female)
  • RF face (Raised)
  • RTJ face (Ring type joint)
  • FF face (Plain or flat)
  • T&G face (Tongue & groove)
Corrosion Resistance

Corrosion Resistance :

  • Electric bevelling machine
  • Bending machine
  • Pushing Machine
  • Press machine
Applications

Applications:

  • Power generation plant
  • Oil & gas plants
  • Nuclear energy sector
Logistics Way

Logistics Way :

  • By Train
  • By Sea
  • By Air
Types Of Packaging

Types Of Packaging :

  • Carton box
  • Plastic bag
  • Wooden case
  • Or custom as required
Working Temperature

Working Temperature :

  • 1875°F and 2250°F


For More Information Please Contact US

PED Approved SA 182 F55 Slip On Flange Manufacturer in India As Per EN 1092-2, Check Price List


Super Duplex Blind Flanges Price


Size In Millimetre Class Weight In LBS Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
1/2 150 1 US$ 18.90 69.42
3/4 150 2 US$ 20.40 74.93
1 150 2 US$ 23.15 85.03
1-1/4 150 3 US$ 29.90 109.82
1-1/2 150 4 US$ 30.99 113.83
2 150 5 US$ 35.50 130.39
2-1/2 150 7 US$ 52.90 194.30
3 150 9 US$ 56.99 209.32
4 150 17 US$ 77.80 285.76
5 150 20 US$ 90.35 331.86
6 150 26 US$ 119.92 440.47
8 150 45 US$ 199.25 731.85
10 150 70 US$ 445.29 1635.55
12 150 110 US$ 477.44 1753.64

Alloy 2507 Weld Neck Flange Price


Size In Millimetre Class Weight In LBS Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
1/2 150 2 US$ 19.70 72.36
3/4 150 2 US$ 25.45 93.48
1 150 3 US$ 28.72 105.49
1-1/4 150 3 US$ 36.15 132.78
1-1/2 150 4 US$ 39.85 146.37
2 150 6 US$ 41.77 153.42
2-1/2 150 8 US$ 48.84 179.39
3 150 10 US$ 59.49 218.51
4 150 15 US$ 83.44 306.48
5 150 19 US$ 118.26 434.37
6 150 24 US$ 137.78 506.07
8 150 39 US$ 229.52 843.03
10 150 52 US$ 308.69 1133.82
12 150 85 US$ 458.48 1684.00

ASTM A182 F55 Weld Neck Flange Supplier with UT, MT or PT Non-Destructive Testing in Mumbai, View Werkstoff 1.4410 Socket Weld Flange Tensile Strength & Heat Treatment


WNR 1.4410 F53 weld flanges Tensile strength

Grade A182 F55 A182 F53
Tensile strength, min. In KSI 109 116

F53 Flange Temperature

100°F 200°F 300°F
116.0 115.5 109.1
400°F 500°F 600°F
105.4 103.6 103.0

Temperature Range Of Alloy 2507 Slip On Flange

  • Above +300°C
  • Below -50°C

Heat Treatment Of ASTM A790 UNS S32750 Pipe Flange

  • Heat treatment = solution treat and quench (S+Q)
  • Quenching cool below = 260°C [500°F]
  • Cooling media = liquid

A182 F53 flange Melting temperature

  • Melting Point in °C = 1350
  • Melting Point in °F= 2460

A182 F55 SDSS Flange Chromium Content

  • Minimum= 24%
  • Maximum= 26%

Density Of A182 F55 Flange

  • 7.8 kg/dm³

What is the difference between SCH 40 and SCH 80 in super duplex stainless steel flanges?

The difference between sch 40 & 80 super duplex stainless steel flanges is in their wall thickness. The higher the schedule, the greater the wall thickness. This means sch 80 flange will be able to handle higher pressure ratings than the sch 40 ones.


Check Super Duplex Stainless Steel Flanges Pressure Class or as Required In UNS S32750/ S32760 Material, and Corrosion Properties Of ASTM A182 GR F53 Lap Joint Flange

Super Duplex Flange Pressure Rating in Class 150


Temp.
°F		 150
-20~100 290
200 260
300 230
400 200
500 170
600 140
650 125
700 110
750 95

300# Super Duplex Stainless Steel Flanges Pressure Rating


Temp.
°F		 300
-20~100 750
200 745
300 665
400 615
500 580
600 555
650 545
700 540
750 530

CL 600 Super Duplex Steel Flanges Pressure Rating


Temp.
°F		 600
-20~100 1500
200 1490
300 1335
400 1230
500 1160
600 1115
650 1095
700 1085
750 1065

Class 900 Super Duplex Flange Pressure Rating


Temp.
°F		 900
-20~100 2250
200 2230
300 2000
400 1845
500 1740
600 1670
650 1640
700 1625
750 1595

Class 1500 Super Duplex Pipe Pressure Rating


Temp.
°F		 1500
-20~100 3750
200 3720
300 3335
400 3070
500 2905
600 2785
650 2735
700 2710
750 2660

2500# Super Duplex SS Flanges Pressure Rating


Temp.
°F		 2500
-20~100 6250
200 6200
300 5560
400 5120
500 4840
600 4640
650 4560
700 4520
750 4430

SAF 2507 Super Duplex Flange Equivalent


Standard ASTM A182 F55 ASTM A182 F53
UNS UNS S32760 UNS S32750
WERKSTOFF NR. 1.4410 1.4410
UNS S32760 S32750

ASTM A182 F53 Flanges Chemical Composition


Carbon

0.030 (max.)

Chromium

24.00 – 26.00

Phosphorus

0.035 max

Sulphur

0.020 maximum

Nickel

6.00 – 8.00

Nitrogen

0.24 – 0.32

Molybdenum

3.00 – 5.00

Silicon

0.80 max

Iron

58.095 minimum

Manganese

1.20 maximum

ASTM A182 UNS S32750 Flanges Mechanical Properties


Grade A182 F55 A182 F53
Density 0.281lb/in 3 7.8g/cm 3
Melting Point 2460°F 1350°C
Elongation in 2 in., or 50mm, minimum, % 25 15
Yield strength, minimum, MPa [KSI] 550 [80] 550 [80]

Super Duplex Flanges Grade


UNS S32750 Flange

UNS S32750 Flange


UNS S32760 Flange

UNS S32760 Flange



ASTM A182 F55 Flanges Chemical Composition


Carbon

0.05 maximum

Chromium

24.00 – 26.00

Phosphorus

0.030 maximum

Sulphur

0.010 maximum

Nickel

6.00 – 8.00

Nitrogen

0.20 – 0.30

Molybdenum

3.00 – 4.00

Silicon

1.00 maximum

Iron

57.61 minimum

Manganese

1.00 maximum

2507 Flange Hardness


Grade A182 F55 A182 F53
Hardness, (Maximum) Brinell 300 310

Corrosion Properties Of UNS S32750 Forging Flanges

Environment Super Duplex 2507 Flanges Test Duration
10% Formic- boiling 0.07 mpy 3-48 HR
50% Acetic – boiling 0.0 mpy 3-48 HR
10% H2S04 – 80°C 0.15 mpy 3-48 HR
Manufacturer of Super Duplex Threaded Flange in FF/ RF/ RTJ Faces, Dimensions Of A182 F53 Forged Flange (BS4504 PN16), Refer Weight Chart & Wall Thickness in BS10 Table D

Super Duplex Blind Flanges Dimensions

Super Duplex Blind Flanges Dimensions
(Normal Size Of Steel Pipe) In Inch Weight In Kilogram (KG) Daimeter Of BLRF Bolt Holes
 Outer Daimeter Of
(A)		 WT Of (B)
 RF Daimeter Of
(C)		 (D)
(B.C.D.)		 # BLRF Flanges Bolts
Holes
1/2 2 5/8 3-1/2 7/16 1-3/8 2-3/8 4
1 2 5/8 4-1/4 9/16 2 3-1/8 4
1-1/2 3 5/8 5 11/16 2-7/8 3-7/8 4
2 4 3/4 6 3/4 3-5/8 4-3/4 4
2-1/2 7 3/4 7 7/8 4-1/8 5-1/2 4
3 9 3/4 7-1/2 15/16 5 6 4
3-1/2 13 3/4 8-1/2 15/16 5-1/2 7 8
4 17 3/4 9 15/16 6-3/16 7-1/2 8
5 20 7/8 10 15/16 7-5/16 8-1/2 8
6 27 7/8 11 1 8-1/2 9-1/2 8
8 47 7/8 13-1/2 1-1/8 10-5/8 11-3/4 8
10 67 1 16 1-3/16 12-3/4 14-1/4 12
12 123 1 19 1-1/4 15 17 12
14 139 1-1/8 21 1-3/8 16-1/4 18-3/4 12
18 217 1-1/4 25 1-9/16 21 22-3/4 16
24 415 1-3/8 32 1-7/8 27-1/4 29-1/2 20

Super Duplex 2507 Weld Neck Flanges Weight

NPS
(Inches)		 WN
1/2 3.1
3/4 3.7
1 5.2
1 1/4 7.7
1 1/2 10.9
2 16.2
2 1/2 23.7
3 36.2
4 55.3
5 92.5
6 143.0
8 215.0
10 406.0
12 572.0

A182 F53 Blind Flange Flanges Weight

NPS
(Inches)		 BLIND
1/2 3.0
3/4 3.5
1 5.0
1 1/4 7.4
1 1/2 10.4
2 15.6
2 1/2 22.6
3 34.8
4 53.9
5 90.8
6 141
8 214
10 411.0
12 592.0

UNS S32750 Flange Ratings


Class15030040060090015002500
(PN)205068100150250420

ASTM A182 F53 Flange Face Types


Face Types Marking symbol Diagram
Male Female Face M&F Male Female Face
Tongue Groove Face T & G Tongue Groove Face
Lap Joint Face LJRF Lap Joint Face
Ring Type Joint RTJ Ring Type Joint
Flat Face FF Flat Face
Raised Face RF Raised Face

ASTM A790 UNS S32750 Flange Wall Thickness


Normal Size Of Pipe 20 Schedule 40 Schedule
½ ... 0.109
¾ ... 0.113
1 ... 0.133
1 ¼ ... 0.14
1 ½ ... 0.145
2 ... 0.154
2 ½ ... 0.203
3 - 0.216
3 ½ - 0.226
4 - 0.237
5 - 0.258
6 - 0.28
8 0.25 0.322
10 0.25 0.365
12 0.25 0.406
14 0.312 0.438
16 0.312 0.5
18 0.312 0.562
20 0.375 0.594
24 0.375 0.688

2507 Super Duplex Flanges Standard


2507 Super Duplex Flanges Standard
  • BS 4504
  • ASME B16.5
  • DIN
  • EN 1092-1
  • AWWA C207
  • ANSI B16.5
  • MSS SP-44
  • EN 1092-2 PN16
  • JIS
  • ISO

What are the differences between an RF and RTJ face type in a flange super duplex?

  • The raised Face flange super duplex is where the gasket seating surface is slightly raised above the main surface. The Ring Type Joint has a groove or ring machined into the flange face, where a metallic gasket is placed.
  • RF flanges typically use soft gaskets whereas RTJ flanges use metal ring gaskets.
  • RF face flanges are commonly used in low to medium pressure applications. RTJ face flanges are preferred for high pressure and temperature applications

How do you choose the right pressure class for a Werkstoff 1.4410 socket weld flange?

  • Determine the maximum operating pressure of the piping system.
  • Consider the temperature at which the Werkstoff 1.4410 socket weld flange will operate.
  • Refer to ASME B16.5 standards for pressure-temperature ratings.
  • Select a pressure class that has a rating above the maximum operating pressure.
  • Evaluate the specific application and the criticality of the process to choose an appropriate pressure class.

Top 3 advantages of super duplex steel flanges

  • Super duplex steel flanges offer excellent corrosion resistance and can be used in offshore oil & gas platforms, chemical processing plants and seawater applications.
  • The flanges exhibit high mechanical strength and toughness.
  • ASTM A182 Gr F53 lap joint flange offers superior performance and longer service life which makes it cost effective.

What are the export requirements for ASTM A182 F55 weld neck flange in UAE?

  • Ensure the ASTM A182 F55 weld neck flange meets the relevant UAE standards and specifications.
  • Comply with UAE customs regulations and provide accurate documents.
  • Properly package the weld neck ASTM A182 F55 flange in accordance with UAE shipping regulations.

Super Duplex 2507 Flanges Manufacturing Facilities

  • Bolt Hole drilling: High speed CNC Vertical Machining Center
  • Open / Close Die Forging & Rolling: Hammer /Press / Ring Rolling
  • Raw material cutting: band saw
  • Machining: SPM lathes/ CNC lathes

Testing Of Super Duplex SS Flanges


Testing Of Super Duplex SS Flanges
  • Ultrasonic testing machine
  • Tensile testing machine
  • Radiation servo meter
  • Mobile spectrometer for PMI test

Expert Engineer Working Our Factory

Expert Engineer Working Our Factory
Expert Engineer Working Our Factory
Expert Engineer Working Our Factory

Factory Tour

Factory Tour
Factory Tour
Factory Tour

Super Duplex Flanges Forging Machine

Super Duplex Flanges Forging Machine
Super Duplex Flanges Forging Machine
Super Duplex Flanges Forging Machine
  • Radial Driling Machine
  • Tee Cold Forming Machines
  • Heat Treatment For Forged Fittings
  • Portable Temperature Indicator
  • Elbow Cold Forming Machines
  • Oil Fired Heat Treatment Furnace
  • Conventional Machine
  • Hydraulic Press 150 Tons Capacity
  • Hydraulic Press 300 Tons Capacity
  • Tee Beveling Machine
  • CNC Lath
  • Elbow Beveling Machine

Types Of Super Duplex Flanges


Super Duplex Steel Spectacle Blind Flange

Super Duplex Steel Spectacle Blind Flange

  • Sizes :
  • 1/2" to 24" Inch
  • 12.7 to 609.6 MM
  • DN15 To DN1200
Super Duplex 2507 Orifice Flange

Super Duplex 2507 Orifice Flange

  • Production Process :
  • Casting
  • Forging
  • Rolling/ cutting
UNS S32750 Puddle Flange

UNS S32750 Puddle Flanges

  • Manufacturing Process :
  • Castings
  • Forgings
  • Plates
UNS S32760 Socket Weld Flange

UNS S32760 Socket Weld Flanges

  • Face Type :
  • Ring type joint
  • Flat face
  • Raised face
ASTM A182 F53 Plate Flange

ASTM A182 F53 Plate Flanges

  • Dimensions
  • ASME B16.5
  • ASME B16.47
  • ANSI B16.5
ASTM A182 F55 Lap Joint Flange

ASTM A182 F55 Lap Joint Flanges

  • EN Standard :
  • 6Bar/ 10Bar
  • 16Bar/ 25Bar
  • 40Bar
Werkstoff 1.4410 Threaded Flange

Werkstoff 1.4410 Threaded Flanges

  • Supporting Material :
  • Gasket
  • Ring joint
  • Flange bolts
Alloy 2507 Raised Face Flanges

Alloy 2507 Raised Face Flanges

  • Production Technique :
  • Forged
  • Heat treated
  • Machined
A182 F53 Super Duplex RTJ Flanges

A182 F53 Super Duplex RTJ Flanges

  • DIN Standard :
  • PN6/ PN10
  • PN16/ PN25
  • PN40/ PN64
ASTM A790 UNS S32750 Lap Joint Flange

ASTM A790 UNS S32750 Lap Joint Flanges

  • Suitable Gasket :
  • SOFT gaskets
  • Hard gaskets
  • Composite gaskets
Super Duplex Stainless Steel Flanges

Super Duplex Stainless Steel Flanges

  • Flange Bolts :
  • High strength bolts
  • Medium strength bolts
  • Low strength bolts
Super Duplex Steel Flanges

Super Duplex Steel Flanges

  • Facing Finish :
  • Stock finish
  • Spiral serrated
  • Smooth finish
Super Duplex 2507 Flange

Super Duplex 2507 Flange

  • JIS Standard :
  • 5K/ 10K/ 16K
  • 20K/ 30K
  • 40K/ 63K
UNS S32750 Flange

UNS S32750 Flanges

  • Testing methods :
  • Proof test
  • Tensile test
  • Impact test
UNS S32760 Flange

UNS S32760 Flanges

  • Wall Thickness :
  • Schedule 10/ SCH 20
  • Schedule 40/ SCH 80
  • Schedule 120/ SCH 180
ASTM A182 F53 Flange

ASTM A182 F53 Flanges

  • Surface Finish :
  • Mill Finishes
  • Bright annealed
  • Mechanically polished
ASTM A182 F55 Flange

ASTM A182 F55 Flanges

  • International Standard :
  • JIS/ AWWA
  • DIN/ API
  • EN/ BS

Vishal Steel India
Types Of Piping Materials

Vishal Steel India

 

whatsapp chat

Call

x