+91-22-67521137 / +91 9867065706
Vishal Steel India

Factory Address:

Plot No. 749/77/5, G.I.D.C. Estate, Makarpura, Vadodara -390010.

Super Duplex Pipe Fittings manufacturer in India

Super Duplex Pipe Fittings

What are the key specifications and requirements of super duplex pipe fittings for buyers?

  • Super duplex pipe fittings should be made from a specified grade of material to ensure superior corrosion resistance and strength.
  • Super Duplex Pipe Fittings manufacturer in India ensures that the fittings meet relevant standards to ensure quality and performance.
  • Select SDSS pipe fittings with appropriate pressure ratings suitable for a given application.
  • The size and dimensions should match the pipe system requirements.
  • Material test reports and relevant certifications are crucial to indicate compliance with industry standards.

How do you ensure the quality of super duplex fittings for manufacturers?

  • Verify the grade and composition of the SDSS fittings to ensure they meet the required specifications.
  • Conduct thorough inspections and testing during and after manufacturing to detect defects.
  • Ensure the fittings adhere to relevant industry standards.
  • Maintain comprehensive documentation of material certifications and test results for traceability.

Super Duplex Pipe Fittings

What are the different testing requirements for supplying super duplex 2507 pipe fittings?

  • Chemical composition analysis verifies the chemical composition of the super duplex 2507 material to meet the specified requirements.
  • The mechanical properties test is to measure tensile & yield strengths and elongation to ensure the mechanical performance of the super duplex 2507 pipe fittings.
  • Corrosion resistance testing evaluates the corrosion resistance properties in harsh environments.
  • Nondestructive testing like ultrasonic or dye penetrant testing helps to detect any surface or internal defects.

Can you explain the difference between super duplex elbow prices in India and UK?

The price of the super duplex elbow in India is lower than that in the UK. This is because India has:

  • Acess to high quality raw materials at lower prices.
  • Well equipped manufacturing unit that can produce in ASTM A815 UNS S32750 elbow bulk.
  • Availability of cheaper labor force.

Super Duplex Fittings

Super Duplex Fittings

Super Duplex Stainless Steel Pipe Fittings

Super Duplex Stainless Steel Pipe Fittings

Super Duplex 2507 Pipe Fittings

Super Duplex 2507 Pipe Fittings

Super Duplex Pipe Fittings

Table Of Content:


Manufacturer Of ASTM A815 UNS S32750 Elbow in India, View Specification


Super Duplex Pipe Fittings Specification

Available Sizes

Available Sizes :

  • Buttweld : 1/2″ – 36″
  • Welded : 24 – 96″
  • Seamless : 1/2″ – 24″
Common Thickness

Common Thickness :

  • SCH 10, 20, 40, 60
  • SCH 80, 100, 120, 140
  • SCH XS & XXS
Advantage

Advantage :

  • Good impact toughness
  • Better corrosion resistance
  • Good hardness
  • Higher strength than 2205
Melting Point

Melting Point :

  • 1350
Density

Density :

  • 7.8
Working Temperature

Working Temperature :

  • Above +300°C
  • Below -50°C
ISO Standard

ISO Standard :

  • ISO 5251 – butt welding fittings
American Standard

American Standard :

  • ANSI/ ASME B16.9
  • MSS-SP-43
  • MSS SP 75
  • ANSI/ ASME B16.25
Packaging

Packaging

  • Wooden Pallet
  • Carton Box
  • Wooden Cases
Applicable Fluids

Applicable Fluids

  • Water
  • Air
  • Oil and Gas
  • Steam
Connection :

Connection :

  • Bevelled
  • Compound Bevel
  • Plain Bevel
UNS & WERKSTOFF NR

UNS & WERKSTOFF NR :

  • WERKSTOFF NR. = 1.4410
  • Super Duplex 2507 = UNS S32750 / S32760
GOST Standard (Russia)

GOST Standard (Russia) :

  • GOST 17378
  • GOST 17379
  • GOST 17376
  • GOST 17375
Heat Treatment

Heat Treatment

  • Annealed = 1925°F (minimum)F
Material Life

Material Life

  • 40 To 60 years
Manufacturing Method

Manufacturing Method :

  • Rolling
  • Bending
  • Welding
  • Upsetting
  • Hammer
Testing Requirements

Testing Requirements :

  • PMI test
  • HIC test
  • Hyrdrostatic test
  • Ultrasonic test
Method

Method :

  • Welded
  • Buttweld
  • Seamless
Temperature Range

Temperature Range :

  • 1200 – 1025°C
Logistics Types

Logistics Types :

  • By Air
  • By Sea
  • By Train
  • UAE = 6 to 7 day
Nickel Content

Nickel Content :

  • 7%
Bend Angle

Bend Angle :

  • 15°/ 22.5/ 30°
  • 45°/ 60°/ 90°
  • 135°/ 180°
Bending Process

Bending Process :

  • Roll bending
  • Mandrel bending
  • Hot Induction Bending
  • Ram-Type Bending
Radius Of Bend

Radius Of Bend :

  • 3D/ 4D/ 5D
  • 6D/ 8D/ 10D
  • 12D/ 22D
DIN standards

DIN standards :

  • DIN 2617 (Caps)
  • DIN 2616-2 (Concentric)
  • DIN 2605-2 (Elbow)
  • DIN 2605-1 (Elbow)
  • DIN 2616-1 (Eccentric)
Japanese Standard (JIS)

Japanese Standard (JIS) :

  • JIS B2312
  • JIS B2313
European Standards

European Standards :

  • EN 10253-2


For More Information Please Contact US

Super Duplex 90 Degree Elbow Price


Size >Sch 10 UAE Dirham (AED) per unit >Sch 40 UAE Dirham (AED) per unit >Sch 80 UAE Dirham (AED) per unit
1/2 in 4.63 11.02 17.96
3/4 in 9.92 16.53 19.58
1 in 13.15 16.23 33.75
2 in 17.81 28.03 42.02
3 in 35.48 49.33 55.90
4 in 83.19 93.40 100.02
8 in 228.02 230.96 241.32
10 in 401.02 407.45 417.84
12 in 978.30 981.24 991.53
18 in 2217.61 2220.52 2227.05

Find detailed information on ASME B16.9 Elbow Price List


Alloy 2507 45 Degree Elbow Price


Size Sch 10UAE Dirham (AED) per unit Sch 40 UAE Dirham (AED) per unit Sch 80 UAE Dirham (AED) per unit
1/2 in 0.44 6.98 8.83
3/4 in 6.91 6.61 13.40
1 in 12.12 15.41 18.71
2 in 16.18 19.49 26.48
3 in 24.99 28.30 35.44
4 in 50.74 46.70 53.68
8 in 114.08 117.46 124.29
10 in 209.69 209.24 205.28
12 in 489.12 496.08 492.07
18 in 1106.97 1113.90 1113.53

2507 Super Duplex Concentric Reducer Price List


Size Schedule Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
2'' X 1'' SCH 10S US $13.74 50.47
1'' X 1/2'' SCH 10S X 40S US $9.86 36.22
4'' X 1 1/2'' SCH 80S X 40S US $90.68 333.07
4'' X 2'' SCH 40S US $87.79 322.45
4'' X 3'' SCH 40S US $87.77 322.38

SDSS Eccentric Reducer Price List


Size Schedule Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
1 1/2'' X 1'' SCH 10S US $12.82 47.09
4'' X 1 1/2'' SCH 40S X 80S US $87.79 322.45
6'' X 4'' SCH 80S US $230.60 846.99
1'' X 1/2'' SCH 40S US $10.66 39.15
2'' X 1'' SCH 40S US $19.65 72.17
6'' X 3'' SCH 40S X 80S US $145.13 533.06

Super Duplex Reducing Tee Price


Size Schedule Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
2'' X 1'' SCH 10S US $39.48 145.01
3'' X 2'' SCH 10S US $73.48 269.89
4'' X 2'' SCH 10S US $174.93 642.52
1'' X 1/2'' SCH 10S X 40S US $19.22 70.60
3'' X 2'' SCH 40S US $101.00 370.97
4'' X 2'' SCH 80S X 40S US $318.02 1168.09
4'' X 3'' SCH 80S X 40S US $317.03 1164.45

Super Duplex SS 2207 Equal Tee Price


Size Schedule Price In US$ (Dollar) per unit Price in UAE Dirham (AED) per unit
1'' SCH 10S US $20.21 74.23
2'' SCH 10S US $40.60 149.12
6'' SCH 10S US $352.00 1292.90

SAF 2507 Super Duplex Tensile Strength

Temperature In °F 482°F 392°F 302°F 212°F 68°F
Ultimate Tensile Strength in KSI 94 95 98 101 116

Purchasing Alloy 2507 Tee From Super Duplex Pipe Fittings Manufacturer Directly Saves 15% Costing, View Temperature Range & Hardness


Temperature Range Of Alloy 2507 Pipe Fittings

  • -50° to 300° C
  • -58° to 572° F

Hardness For ASTM A815 UNS S32750 Fittings

  • Rockwell C = 32 maximum

Super Duplex 2507 Fittings Manufacturing Standards

Germany Standards (DIN) Europe Standards (EN) Japan Standard (JIS)
  • DIN 2618 (Saddle )
  • DIN 2615-1/2 (Tee)
  • DIN 28011 (Torispherical heads)
  • DIN 2617 (Caps)
  • DIN 2605-1 (Elbow)
  • DIN 2605-2 (Elbow)
  • DIN 2616-2 (Concentric)
  • DIN 2616-1 (Eccentric )
  • EN 10253-4
  • EN 10253-2
  • JIS B2313
  • JIS B2312

Russia Standard (GOST) ISO Standard USA Standards (MSS)
  • GOST 17375
  • GOST 17376
  • GOST 17378
  • GOST 17375
  • GOST 17379
  • ISO 5251
  • MSS-SP-43

Super Duplex Fittings Grade Equivalent

Standard ASTM A815 UNS S32760 Fittings ASTM A815 UNS S32750 Fittings
Grade F55 F53
UNS S32760 S32750
WERKSTOFF NR. 1.4410 1.4410

SDDS Pipe Fittings Density

  • Density (g/cm 3) = 7.8
  • Density (lb/in 3) = 0.281

Super Duplex Stub End Supplier in India offer Visual, Thickness Control & MTR, Refer ASTM A815 WP-S UNS S32750 Pipe Cap Melting Point & Heat Treatment


ASTM A815 UNS S32750 Fittings Melting point

  • Melting Point (°F) = 2460
  • Melting Point (°C) = 1350

ASTM A815 UNS S32750 Fittings Tensile Strength

  • Tensile Strength = 116 KSI

Yield Strength Of WPS S32750 Welded Pipe Fittings

  • 0.1% Offset Yield Strength 0.2% = 91 KSI

Heat Treatment Of Super Duplex Fittings

ASTM A815 UNS S32750 Fittings
1100°C
1925ºF (minimum)

Elastic Modulus Of WPS S32760 Butt Welded Fittings

  • Modulus of Elasticity at 20°C = 200 GPa

A815 UNS S32760 Fittings Hardness

  • Brinell = 270
  • Rockwell C = 28

Heat Treatment Of A815 S32760 WP-S Fittings

  • Solution annealing at 1100°C (2012°F) Water & air

What are the 6 reasons for the rejection of super duplex stainless steel pipe fittings material?

  • The supplied material does not match the specified super duplex grade.
  • The chemical composition of the super duplex stainless steel pipe fittings does not have the required alloying elements and tolerances.
  • The fittings exhibit surface defects like cracks, pitting, scratches, etc.
  • The dimensions do not match the required specifications.
  • The material fails to meet the specified mechanical properties.
  • The material shows signs of corrosion.

These issues can be avoided by purchasing from reputed super duplex fittings manufacturer in India like Vishal Steel.


Super Duplex 2507 Pipe Fittings Grade


UNS S32750 Fittings

UNS S32750 Fittings

UNS S32760 Fittings

UNS S32760 Fittings

Stockist of SA 815 Grade UNS S32750 Reducer For Leak-tight Connections, Check Chemical Composition, Dimensions As Per ASME B16.9

ASME SA815 UNS S32750 Fittings Chemical Composition

Carbon

0.030 max

Chromium

24.00 – 26.00

Phosphorous

0.035 max

Sulphur

0.020 max

Nickel

6.00 – 8.00

Nitrogen

0.24 – 0.32

Molybdenum

3.00 – 5.00

Silicon

0.80 max

Iron

58.095 min

Manganese

1.20 max

ASME SA815 WPX UNS S32750 Fittings Mechanical Properties


Melting Point (°F) Density (lb/in 3) Density (g/cm 3) Melting Point (°C)
2460 0.281 7.8 1350

Super Duplex Pipe Fittings Advantages


Super Duplex Fittings Terminate Pipe Runs

  • Adapters
  • Unions
  • Couplings
  • Plugs
  • Caps

Super Duplex 2507 Pipe Fittings for Direction Change

  • Elbows
  • Tee
  • Cross

Super Duplex Stainless Steel Pipe Fittings Connect Two Or More Pipes

  • Tee
  • Side-inlet Elbow
  • Wye

ASTM A815 UNS S32750 Fittings Use For Size Change

  • Pipe Coupling
  • Pipe Reducer
  • Buttweld Reducing Tee
  • Bushings

Super Duplex Pipe Fittings For Flow Control

  • Valves

2507 Super Duplex Fittings Connection Types

  • Threaded
  • Buttweld
  • Seamless
  • Socket Weld
  • Welded

Magnetic Particle Testing For Super Duplex Stainless Steel Pipe Fittings and SDSS 2507 Pipe Bend Welds, Call Vishal Steel For A Free Quote!,

Super Duplex Elbow Dimensions


Super Duplex Elbow Dimensions

NPS Outer Daimeter Of (D) 45 Degree
(Long Radius)
Center-End Of
(B)		 90 Degree
(Long Radius)
Center-End Of
(A)
1/2 21.3 16 38
3/4 26.7 19 38
1 33.4 22 38
1½ 48.3 29 57
2 60.3 35 76
3 88.9 51 114
4 114.3 64 152
6 168.3 95 229
8 219.1 127 305
10 273 159 381
12 323.8 190 457
16 406.4 254 610
18 457 286 686
20 508 318 762
22 559 343 838
24 610 381 914
28 711 438 1067
30 762 470 1143
32 813 502 1219
34 864 533 1295
36 914 565 1372

Duplex Reducing Tee Weight in KG


NPS Reducing Tee Weight in Kilogram
1/2 0.16
3/4 0.2
1 0.34
1.1/4 0.59
1.1/2 0.91
2 1.59
2.1/2 2.72
3 3.18
3.1/2 4.08
4 5.44
5 9.53
6 15.42
8 24.95

UNS S32760 Fittings Chemical Composition


Carbon

0.05 max

Chromium

24.00 – 26.00

Phosphorous

0.030 max

Sulphur

0.010 max

Nickel

6.00 – 8.00

Nitrogen

0.20 – 0.30

Molybdenum

3.00 – 4.00

Silicon

1.00 max

Iron

57.61 min

Manganese

1.00 max

Different Types Of Super Duplex Buttweld Fittings

Super Duplex Stainless Steel Pipe Fittings

Super Duplex Stainless Steel Pipe Fittings

  • Sizes :
  • BW : 1/2" to 48"
  • SMLS : 2" to 60"
  • Weld : 3/4" to 36"
UNS S32750 Fittings

UNS S32750 Fittings

  • Wall Thickness :
  • Schedule 10/ SCH 20
  • Schedule 40/ SCH 80
  • Schedule 120/ SCH 180
UNS S32760 Fittings

UNS S32760 Fittings

  • Advanced Machines :
  • Conventional Machine
  • Hot Forming Machines
  • Heat Treatment
Super Duplex Elbow

Super Duplex Elbow

  • Elbow & Bend Degree :
  • 30/ 45/ 60/ 90 degree
  • 120/ 140/ 180 degree
  • 1D/ 2D/ 3D/ 4D/ 5D/ 10D
Super Duplex Tee

Super Duplex Tee

  • Dimension :
  • ASME B16.9
  • ASME B16.28
  • ASME B16.11
Super Duplex Reducer

Super Duplex Reducer

  • Thickness :
  • Schedule : 5S/ 10S/ 20S
  • SCH : 40S/ 80S/ 120S
  • Schedule : 140S/ 180S/ SCH XXS
Saf 2507 End Cap

Saf 2507 End Cap

  • Forging Methods :
  • Buttweld
  • Seamless
  • Welded
Alloy 2507 Stub End

Alloy 2507 Stub End

  • Stub End Types :
  • Long Stub end
  • Short Stub end
  • Lap joint stub end
1.4410 Super Duplex Pipe Bend

1.4410 Super Duplex Pipe Bend

  • Sizes :
  • Seamless ½” to 24”
  • Welded ½” to 80”

Common Types Of Super Duplex Socket Weld Fittings

ASTM A815 UNS S32750 Socket Weld 90 Deg Elbow

ASTM A815 UNS S32750 Socket Weld 90 Deg Elbow

  • Standrad :
  • ASME 16.11
  • MSS SP-79
SA 815 Grade UNS S32750 Socket Weld Full Coupling

SA 815 Grade UNS S32750 Socket Weld Full Coupling

  • Material Finish :
  • Pickled finish
  • Electro-galvanized coating
A815 UNS S32750 Socket Weld Hex Head Bushing

A815 UNS S32750 Socket Weld Hex Head Bushing

  • Thread :
  • NPT/ BSPT
  • BSP
ASTM A815 WP-S UNS S32750 Socket Weld Hex Head Plug

ASTM A815 WP-S UNS S32750 Socket Weld Hex Head Plug

  • Thickness :
  • Standard, extra heavy
  • SCH 160, double extra heavy
ASTM A815 WP-S UNS S32760 Socket Weld Reducing Tee

ASTM A815 WP-S UNS S32760 Socket Weld Reducing Tee

  • Testing methods :
  • Magnetic particle test
  • Hardness test
Super Duplex Steel Socket Weld Reducing Cross

Super Duplex Steel Socket Weld Reducing Cross

  • Documentation :
  • Raw material test reports
  • Heat treatment chart

Types Of Super Duplex Threaded Fittings For Sale

2507 Stainless Steel Threaded Coupling

2507 Stainless Steel Threaded Coupling

  • Surface Finish :
  • Mill Finishes
  • Bright annealed
Super Duplex S32750 Threaded Union

Super Duplex S32750 Threaded Union

  • Testing methods :
  • Proof test
  • Tensile test
Saf 2507 Super Duplex Threaded Hex Nipple

Saf 2507 Super Duplex Threaded Hex Nipple

  • Threads :
  • ISO, DIN
  • NPT, BSPT
S32760 Stainless Steel Threaded Tee

S32760 Stainless Steel Threaded Tee

  • Sizes :
  • 1/2” to 4” Inch
  • DN6 ~ DN100
F55 Super Duplex Threaded Hex Head Plug

F55 Super Duplex Threaded Hex Head Plug

  • Method :
  • Socket welding
  • Threaded
Super Duplex F53 Threaded Elbow

Super Duplex F53 Threaded Elbow

  • Pressure Rating :
  • Class 2000 & 3000
  • Class 6000 & 9000

UNS S32760 Super Duplex Stub End Mechanical Properties


Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
7.8 0.281 1350 2460

Manufacturer of Welded/ Bevel Ends Super Duplex 2507 Pipe Fittings, Return Bends and SA 815 Grade UNS S32750 LR/ SR Elbow for High Pressure Pipeline


Super Duplex Pipe Fittings Weight Calculator

Check Online Super Duplex Pipe Fittings Weight Calculator


UNS S32750 Elbow Weight in LBS


Normal Pipe Size Weight In LBS
1/2 0.09
3/4 0.09
1 0.25
1.1/4 0.38
1.1/2 0.4
2 0.81
2.1/2 1.75
3 2.63
3.1/2 3.5
4 4.5
6 12
8 23
10 43
12 62
14 80
16 100
18 126
20 160
22 197
24 238
26 275
30 367
36 531

How does the size of an alloy 2507 tee affect its load-bearing capacity?

Larger alloy 2507 tees come with larger diameters and thicker walls which can handle higher loads and pressures. The larger cross-sectional area also helps to distribute the load over a larger surface, which in turn, reduces the stress concentration.


What are the advantages of using a super duplex 2507 reducer compared to other Grades?

  • Super duplex 2507 buttweld fittings has excellent resistance to localized corrosion, pitting and crevice corrosion.
  • 2507 fittings has higher strength than a standard duplex and austenitic ss.
  • Despite its superior properties, the super duplex 2507 reducer is cost effective.
  • 2507 elbow are used in oil & gas, chemical processing and marine industries due to their versatile properties.

What are the industry certifications that ensure the quality of super duplex stub end?

ASTM A815, ASME B16.9, NACE MR0175/ISO 15156 and PED are the certifications that validate the quality and suitability of super duplex stub end.


Vishal Steel India
Types Of Piping Materials

Vishal Steel India

 

whatsapp chat

Call

x