+91-22-67521137
Contact Person
Gautam Mehta
+91-22-23898841
Factory Address:
Plot No. 749/77/5, G.I.D.C. Estate, Makarpura, Vadodara -390010.
Vishal Steel arrange Third party inspection as per our customer Requirement. Every minimum order is undergo with qualified test by in-house Inspection test plan and the Third Party inspection can be arranged by Reputed Inspection agencies such as Lloyd’s Register India / Bureau Veritas India / TUV India / TUV Rheinland India / Indian Register of Shipping / DNV / Germanischer Lloyd Industrial Services / SGS India etc. if customer want inspection by any other agency can also be arranged.
Normalising annealing
Normalising, also called normalising, is used to eliminate structural irregularities. The material is brought to a temperature above the transformation point. The pipe bends are then cooled in a controlled manner. This process produces a more uniform and finer microstructure. Some materials require subsequent “tempering” in a temperature range of 700-780°C.
Stress-relief annealing
Stress-relief annealing is used to reduce stresses that arise during deformation from the pipe to the pipe bend. Here, too, the elbows are heated to a certain temperature, depending on the material, but not quite as high as in normalising. Subsequently, they are cooled down in the air.
Solution annealing
In solution annealing, pipe elbows made of austenitic steel are heated to a temperature of between 1020°C and 1080°C. They are then rapidly cooled down in a water bath.
Third Party Inspection
Services
Testing
Vishal Steel Supply can provide independent testing services for whatever your requirements call for.
Custom Surfaces
If your requirements call for custom coatings or special surface preparation, just let us know!
Machining and Cutting
